Mesin Pembuat Bal Saluran Pal Pacomat V 50t

PAAL PACOMAT V 50ton 500kg bale

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021102613, Aluminum angle conveyor belt with substructure Conveyor belt length: 2000mm flat + 2200mm inclined Incline angle at bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matte Belt width: 500mm Ppedeh Eld Ejpfx Anwst 21 pcs. T30 cleats welded – pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger splice 40mm wave edge on both sides, high-frequency welded * Edge-free zone on both sides for belt tracking on the incline Continuous support plate Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional frequency inverter control Connection 220/400V, 50Hz, protection class IP54

Kondisi: bekas, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 MOTOR UTAMA 90KW UKURAN PISAU ROTOR 50X50 (PISAU BARU) PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM MESIN 100% BERFUNGSI Ppjdpfx Aetqd Ndsnwst SIAP DIGUNAKAN

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Pjdpfxovf E Avo Anwjpt Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2006,

Kondisi: baru, Tahun pembuatan: 2023, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.200 kg, jenis bahan bakar: diesel, warna: beige, daya: 513 kW (697,49 hp), tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 408 kW (554,72 hp), daya nominal (semu): 510 kVA, daya kontinu: 368 kW (500,34 hp), panjang total: 4.460 mm, lebar total: 1.606 mm, tinggi total: 2.493 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: Doosan, jenis pendinginan: air,

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Ppsdpfxera Nrxe Anwjt Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: siap digunakan (bekas), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of residual materials (recyclables) in industrial and commercial settings: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials. Podpfxera A E Uj Anwopt Horizontal baler, DIXI 60 SLD waste press with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800 x 1100 x 1200 mm - Number of ties: 3 - Bale weight: approx. 370-410 kg - Tying: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5420 kg - Average press cycle: 47 sec - Year of manufacture: 2011-2016 Dixi 80SLD Baler Baler Technical Data Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4200 mm (+ cage 1600 mm) - Width: 1830 mm - Height: 2620 mm - Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Kondisi: baru, Tahun pembuatan: 2025, Daya motor 7,5 kW - Gaya pemotongan 30 ton Saluran pemotongan dirancang untuk - panjang rol maks. 1500 mm - diameter rol maks. 850 mm - Berat mesin sekitar 3.500 kg - Kapasitas tangki sekitar 110 liter - Kisi pelindung tangan di area panel kontrol dan sisi seberangnya Ppodpsgl Adzofx Anwjt - Pengunci pisau - Meja pemisah model lurus - Dokumentasi 2 rangkap dalam bahasa Jerman (1x bentuk teks, 1x CD) - Warna RAL 5012 - biru muda Kisi pelindung/palang pisau RAL 1028 kuning melon Mesin tersedia di gudang dan siap dikirim segera Harga dan informasi lebih lanjut atas permintaan

Kondisi: baru, Hopper opening: 2,500 x 2,000 mm Rotors: 2 units Rotor swing diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Podpfx Anebq St Howjpt Drive: 2 x 90 kW with planetary gearboxes Hydraulic screen basket locking for contaminant discharge Weight: approx. 18,500 kg

Tahun pembuatan: 1988, Kondisi: baik (bekas), Kompletter Atlas Copco Kompressor inklusive Donaldson Ultra-Filter und Behälter, in gutem Betriebszustand. Psdpohpx U Ajfx Anwspt