Lathe-conventional-electronic

BERNARDO SMART 410-1000 PRO VARIO

Kondisi: baru, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Spindle speed range, 2 steps: 30 – 550 / 550 – 3000 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Dwedpjxl Tarofx Agqsd Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Tailstock quill diameter: 50 mm Tailstock quill travel: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx.: 1145 kg Features • Standard equipped with Delta frequency inverter for high torque at low speed and nearly constant speed under load • Infinitely variable speed control, set speed is displayed digitally • Prism bed made of cast iron, induction hardened and precision ground • Central, user-friendly control for feeds and threads with lead and feed screw • Modern main spindle bearing with precision angular contact ball bearings • Frequency inverter and 3-axis digital readout included as standard • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed adjustments are simple, smooth-running, and precisely switchable • Sliding tailstock for taper turning, handwheel with adjustable fine scaling (0.02 mm) • Removable gap enables machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with brake function, CE-compliant • Four-way toolpost • Guard for four-way toolpost • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial filling with Shell Tellus 46 • Coolant system • Slip clutch • Threading dial • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Kondisi: baik (bekas), NHH lathe Model: 1N611N Swing over bed: 260 mm Dwedpeqgdkisfx Agqsd Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions: 150x85x155 cm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2026, diameter putar di atas sled silang: 255 mm, lubang spindel: 52 mm, diameter pembubutan: 420 mm, panjang pembubutan: 1.000 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 30 rpm, berat keseluruhan: 1.145 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Universal lathe Smart 410 Pro Vario is a professional machine designed for light and medium-duty turning operations. By combining advanced electronics with robust mechanics, this model offers an ideal solution for mechanical workshops, tool rooms, and maintenance departments. Key Features: - Bed made of cast iron, induction hardened and precisely ground - Mechanical foot brake reducing downtime - Removable bridge for machining larger workpieces - Smooth and quiet operation thanks to hardened and ground gearbox gears - Simple and quick adjustment of feed and speed - Solid construction ensures vibration-free operation - Sliding tailstock system for taper turning, handwheel with precise scale (0.02 mm) - Central switching system for feed and threading, equipped with leadscrew and feed shaft - Modern main spindle bearing with precision angular ball bearing - 3-axis digital display included - Stepless spindle speed control based on an inverter, with digital readout, for perfect adjustment to the workpiece Technical Specifications: Distance between centers: 1000 mm Center height: 210 mm Swing over bed: 420 mm Swing with bridge removed: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle nose: DIN 55029, D1-6 Spindle speed min.: 30 rpm Spindle speed max.: 3000 rpm Spindle speed change - number of speeds / stepless: stepless (30–550 / 550–3000) Longitudinal feed range: (17) 0.05–1.7 mm/rev Cross feed range: (17) 0.025–0.85 mm/rev Metric threads: (42) 0.2–14 mm Inch threads: (45) 2–72 TPI Tailstock quill diameter: 50 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 4 Motor power: 5.5 kW Voltage: 400 V Overall dimensions (W x D x H): 2090 x 1050 x 1600 mm Weight approx.: 1145 kg Scope of Delivery: Djdpfxoyr I Sqe Agqswd - 3-jaw chuck DK11-200 mm / D6 - 350 mm faceplate - Fixed steady rest – capacity max 135 mm - Travelling steady – capacity max 65 mm - Coolant system - Four-way tool post - Micrometric longitudinal stop - Thread dial indicator - Magnetic brake according to CE standard - Electromechanical spindle brake - Filled with Shell Tellus 46 oil - Halogen work light - Change gears - 2 live centers - Chip tray - Service tools - 3-axis digital readout - Stepless spindle speed control - Mandatory safety guards - Full technical documentation (DTR) in Polish - CE Certificate - 24-month full warranty without extra charges

Kondisi: siap digunakan (bekas), Turn length 450 mm Swing diameter over bed 245 mm Swing diameter over cross slide 135 mm Spindle bore 23.0 mm Mount DIN 55021-4 Tailstock quill: 2 MT Quill travel 80.0 mm Spindle speed 60 - 3000 rpm Bed width 155 mm Total power requirement 1.2 / 1.5 kW Voltage 380 V Machine weight approx. 340 kg Dimensions L x W x H 1200 x 650 x 1330 mm From a vocational school (!) Especially suitable for precision turned parts The Primus series is the most compact precision centre lathe (engine lathe) from WEILER. It is considered a suitable machine for precise work in confined spaces in toolmaking, laboratories, and training workshops. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum vibration damping and durability. Equipment: Dedpfx Aezbc Daogqswd - Robust centre lathe with leadscrew and feedshaft - 2-axis digital readout "D60-2V" - 3-jaw chuck - Swiveling chuck guard - Chuck key - MULTIFIX toolpost with 3 holders - Sliding tailstock - Control panel, front left - Infinitely variable feeds for longitudinal and cross slide - Pole-changing drive motor - Machine base - Rear chip and splash guard - Additional accessories such as collet chuck + collets, etc. - Emergency stop button on the front

Kondisi: bekas, Tahun pembuatan: 1996, Swing diameter 400 mm Turning length 915 mm Dwodpfxot Hw Szj Agqsd Control NUM Type 1062 T Total power requirement 12.5 kW Machine weight approx. 5,500 kg Space requirement approx. m SOMAB (France) Cycle-controlled universal lathe(s) Model UNIMAB 400 Year of manufacture 1996 #52 468 and 52 469 Year of manufacture 1998 #52 501 and 52 502 _____ Centre height approx. 200 mm Max. swing diameter over bed 400 mm Max. swing diameter over cross slide 220 mm Cross slide / top slide travel 235 mm Max. turning length with chuck / Longitudinal travel of the carriage 890/915 mm Spindle bore 52 mm Spindle speeds, infinitely variable 60 – 3,000 rpm Longitudinal and facing feeds / rapid traverse, stepless up to max. 15 m/min Max. feed force facing/longitudinal 900 daN Max. workpiece weight between centers/with tailstock 250 kg Thread pitch 0.1 – 400 mm/pitch Spindle drive 9/12.5 kW Total drive approx. 22 kW – 400 V – 50 Hz Weight approx. 5,500 kg Accessories / Special equipment • NUM 2-axis cycle control Type 1062 T / SOMAB PL +S3 with direct entry of all turning parameters via interactive user interfaces and corresponding software; control and monitor integrated into the sliding door, with free-form contour input software and tool change stop input. • MULTIFIX tool holder head Type BD installed on the cross slide with 4 various Multifix tool holders. • Manual axis control via handwheels and joystick possible • Manual 3-jaw chuck FORKHARDT F 250 installed (52 468 and 52 469) or ROTO-S plus 250-62 (52 501 and 52 502) • Manual tailstock (MT 4) with quill, central lubrication, extendable coolant system, 2 sliding doors, miscellaneous, etc. Condition: Very good – ready for demonstration under power, compact and stable machine. Ideal for training, toolmaking and mechanical engineering! Delivery: Ex stock – as inspected Payment: Net cash on collection – after receiving invoice.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Conventional lathe, center height 254 mm, center distance 1000 mm, spindle bore Ø 80 mm, 12 spindle speeds 30 - 2200 rpm, motor 5.5 kW, Camlock 6'', dimensions 230x115x165 cm, weight approx. 1750 kg; Equipment: 2-axis digital readout, coolant system, 3-jaw chuck Ø 250 mm, revolving center, MULTIFIX C quick-change toolpost with various holders, fixed and travelling steady rests, Dwjdpfx Aotv Iy Esgqod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 9.000 h, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: HURCO, model controller: WinMax / MAX5, lebar meja: 508 mm, panjang meja: 760 mm, beban meja: 1.500 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 9.000 W, jumlah slot dalam magazin alat: 30, jumlah sumbu: 3, Mesin 3-sumbu tipe Hurco VMX 24i ini diproduksi pada tahun 2015. Mesin ini memiliki panjang gerak 610 mm pada sumbu X, 508 mm pada sumbu Y, dan 610 mm pada sumbu Z. Dilengkapi dengan meja yang kokoh berukuran 760 x 508 mm dengan kapasitas beban maksimum hingga 1.500 kg. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Hurco VMX 24i yang kami tawarkan. Silakan hubungi kami untuk informasi lebih lanjut. - Holder alat: SK40 / CAT40 - Torsi maksimum: 95 Nm - Diameter alat maksimum: 80 mm - Panjang alat maksimum: 300 mm - Berat alat maksimum: 7 kg - Kecepatan rapid traverse X/Y: 38 m/menit Dwedpfx Agozc Rzijqod - Kecepatan rapid traverse Z: 32 m/menit - Fitur tambahan: pelumasan sentral otomatis, sistem pembilas serpihan, konveyor pembersih, unit pendingin, handwheel elektronik, koneksi jaringan - Termasuk dalam paket: Mesin CNC Milling Hurco VMX 24i - Tidak termasuk: Perlengkapan penjepit, alat pemotong, perlengkapan tambahan, dan aksesoris lainnya

Kondisi: bekas, Tahun pembuatan: 1996, Rincian Teknis: Diameter putar: 500 mm Panjang putar: 1500 mm Diameter putar di atas carriage: 290 mm Lubang spindle: 71 mm Rentang kecepatan putar: 3 - 2800 rpm Kecepatan rapid traverse: 10 / 5 m/menit Dodpfxswwlvle Agqjwd Kecepatan feeding: 1 - 2000 mm/menit Kebutuhan daya total: 22 kW Berat mesin sekitar: 3,2 ton Kebutuhan ruang sekitar: 3,0 x 1,6 x 2 m dengan kontrol siklus dari R&D MTC-K Holder alat PARAT Perlengkapan pendingin

Kondisi: bekas, Swing diameter over bed: 410 mm Swing diameter over support: 260 mm Turning length: 1000 mm Spindle speed: 40 – 2000 rpm Centre height: 205 mm Spindle bore: 50 mm Total power requirement: 4.5 kW Machine weight approx.: 1.6 t Space requirement approx.: 2.4 x 1.3 x 1.5 m Lead and feed screw lathe - with copying device - 3-jaw chuck 200 mm - 2 pcs. Multifix quick-change tool holders - Live centre - Machine lamp Dedpfx Aowz Ruzogqewd - Chip tray

Kondisi: bekas, Tahun pembuatan: 2004, Turning length: 750 mm Swing diameter: 310 mm Swing diameter over support: 175 mm Spindle bore: 32.0 mm Tailstock quill taper: MT 3 Spindle speed: 85 - 2200 rpm Bed width: 200 mm Total power requirement: 2.2 kW Dsdexaa D Topfx Agqewd Machine weight approx.: 710 kg Dimensions (L x W x H): 1884 x 717 x 1262 mm New price ~ €23,000 From a training workshop (!!) Equipment: - Infinitely variable spindle speed adjustment in 2 gear stages - 'TOS' 3-jaw chuck, Ø 160 mm, with spare jaws & chuck key - 'NEWALL' digital readout, front left - MULTIFIX quick-change tool post with inserts - Travelling tailstock - Live center, including quick-action drill chuck - Digital speed display - Change gears - Foot/spindle brake * All technical data: - Swing over bed: 310 mm - Distance between centers: 750 mm - Spindle bore: 32 mm - Swing over cross slide: 175 mm - Bed width: 200 mm - Spindle nose / DIN55027 No. 5 - Spindle taper: 4.5 M - Infinitely variable spindle speeds in 2 ranges - Spindle speed range: 85–405; 470–2200 rpm - Number of feeds: 48 - Metric thread range: 0.1–28 mm - Module thread range: 0.1–1.75 - DP thread range: 4–70 - Cross slide travel: 150 mm - Top slide travel: 95 mm - Tailstock quill diameter: 40 mm - Tailstock taper: MT 3 - Tailstock quill travel: 100 mm - Motor power: 2.2 kW - Weight: 710 kg