Bandsaw - Horizontal

BERG & SCHMID K-tech DG 50/33 HA-I

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition Klodjh Ayyqopfx Ac Hjn The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Complete set incl. hand and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Kljdpfx Aom Ew Stoc Hon Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Diameter of face plate: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.7 rpm.

Kondisi: siap digunakan (bekas), Max. operating overpressure: 11 bar, motor speed: 2,945 rpm, rated power: 30 kW, operating hours: 67,212 h. Kedpfx Ael Eyq Rsc Hsln

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Kodjd Iipmepfx Ac Heln Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Tahun pembuatan: 2009, Kondisi: baik (bekas), Lifting capacity: 30 t Precision lift Lifting height: 9 meters Kljdsqiz N Ropfx Ac Hen

Kondisi: baru, Tahun pembuatan: 2025, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table size: 560 mm - Door left: 170 mm - Electrically tiltable - Foot pedal - Documentation Kjdpfx Acjgg Rb Te Heln - 230V

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Ksdpfx Asd N H A Njc Hjln Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: baru, ROGI SAWING MACHINE TYPE CY355 INVERTER VARIABLE SPEED SEMI-AUTOMATIC Saw Blade Dimensions ----- 3770 x 34 x 1.1 mm Saw Blade Speeds ----- variable 20-80 m/min Kljdega Tzxopfx Ac Hjn Motor Power ----- 2.2 kW - 400V - 3 Phase Weight ----- 855 kg Cutting Capacity 90° ----- 355 mm / 490 x 300 mm Cutting Capacity 60° ----- 230 mm / 180 x 220 mm Cutting Capacity 45° ----- 350 mm / 290 x 340 mm Cutting Capacity -45° ----- 290 mm / 250 x 250 mm INCLUDES Saw Blade Workpiece Stop Base Cabinet Saw Blade Tension Manometer Saw Blade Guide with Carbide Inserts Hydraulic Quick-Release Vice Coolant Pump Hydraulic Drop Cylinder Motor Protection Switch Automatic End Stop

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Kledpfx Ajfxgp Uec Hen Rotational speed: 0.03 - 1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A

Kondisi: bekas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 including clamping unit kg Internal spindle mounting: 70 mm Klodpov I Eq Sefx Ac Hon Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m Immediately available, naturally with a 12-month warranty! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality!!! - Digital display on 2 axes. Resolution on the X-axis: 0.5µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request The machine tool does not currently meet the basic safety and protection requirements as specified in BetrSichV 2015. An increase to the required minimum safety objective must be determined via a risk assessment according to BetrSichV.