Unit hisap

Bernado DC-500-E

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Bledpfx Aeu Rptyjiyeh Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Tahun pembuatan: 2007, jam operasional: 4.100 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin ini sudah tidak dibutuhkan lagi untuk produksi kami dan oleh karena itu dijual. Mesin ini milik kami sejak tahun 2007 dan selalu dilakukan perawatan rutin. Semua berfungsi normal. Pembongkaran dan pemuatan ke truk sudah termasuk dalam harga. Bsdpfx Aijwwtw Djyolh Informasi lebih lanjut: Pusat pemesinan profil 5-sumbu Dirancang untuk pemesinan aluminium yang fleksibel dan efisien Posisi penjepit otomatis Panjang kerja maksimum: 9.300 mm 12 penjepit pneumatik Majalah alat berkapasitas 20 alat dan pisau gergaji 500mm Jam kerja spindle: 4100 jam Spesifikasi teknis tambahan tersedia atas permintaan.

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.323.36002, 22621 Technical Specifications: - Maximum working length: 3500 mm - Frame gap/Distance between uprights: 3050 mm - Maximum pressing force: 2000 kN - Distance table/ram (max.): 480 mm - Throat depth: 260 mm - Ram stroke approx.: 300 mm - Stroke speeds: - Downward rapid traverse (max.): 100 mm/sec - Upward speed: 80 mm/sec - Pressing speed (downward, max.): 10 mm/sec - Total drive power: 25 kW Bledjip Nikepfx Aiyjh - Installation dimensions (approx.): W 4500 x H 3150 x D 2100 mm - Weight (approx.): 16,000 kg Includes: - CNC control (CYBELEC), renewed in 2008 - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment, 5 - 1000 mm - Hydraulic tool clamping - Top tool and universal die - Sheet supports - Two-hand control console

Tahun pembuatan: 1986, Kondisi: baik (bekas), nomor mesin/kendaraan: 106157, 21035 Blsdeg A Rgfspfx Aiyjh

Kondisi: baik (bekas), diameter mata gergaji: 400 mm, – Double mitre – Minimum quantity lubrication system (MQL) – Protective cap – 400V Bsdpeim Ezgjfx Aiyolh

Kondisi: bekas, Tahun pembuatan: 1983, Saw blade diameter 400 mm Cutting diameter 130 mm Stroke 150 mm Cutting area, square 120 x 120 mm Bodpfx Aietqqrzeyelh Cutting area, flat 300 x 40 mm Cutting area at 45 degrees: round 130 mm Cutting area at 45 degrees: square 110 x 110 mm Cutting area at 45 degrees: flat 245 x 40 mm Mitre cuts - double-sided 90° Cutting speed 13 / 25 m/min Control Minipos 807 Total connected load 4.3 kW Machine weight approx. 850 kg Machine dimensions (L x W x H) 1.20 x 1.20 x 1.82 m Accessories: Infeed and outfeed roller conveyors, each approx. 4000 mm long, NC-stop, coolant system

Tahun pembuatan: 1980, Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Bsdof D H Hbspfx Aiyjlh

Kondisi: bekas, Tahun pembuatan: 2005, Operating pressure: 10 bar Flow rate: 2.66 m³ / min Total power requirement: 18.5 kW Motor speed: 3000 rpm Blsdpfxsvuz Rhs Aiyeh Dimensions: 1200 x 900 x 1200 mm Machine weight: approx. 150 kg Operating hours: 4,930 h Next service in: 2,962 h

Kondisi: baru, translation-01 Bedpfexaa Ixjx Aiyolh

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch Blsdjvv Etvspfx Aiysh >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.