Bandsaw - horizontal

BERG & SCHMID GBS 305 AutoCut

Kondisi: baru, Cutting diameter 280 mm Saw band length 3370 mm Cutting width 350 mm Band saw dimensions 3370 x 27 x 0.9 mm Cutting capacity at 90° round 280 mm Cutting capacity at 90° square 250 mm Cutting capacity at 90° rectangle 350 x 200 mm Cutting capacity at 45° round 240 mm Cutting capacity at 45° square 220 mm Cutting capacity at 45° rectangle 230 x 220 mm Dedpfxjivuqtj Adgeul Cutting capacity at 60° round 170 mm Cutting capacity at 60° square 150 mm Cutting capacity at 60° flat 170 x 100 mm Band saw speed 37 + 74 m/min Total power requirement 1.8 kW Machine weight approx. 0.6 t Space requirement approx. 1.5 x 1.7 x 2.0 m

Kondisi: baru, Tahun pembuatan: 2025, Ex-display unit available immediately: New Kaeser SK 25 T - 10 bar Screw Compressor with Integrated Refrigeration Dryer Dusdpfodrc Txox Adgol Pressure: 10 bar Rated power: 15 kW Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Attractive leasing options for new machines available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Dodpsfd Abajfx Adgeul Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Tahun pembuatan: 2025, Quick mitre adjustment from 30° to 150° steplessly with 0.5° accuracy according to scale. The mitre pivot point is the intersection between the saw blade and the material support, which means there is no change in length measurement. Stops at 30° and 45° on both left and right sides. Manual material clamping. At any frame angle, the material is clamped parallel at 90°. Cutting pressure reduction via the dead weight of the robust, torsion-resistant saw frame and fine adjustment based on material cross-section through hydraulic damping cylinder. Djdebi S Diepfx Adgeul Standard built-in coolant system, optionally upgradable with a micro-dosing unit. Machine stand with integrated chip collection tray. Saw blade drive with automatic shut-off. Precise saw blade carbide roller guide. Paint finish in silver-grey / blue-grey (RAL 7001 / RAL 7031). 1 saw blade mounted on the machine, 4/6 TPI. Operating manual and spare parts list supplied on CD-ROM. Optional equipment: Hydraulic lifting of the saw frame. Design: Manual Mitre Cutting Capacities: 30° left: Ø 130 mm; square 120x120 mm 45° left: Ø 200 mm; square 180x180 mm 90°: round Ø 260 mm; square 300x260 mm 45° right: Ø 200 mm; square 180x180 mm 30° right: Ø 130 mm; square 120x120 mm Motor: [kW] 1.8 Saw blade: [mm] 3350x27x0.9 Blade speed: 35/75 m/min Working height: [mm] 900

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Treif pemotong bacon Tipe Felix 100 Dengan pisau pemotong 20x20 mm Tahun pembuatan 2017 Dujdsw Rc Nbopfx Adgol Ukuran pisau pemotong lain tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut per lengan kantilever: 500 kg, tinggi rak: 3.200 mm, panjang total: 2.100 mm, tinggi total: 3.200 mm, jarak gandar: 1.000 mm, kapasitas beban per penyangga: 2.500 kg, Cantilever racking, hot-dip galvanized design: Scope of delivery: - 3 rack uprights, height 3.2 m, with base section, 1.8 m usable depth (total depth 2 m) - 12 cantilever arms with 1.8 m usable depth (for chipboards approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing: 1.3 m) - Fastening materials (bolts, nuts, and washers) Net price: €2,490.00 plus VAT Detailed description: - Robust steel structure made from IPE sections (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms: 1,800 mm usable depth - (For chipboard panels up to 2,100 mm deep) - Cantilever arms are height-adjustable in 100 mm increments - Each upright fitted with 4 bolted cantilever arms as standard (= 5 storage levels) - Load capacity per arm: 500 kg - Including longitudinal and diagonal braces for 1,000 mm upright spacing - Rack length: 2,100 mm - Inclusive of fastening material (without floor anchors) - Includes assembly instructions and C4 load labels in accordance with DIN standards Dusdpfx Adsqt Dmyegsl - Made in Germany - Short delivery times Our cantilever racks are manufactured exclusively in Germany. We provide reliable transport with advance delivery notification. The material is sensibly packaged to facilitate easy unloading. Delivery for stock items can be made approx. 1 week after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixing, and able to support the required loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to professional industry guidelines, it is recommended that the uprights have a minimum 500 mm projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2025, Material width 100 mm Material thickness 15 mm Dedpfsurni Uox Adgsul Number of straightening rollers 9 Straightening speed 7 m/min Total power requirement 0.75 kW Machine weight approx. 380 kg Space requirement approx. 710 x 920 x 1360 mm Equipment/features: - 5 powered lower rollers - 4 adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile on castors - Operating manual

Kondisi: baru, Machine in stock and immediately available Double Miter Metal Bandsaw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power consumption S6 40%: 2.2 kW Working height: 930 mm Features: - Double miter saw with swiveling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, steel, etc. for industrial applications - Generously sized cast saw arm for low-vibration operation - Equipped with 2 saw band speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - CE/IEC compliant, German documentation and German service support Scope of delivery: - Saw band - Material stop - Pressure gauge (band tension) - Carbide saw band guides - Vice with quick-release - Integrated coolant system - Hydraulic bow lowering - Motor protection switch Djdpfxed R Sipj Adgoul - Automatic end stop - Base frame

Kondisi: baru, Cutting capacity at 90 degrees: round 250 mm Dsdpfx Adsfgyh Rogeul Cutting capacity at 90 degrees: square 210 mm Cutting capacity at 90 degrees: rectangular 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTION PRICE!!! (20347) Double mitre metal bandsaw with: - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for quick mitre adjustment - Movable quick-release vice - Quick release lever - Automatic coolant system

Kondisi: baru, Swing diameter over bed 410 mm Swing diameter over cross slide 240 mm Turning length 1000 mm Duedom Rlb Nepfx Adgjl Swing diameter in the gap 530 mm Spindle speed 65 - 1810 rpm Centre height 205 mm Spindle bore 52 mm Tailstock quill taper MK 4 Total power requirement 2.2 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.3 m Lead and feed screw lathe with: 3-axis digital readout system, fully assembled Electromagnetic main spindle brake Automatic feed in longitudinal and face directions Safety relay Micrometer end stop Coolant system 3-jaw chuck with one set each of turning and boring jaws German operating manual.