Bandsaw - horizontal

BERG & SCHMID DGS 500/600 HA-I

Kondisi: baru, Tahun pembuatan: 2025, Cutting diameter 335 mm Saw band length 4400 x 34 x 1.1 mm Table height 750 mm Feed rate 5 - 2300 mm per stroke Cutting range at 90°: flat 500 x 335 mm Cutting range at 45°: round 330 mm Cutting range at 45°: flat 320 x 335 mm Cutting range at 45°: round (left) 305 mm Cutting range at 45°: flat (left) 305 x 335 mm Cutting range at 30°: round 180 mm Cutting range at 30°: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety access according to CE standards via light barrier - MEBA automatic bandsaw in proven twin-column linear design with integrated MEBA gripper feed system from 5 - 2300 mm per stroke - MEBA visualised program input with CNC control Fully automatic operation for any angle setting from 30° - 135°, length, and quantity. Simple program creation and management for up to 255 programs. Operations staff enter the sawing task using the display template with a cut diagram. Input errors are minimized, ensuring easy and secure creation of production orders by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring. This ensures optimum conditions for each sawing task, i.e., constant pressure for solid materials and constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive with max. stroke length of 2300 mm, including integrated roller conveyor up to 3000 mm. - Both-sided opening of the gripper feed system clamping jaws. Ribbed bars for handling heavy materials. - Saw frame constructed from robust, low-vibration steel welded structure. - Saw band inclined 3° to the material support surface for highest cutting performance and blade life when cutting structural steel profiles. - Combined saw band guide, precision bearings for gentle band guiding. Chamfered carbide slide guides for saw band guidance. - Mitre pivot point (zero point) is the intersection between the saw band and the fixed clamping jaw, meaning no change in length measurement when changing the angle. Automatic calculation of kerf width at each angle position. Ndjdpfjulnb Dox Ab Ejd - NC angle programming. Control panel is free-standing as standard on these machines. - Patented twin-mitre vice system (ERP no.) Automatic movement of clamping vices. The material clamping vice automatically moves with the desired mitre in the throughput direction, so the material is always clamped square and close to the saw band. Material clamping is performed using full-stroke cylinders. - Rapid lowering of the saw frame via automatic height adjustment bar until just above the material. For serial cuts, the saw frame only lifts shortly above the material, and a new workpiece can be positioned. Optimal cycle times for single and serial cutting. - AC frequency-controlled saw band drive, steplessly adjustable from 15 - 150 m/min - Zero-play preloaded, low-maintenance recirculating ball linear guides for material feed and saw frame advance for smooth, jerk-free operation...

Kondisi: baru, Working area: approximately 360 mm Working area quadrant: 360 x 360 mm Working area bundle W x H: 180 - 280 x 50 - 160 mm Cutting speed: 20 - 100 m/min (stepless adjustment) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tension: hydraulic Ndsdpfx Abeqrqvhs Esd Multiple feed: 500 mm Drive power: 3.7 kW Machine dimensions L x W: 2,500 x 2,200 mm Machine weight: 2,300 kg Standard equipment: - Hydraulically controlled full-stroke double vice clamping system - Drive via IE3 motor with frequency inverter (PMSM, complies with IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed speed display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vise - Split front vise - Infinitely variable speed control via inverter - Hydraulic blade tensioning - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control via rapid approach sensor - Preset cut counter with shut-off - Nesting fixture for bundle cutting (hold-down device) - Powered blade cleaning brush - Saw blade monitoring for idle and blade breakage - Rinse hose for machine cleaning - Work light - Roller table, 2 m long - One M42 bi-metal saw blade - One set of tools and a toolbox

Kondisi: baru, Cutting range at 90 degrees: round 255 mm Cutting range at 90 degrees: square 240 mm Cutting range at 90 degrees: rectangular 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 18 - 110 m/min Total power requirement 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-miter metal band saw, frequency inverter hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° / right 45° • Material height sensor (automatic cutting start recognition) • Frame and gearbox made from a single casting, very quiet operation and extremely low vibration • Hydraulic vice, laterally adjustable • Precision-guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable hydraulic feed pressure • Infeed support roller • Ball-bearing-mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid traverse to material or, for serial cuts, start cutting immediately 4. Switch off saw blade 5. Raise frame to just above material 6. Open vice Ndjdpfxsfgyh Ue Ab Ejd

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support Njdpfjfgyicjx Ab Eodd · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Tahun pembuatan: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Nodpfx Abeg Tdpge Ejdd Table diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: baru,

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel Nodpfjd Iipmjx Ab Eodd • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: baik (bekas), Tahun pembuatan: 1991, 1 mesin frais alat universal bekas Pabrikan: Deckel Tipe: FP 1 dengan tampilan digital aktif Heidenhain Tahun pembuatan: 1991 Data teknis: Pergerakan X: 300 mm Pergerakan Y: 160 mm Pergerakan Z: 340 mm Konektor spindel: SK 40 Stroke pinol vertikal: 60 mm Ukuran meja: 600x210 mm Kecepatan spindel: 40-2000 rpm Berat mesin sekitar: 1 t Daya listrik: 7,5 kW Dimensi ruang: kira-kira 1,6x1,3x1,8 m dilengkapi dengan meja tetap meja putar pembagi universal berbagai holder alat penyangga horizontal Ndsdpfsw Sdmdjx Ab Ejd

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Ndsdjiqkc Iepfx Ab Esd Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, SK 40/20x2 - Fixed angle table 210 x 600 mm, NEW! - Retrofit safety device for milling spindle, electrically secured, NEW! - Active digital display (TNC113), 3 axes - Coolant system - Machine lamp - Machine feet Nodpfx Abowgafys Eodd - Documentation Condition: Good, mechanics and control system workshop-tested