Ruang semprot dengan plafon udara masuk

Berkmann

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang total: 7.000 mm, lebar total: 4.000 mm, tinggi total: 3.130 mm, tinggi dalam: 2.700 mm, panjang dalam: 6.900 mm, lebar dalam: 3.900 mm, Perlengkapan: kabin, The automotive paint booth is a fundamental device in paint repair technology, enabling painting operations to be carried out in safe and comfortable conditions, while simultaneously minimizing their negative impact on the immediate environment and surroundings. Specifications: - External dimensions: 7000x4000x3130 mm - Internal dimensions: 6900x3900x2700 mm - Entrance gate: 3000x2600 mm (three-leaf) - Service door: 640x1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS styrofoam - Total power: 7kW - Installation: indoor Paint booth wall construction: - Thickness 50mm - Insulation: EPS styrofoam - Color: white Base of the paint booth: - Booth installed directly on the floor/screed - Installation only indoors Double roof: - Upper external layer: - Corrugated sheet metal panels - Internal structure: - Partially latticed Air exchange system (supply system): - Jet turbine 5.5kW – 1 unit - Capacity: 20,000m³/h - Belt drive - No air circulation control Lighting (Side lights): - 20 side lamps - No option to install top lighting Air heating system: Fpodpfx Adsxnbf Uegeb Single-stage oil burner Riello G10 54–120 kW - Manual burner control - Heating time: 20 min Communication within the paint booth: Main doors: - Dimensions 3200x2600 mm - 3-leaf door system Service doors: - Booth equipped with service door - Pressure locks Paint booth filtration: - Inlet/Air intake: Pre-filter Ceiling filter: Main filtration (high-flow) Filter specification: - Weight – 600g/m³ - Thickness – 50 mm - Air flow – 900m³/h - Filtration efficiency – 97% - Air speed – 0.25 m/s - Dust holding – 650g/m³ - Max. temp. – 100°C - Filtration class (EN 779) – M5 - Fire resistance (DIN 53438) – F1

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm Fedpfx Adovu Hghogspb > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Kondisi: bekas, Tahun pembuatan: 1985, Berat: sekitar 3000 kg Dimensi: sekitar 3700 x 2000 x 1600 mm Lokasi penyimpanan: Nattheim Fpedpovvi Ttofx Adgjb

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 9 kW (12,24 hp), Ott veneer press Fpedstwp Iwjpfx Adgeb Connection rating: 380V, 9kW Plate size: 2250 x 1350 mm Elkom heating plates, gold-anodised Plates and hydraulics in good condition

Kondisi: bekas, Weinig Unicontrol 10 (UC 10) angle processing line for the production of windows, components, and doors. Suitable for frame-based, series, or single-part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units/equipment: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm Fpedpfxsv Ag Tds Adgob 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 5. Profile milling unit, horizontal, from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Twin part package - Rebating package with rebate carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window configuration - Unit for bottom edge rounding with crosscut saw - Glazing bar support rail - Including extraction duct system - Including Oertli tool set - Further technical data and tooling diagrams available on request.

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Fpedpjt R T Hcefx Adgob

Kondisi: bekas, ALREADY DISMANTLED ‼️ IMMEDIATELY AVAILABLE ‼️ 🔥 Gilles 300 kW Wood Chip Boiler for Sale – Reliable Industrial Biomass Technology! 🔥 Industrial-scale heating solution with Austrian precision! The Gilles 300 kW boiler is the ideal choice for larger facilities, sites, grain dryers or central heating systems. Key features: 🌲 Fuels: Wood chips, pellets, biomass – wide fuel compatibility ⚡ 300 kW heating output – reliable and efficient for heavy-duty users Fsdpfep Am Rgjx Adgopb 🔄 Automatic feeding, combustion control, ash removal – minimal personnel required Fsbjp Am Rgettvc Hmjpk 🧠 Modern control system, optimized combustion ♻️ High efficiency, low emissions 🇦🇹 Gilles = Austrian quality, industrial reliability 💥💰 PRICE: 9,900 EUR – GOOD CONDITION, READY FOR INDUSTRIAL USE! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Industrial boilers, biomass solutions, experienced and competent.

Kondisi: siap digunakan (bekas), Dijual: konveyor sabuk seperti pada foto, panjang sekitar 8 m. Lebar sabuk: 0,3 m. Tersedia opsi transportasi. Fsdpfjr Nvx Usx Adgjpb

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Fpjdpfxsvu Hfqo Adgeb Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: bekas, Tahun pembuatan: 2000, unit pemasok bekas Tahun pembuatan: 2000 cocok untuk mesin pengamplasan tepi Kündig Uniq Data teknis: Fpjdpeumpp Ejfx Adgsb jangkauan maksimum: 1050 mm jumlah rol pemasok: 4 diameter rol: 120 mm lebar rol: 60 mm jarak pegas rol: 25 mm jumlah tingkat kecepatan: 8 (2/4/5,5/6,5/11/13/16,5/33 m/menit) daya motor: 0,75 kW koneksi: 400V/50 Hz berat: 32,5 kg Konsol yang terlihat di foto tidak termasuk dalam pengiriman! Lokasi: Flörsheim Ketersediaan: Segera