Pemuat samping

Baumann DX40/12/45

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Podpfot Hagnjx Ab Ierd Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: bekas, Tahun pembuatan: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle. Air cushion table with two-axis control for the left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW (shared motor with left spindle) 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Predswwwkhopfx Ab Ijd Speed: 6000 rpm 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 5th spindle: bottom Spindle diameter: 40 mm Motor power: 11.0 kW Speed: 6000 rpm Clamping length: 270 mm 6th spindle: top Chamfer unit Spindle motor brakes: mechanical Height adjustment for upper spindle: electric Optional: with/without feed Feed brake system: yes Feed speed: infinitely variable up to 3 - 23 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: cardan shaft Lubrication pump: manual Max. planing depth: 10 mm Jointing rebate cutter: yes Driven rollers in the table: 1 pc. Control type: PLC control Spindle position display: mechanical indicator Infeed rollers before jointer: yes Air cushion table: three-rail Central lubrication point: yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Kondisi: bekas, Tahun pembuatan: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400V, Dyn5-11-1 configuration, protection class IP23 or IP00, forced-air ventilation (AF), aluminium/aluminium windings, temperature monitoring unit, fully functional, in very good condition, 2 units available Pjdpfoquwtxsx Ab Ierd

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 625 mm, Hundegger joinery machine with mechanization 5 axes Working width: 625 mm with tools Podjv Ubtcjpfx Ab Ijrd

Tahun pembuatan: 1990, Kondisi: baik (bekas), Used side loader Kalmar, The machine has been well maintained. For further details, please refer to the pictures. Podpeh Et E Njfx Ab Ierd

Kondisi: baik (bekas), Robot industri Produsen: Kuka Tipe: KR6, KR6-2, KR6arc Tipe: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Predstuc U Repfx Ab Isd semua tipe dengan kontrol KRC2ed05 Kuka KR6 KRC2ed05 tahun produksi 2006 Kuka KR6-2 KRC2ed05 tahun produksi 2011 Kuka KR6arc KRC2ed05 tahun produksi 2006-2007 = beberapa unit tersedia di stok Kuka KR16L6 KRC2ed05 tahun produksi 2009 Kuka KR16L6-2 KRC2ed05 tahun produksi 2011 Kuka KR16 KRC2ed05 tahun produksi 2007-2009 = beberapa unit tersedia di stok Kuka KR16-2 KRC2ed05 tahun produksi 2010-2012 = beberapa unit tersedia di stok Kuka KR16-2 Speed KRC2ed05 tahun produksi 2012 = beberapa unit tersedia di stok Kuka KR16-2 Foundry KRC2ed05 tahun produksi 2012

Kondisi: baru, Load capacity 500 kg Number of suction pads: 6 Diameter of suction pads: 215 mm Pjdeq Sc Auspfx Ab Ierd Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing steel construction, painted in RAL 2000, with low dead weight. Consisting of: - 1x Galvanised longitudinal beam, length 2,400 mm - 3x Galvanised crossbeams, length 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction pad holders - 6x Suction pads Ø 215 mm; in case of wear, seals can be inexpensively replaced without tools, separate from their metal carrier - 6x Ball valves to individually shut off suction pads, allowing smaller formats to be lifted without having to move the pads or beams - 1x Spiral connection cable, small coil: * Extension length 3,500 mm, designed as extension cable with CEE plug and socket * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and no neutral conductor is present) - Operating handle extendable up to 1,000 mm from the centre of the beam - Stable sheet metal pocket for your crane controls included, at no extra charge - Operation "Suction / Release" via hand slide valve: Wear-free and very robust hand slide valve ensures secure suction and release following actuation of the release button (double release according to EN 13155) - Control and safety device for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum accumulator tank with safety non-return valve * Double release operation when unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easily understood documentation Guarantee against material and manufacturing defects for one year under single-shift operation (excluding wear parts). Initial safety inspection UVV 18, VBG 9a, with CE declaration of conformity – according to EN 13155 - Packaging for truck transport.

Tahun pembuatan: 1992, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: Div1, Demag KBK 1 column-mounted slewing crane NL 125KG with chain hoist Technical Specifications: Pjdpfx Asng H T Ujb Iord Payload at full outreach: 125KG / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Jib outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450Kg Fitted either with steel or Demag chain hoist 125Kg, depending on stock Including pins, cable trolley, travelling gear, end cap, etc. Multiple cranes in stock Slewing range: 300°, 400V 16A connection Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, load capacities from 80 to 5000Kg, please enquire See pictures Shipping via freight forwarder or collection by appointment only

Tahun pembuatan: 2006, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: W144, Technical data: 1 Demag KBK pillar-mounted slewing crane, SWL 50 kg Safe working load (SWL) at maximum outreach: 50 kg Height: approx. 3.8 m, Underside of jib: approx. 3.3 m Outreach: approx. 5 m, Hook height: approx. 2.95 m Total weight: approx. 300 kg Equipped with 125 kg Stahl ST electric chain hoist with pendant control (2 lifting speeds) Connection: 400V, 16A, Slewing range: 270° Crane is dismantled and packed on a pallet Inspection logbook available Very good condition, see pictures Item location: 75053 Gondelsheim Pjdpfx Aep Artdjb Iord Only the crane system shown in the pictures is for sale Shipping via freight forwarder or collection by appointment

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam Podpfx Absu R Szas Ijrd (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -