PENGGULUNG BIBIR

BELLAFORM RR 150-4 MIT ZÄHLSTATION

Kondisi: hampir baru (bekas), Set, packed in a wooden crate, screw and barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Gtodpfx Adodm Aghstet

Kondisi: bekas, Tahun pembuatan: 1985, Berat: sekitar 3000 kg Dimensi: sekitar 3700 x 2000 x 1600 mm Lokasi penyimpanan: Nattheim Gedpfx Aevvi Ttodtett

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 403, Equipment / Additional Information: Unwinding Device: Roll Holding: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Gtsdpfx Asn D Ew Isdtjt Max. Tool Dimensions: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Power Upper Heater: 18.8 kW Installed Power Lower Heater: 14.1 kW Idle Cycle Rate: 40 cycles/min Main Drive Motor Power: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: approx. 30 l/h Air Consumption at 7 kg/cm²: approx. 125 l/cycle Total Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending cup, Capacity = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup, Capacity = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup, Capacity brimful = 140 ml / Capacity at 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealable rim ⌀ 75–120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup, Capacity = 80 ml 595 // 456 // 10 // Vending cup, Capacity = 150 ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granulate cup 180 ml / technical part with flat sealing rim

Tahun pembuatan: 2006, jam operasional: 15.000 h, Kondisi: baik (bekas), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput capacity: 250-350 kg/h Gtedpfx Ajumubyodtst Currently, the system is processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, norwegian-01 Godpfx Aemgc I Njdtjtt

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Gsdpfx Ast R T Hcsdtett

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs ( Godpfx Aded Rzc Rotstt

Kondisi: bekas, Planing and moulding machine Weinig Hydromat 2000 for four-sided planing and profiling of timber with grooved bed, without soundproof enclosure. Spindles: 5 Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Gtjdpfxermvhfo Adtjt Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Working width: 230 mm Working height: 160 mm Spindle diameter: 50 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Sawmill line Stravis with Jabłoński automatic edger, fully renovated. Condition as new. The line includes: 1. Log conveyor for logs up to 5m with cascade feeder 2. Chain caterpillar sawmill 110 + 90 kW 3. Multi-blade saw (2 x 75 kW), spindle diameter 80mm 4. Roller conveyor, length 6m, with left cant stop mechanism 5. Cross-cut saw from 0.8 m to 5m 6. Reference conveyor 7. Roller conveyor, length 3.5m 8. Powered roller conveyor, length 4.5m 9. Powered roller conveyor, length 4.0m, with board discharge mechanism 10. Transverse belt conveyor, width=3m, length=5m Gtsdpfxov Iyhfj Adtjt 11. Transverse belt conveyor with carrier, width=2m, length=5m 12. Longitudinal belt conveyor, width=0.4m, length=5m 13. Jabłoński automatic edger 14. Jabłoński "goose neck" (curved outfeed) 15. Transverse feeder with board width measuring scanner 16. Centering system for edger 17 17. Slab separator 18. Cross-cut saw from 0.8 m to 3.0 m 19. "Goose neck" outfeed 20. Jabłoński automatic stacker 21. Unrefurbished Jabłoński cross-cut saw 22. Bruks chipper with control system (requires fabrication of a belt or vibrating chute) Installation and commissioning at Customer site possible. Videos of the machine in operation before refurbishment available. The line can be configured in a return loop or linear layout. Option to construct a support base for the line. SPECIAL OFFER

Kondisi: bekas, Weinig Profimat 22 A 4 left mobile unit with measuring sensor, enabling automatic adjustment based on the width of the workpieces being processed. Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet). Gsdpsryb D Ssfx Adtjtt