Beli Mesin bubut otomatis tipe panjang bekas (233)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, jarak gerak sumbu Z: 140 mm, kecepatan spindle sekunder (maksimal): 8.000 rpm, jumlah sumbu: 5, Perlengkapan: pengumpan batang, RINCIAN TEKNIS Jumlah sumbu: 5 Jumlah spindel: 2 Hedoycp Nljpfx Ahvjh Spindel utama Diameter batang maks.: 16 mm Perjalanan sumbu Z: 140 mm Kecepatan spindel: 8.000 rpm Daya penggerak spindel: 2,2 kW Jumlah posisi alat: 13 Spindel sekunder Diameter batang maks.: 12 mm Kecepatan spindel: 8.000 rpm Jumlah posisi alat: 4 DETAIL MESIN Kontrol: FANUC 18i-T Jam operasi: 32.000 jam PERLENGKAPAN Majalah loader batang FMB Minimag Catatan: Pembongkaran dan pemuatan dapat dilakukan oleh penjual dengan biaya €1.500.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, jam operasional: 47.000 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 8.000 rpm, jarak gerak sumbu Z: 140 mm, kecepatan spindle sekunder (maksimal): 8.000 rpm, jumlah sumbu: 5, Perlengkapan: pengumpan batang, RINCIAN TEKNIS Jumlah sumbu: 5 Hjdpfxsycp Ihs Ahveh Jumlah spindel: 2 SPINDEL UTAMA Diameter batang maks.: 12 mm Perjalanan sumbu Z: 140 mm Kecepatan putar spindel: 8.000 rpm Daya penggerak spindel: 2,2 kW Jumlah posisi alat: 13 SPINDEL KONTRA Diameter batang maks.: 10 mm Kecepatan putar spindel: 8.000 rpm Jumlah posisi alat: 4 RINCIAN MESIN Jam operasional: 47.000 PERLENGKAPAN FMB Minimag magazine pengumpan batang Catatan: Pembongkaran dan pemuatan dapat diambil alih oleh penjual dengan biaya €1.500.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0179 (033), panjang pembubutan: 125 mm, kecepatan spindel (maks.): 7.000 rpm, diameter pembubutan: 32 mm, diameter penjepit: 32 mm, panjang benda kerja (maks.): 150 mm, Mesin diserahkan bersama dudukan alat dan suku cadang DETAIL TEKNIS Diameter putar di atas alas: 32 mm Bore spindle: 32 mm Panjang putaran: 125 mm Kontrol: YASKAWA SIEMENS 840 DI V2 Kecepatan spindle: 7.000 rpm Panjang benda kerja: maks. 150 mm Diameter penjepitan: 32 mm Laju umpan: 0 - 2.000 mm/menit Hodpex U Tchefx Ahveh DETAIL MESIN Berat mesin: sekitar 5,7 ton Dimensi ruang yang dibutuhkan: sekitar 10,5 x 2 x 1,9 m Tegangan koneksi: 200 V, 3 fasa Frekuensi: 50 / 60 Hz Daya terpasang: 8,0 kVA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Pusat Mesin Universal 5 sumbu simultan DMG DMC 105V Linear Tahun 2007 Perjalanan: X 1050 Y 800 Z 560 mm Meja Putar NC Ø1.000 mm Kontrol Heidenhain iTNC530 Spindel 18.000 rpm ATC 30 HSK-63A Kepala Milling Kontrol Sumbu B NC – 120° / +30° Hsdpfx Ahewvra Ieveh Jendela pembersih roto Sistem pengukur alat – Blum Probe pengukur Pendinginan oleh hembusan udara melalui spindel dengan kode M Pendinginan melalui spindel Konveyor chip ____5 axis 1m termurah____

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 46.476 h, kecepatan spindel (maks.): 8.000 rpm, produsen pengendali: MITSUBISHI, model controller: Meldas 635, jumlah sumbu: 12, This 12-axis Citizen M32V was manufactured in 2010 and offers a maximum machining diameter of 32 mm and a turning length of 320 mm on both main and sub spindle. It comes equipped with a bar feeder, LNS chip conveyor, high-pressure pump, and various accessories. If you are looking for high-quality turning capabilities, you should consider the Citizen M32V machine we have for sale. Contact us for more information about this machine. • Axis Travels: • X1: 108 mm • Z1: 325 mm • Y1: 275 mm • X2: 120.5 mm • Z2: 202 mm • Y2: 45 mm • X3: 235 mm • Z3: 410 mm • Main Spindle: • Max. machining diameter: 32 mm • Max. turning length: 320 mm • Through-hole diameter: 36 mm • Sub Spindle: Hedsyf Niwepfx Ahvoh • Max. machining diameter: 32 mm • Spindle speed: 7,000 rpm • Driven Tools: • Speed: 5,000 rpm • Number on vertical tool holder: 4 • Stations on vertical tool holder: 10 Additional Equipment: • Bar feeder • LNS chip conveyor • High-pressure pump • Various holders and collet chucks (extensive accessories)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, berat keseluruhan: 2.220 kg, tinggi total: 1.835 mm, produsen pengendali: MITSUBISHI, model controller: Meldas 700, This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016 and is designed for high-precision Swiss-type turning, equipped with an FMB bar feeder and LNS chip conveyor. The machine features a main spindle with speeds up to 10,000 rpm and a sub-spindle capable of running at 8,000 rpm. It accommodates up to 37 tools, enhancing its capacity for complex machining operations. The unit is fitted with a Mitsubishi Meldas 700 control for efficient operation. Seize the opportunity to acquire this Citizen Cincom L20E-2M8 Swiss-type lathe. Contact us for further details. CITIZEN Cincom L20E-2M8 with FMB bar feeder and LNS chip conveyor The machine is designed for efficient turning up to a diameter of 20 mm and can be equipped with up to 37 tools for machining intricate components. Tool assemblies set: - Vertical holder with 5 tools - 4–7 driven tools for radial cross machining - 3–9 drilling tools for frontal operations - 0–4 driven tools for the sub-spindle - 4–10 drilling tools for the sub-spindle Base configuration: - Machine bed: block-cast, robust linear guides for thermal and vibration stability - Main spindle: 10,000 rpm, C-axis, through-bore Ø 26 mm (max. bar diameter 20 mm) - W1: Vertical holder with 5 tools (12 × 12 × 130 mm) - 3 × GSC1310 radial driven tools ER16 (1 kW, 7,500 rpm) - GSE3210 swiveling attachment adjustable 0°/90° for milling (3× GSC1310 ER16) - U124B deep drilling block (2+1) for deep-hole drilling - Sub-spindle: 8,000 rpm, optional C-axis, 0.75/1.5 kW - U153B driven tool unit for sub-spindle (0.75 kW) + 4× SAU819 adapters Ø19.05 - Control: Mitsubishi Meldas 700 (Windows OS, upgraded processor, 8.4" LCD) - Simultaneous machining on main and sub-spindles - New sliding door cover design for space-saving installation Hodpjx D Iltofx Ahveh Technical specifications Main spindle - Max. turning length: 200 mm - Through bore diameter: 26 mm - Max. bar diameter: 20 mm - Spindle speed: 200–10,000 rpm - Motor power: 2.2 / 3.7 kW - C-axis positioning: 0.001° Sub-spindle - Max. bar diameter: 20 mm - Spindle speed: 200–8,000 rpm - Motor power: 0.75 / 1.5 kW - C-axis positioning - Max. part length in collet: 80 mm Driven tools - Speed: 200–7,500 rpm - Power: 1 kW - 5 tools (vertical holder) + 4–7 radial + 3 in Z-direction Tooling - 5 tools (12 × 12 × 130 mm) - 3-position drill block on sub-spindle (3 × Ø25.4 mm) - Rear machining holders: 3–6 (Ø19.06 mm) Guides - Collets: E145 - Guide bush: Neukomm 22.001 - Machine ER16 / ER11 Additional equipment • Clamping unit Ø25 mm • 15 bar pump for sub-spindle flushing • SAU819 adapter up to Ø8 mm • Transformer 3×400V/3×200V, 10 kW • LNS MH-HB chip conveyor • FMB Minimag 20/3200 bar feeder Dimensions Machine depth: 2300 mm

Kondisi: baik (bekas), Tahun pembuatan: 1986, CNC automatic lathe Manufacturer: STAR Type: JNC-16 Year: 1986 Hjdpjvbb U Hofx Ahvjh Equipped with Fanuc OT control system. Maximum bar capacity: 16 mm. For additional technical details, please refer to the data sheets. Machine documentation available.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar feeder, an integrated hydraulic power unit, and supports both front and rear with a center height of 1100 mm. It features a movable spindle headstock, a directional spindle stop, and a cross slide with tool holders. This machine is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information on this machine. Additional Information • Maximum bar length: 3040 mm Hjdjx D D Ikjpfx Ahvoh • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable spindle headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Drum-type bar feeder "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Can be equipped with Robobar SSF 3 m bar feeder

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 12.000 rpm, This Swiss lathe TORNOS DECO 2000 was manufactured in the year 2000. It features a sliding headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent sub spindle, a lubrication device, and a drum-type bar loader. It is fitted with a "HYBRID 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Please contact us for more information about this machine. Additional Information • Electrical control cabinet • Motor voltage: 400 V • Control voltage: 24 V • Sliding headstock Hjdpex D Dmyofx Ahveh • Cross slide with 4 tool stations T11-T24 with both vertical and horizontal movement • Swiveling workpiece holder at the sub spindle • Direction-dependent spindle stop S1 • 3 presettable turning tool holders • 4 fixed tool holders • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, handling bars up to 8 mm without prior preparation • Independent sub spindle • Thread cutting device for collet ESX 12 • Lubrication device for the guide bushing with filter • Drum-type bar loader • Integrated 25-liter hydraulic power unit with filter • Front and rear support foot, center height 1100 mm Optional: Comprehensive package of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It comes equipped with an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine features a Robobar SSF 3m loading magazine and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning applications. Contact us for further details about this machine. Additional information: • Maximum bar length: 3200 mm • Bar capacity: minimum 2 mm, maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control Hjdpfsx D Dliox Ahvjh • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil bath bar loader • Robobar SSF 3m loading magazine • Front and rear support stands • "HYBRID 10+5" drum with 14 guiding holes for 1-4 mm and 14 guiding holes for bars 4.1-10 mm, no bar preparation needed up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Programmable spindle stop. Optional: Comprehensive set of measuring instruments.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, en Hedpfxex D Dm Ts Ahvsh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This TORNOS DECO 10e was manufactured in 2007. It is a Swiss sliding headstock lathe featuring direction-dependent spindle stop and multiple tool holders for versatile operations. Includes an independent sub-spindle, lubrication system, and drum-type bar feeder. Ideal for precision turning operations with a bar capacity of 10 mm. Take the opportunity to acquire this Swiss lathe TORNOS DECO 10e. Contact us for further information. Additional Information: • Sliding headstock • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, vertically and horizontally adjustable • Independent sub-spindle • Pivoting workpiece holder on the sub-spindle • Lubrication system for guide bushing with filter • 3 presettable turning tool holders • Motorization S2 • Collet threading device ESX 12 Hsdpsx D Dmmsfx Ahveh • 4 fixed tool holders • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front and rear support foot, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allows processing of bars up to 8 mm diameter without preparation • Electrical switch cabinet • Motor voltage 400 V • Control voltage 24 V • Max. turning diameter 10 mm Optional: Comprehensive set of measuring devices.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This Tornos DECO 10e was manufactured in 2010. It is a Swiss-made lathe featuring a sliding headstock, direction-dependent spindle stop, and an independent sub-spindle. The machine comes equipped with a drum-type bar loader and an integrated 25-liter hydraulic unit. This model is ideal for precision turning in small batches, supporting bar diameters from 1 to 10 mm, and up to 8 mm without prior preparation. Contact us for further information about this machine. Additional information: • Electrical control cabinet • Cross slide with 4 tool holders T11-T24, with vertical and horizontal movement Hjdpsx D Dndefx Ahvjh • 3 presettable turning tool holders • 4 fixed tool holders • Thread cutting device for collet ESX 12 • Sliding headstock • Independent sub-spindle • Pivoting workpiece holder on the sub-spindle • Lubrication device for the guide bush with filter • Drum-type bar loader • Integrated 25-liter hydraulic aggregate with filter • Front and rear support feet, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, up to 8 mm without bar preparation • Motor voltage: 400 V • Control voltage: 24 V • Drive motor speed: 12,000 rpm Optional: Comprehensive package of measuring devices

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a movable spindle headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent sub-spindle, a swiveling workpiece holder, and a lubrication device. Additionally, it includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, you should consider the TORNOS DECO 10a we have available for sale. Please contact us for more information. Additional Information Hjdpfjx D Dmtex Ahvoh • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Movable spindle headstock • Direction-dependent spindle stop S1 • Independent sub-spindle • Swiveling workpiece holder at the sub-spindle • Lubrication device for guide bushing with filter • Thread cutting device for ESX 12 collet chuck • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 42.000 h, nomor mesin/kendaraan: IntNr231370, STAR SA 12 CNC sliding head lathe, built in 2003 FANUC 18i-T CNC control Operating hours: 42,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm Hedpfx Ahsydnm Ssvoh - Number of tool positions: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to technical changes, errors, and prior sale!

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 44.000 h, nomor mesin/kendaraan: IntNr231371, STAR SA 12 CNC sliding head lathe, built in 2003 FANUC 18i-T CNC control Hjdpfx Aeydnm Eehveh Operating hours: 44,000 Technical data - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool positions: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool positions: 4 FMB Minimag bar loading magazine High pressure unit 40 bar The machine can be viewed under power by appointment. Technical data and information subject to change and prior sale. Errors excepted!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, kecepatan spindel (maks.): 8.000 rpm, berat keseluruhan: 3.500 kg, tinggi total: 1.600 mm, jarak pergerakan sumbu X: 310 mm, produsen pengendali: FANUC, model controller: Series 18i-T, panjang produk (maks.): 2.600 mm, jumlah sumbu: 3, en Hjdpfsydlpqsx Ahvjh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Hanya 8.300 jam spindle! Kontrol: TX 8 i-p SPINDEL UTAMA Maks. diameter batang: 32 mm Maks. panjang benda kerja - Operasi bubut panjang: 245 mm - Operasi bubut pendek: 125 mm Maks. kecepatan putar spindle: 6.400 rpm Sumbu C SPINDEL LAWAN Maks. diameter batang: 32 mm Maks. kedalaman penjepitan benda kerja: 250 mm Maks. kecepatan putar spindle: 6.000 rpm Sumbu C REVOLVER ALAT ATAS Jumlah stasiun: 10 Semua digerakkan Maks. kecepatan putar: 12.000 rpm Hodpoxrf Etsfx Ahveh REVOLVER ALAT ATAS Jumlah stasiun: 9 Semua digerakkan Maks. kecepatan putar: 12.000 rpm UNIT BELAKANG Jumlah stasiun: 8 3 di antaranya digerakkan (T12, 13, dan 14) Kecepatan putar T12 & T14: 12.000 rpm Kecepatan putar T13: 4.000 rpm Sabuk konveyor bagian Konveyor serpihan Pompa coolant 20 bar Filter kabut oli IFS Loader batang FMB turbo 3-36

Kondisi: bekas, Tahun pembuatan: 1995, nomor mesin/kendaraan: 253057, Bitte teilen Sie uns Ihr Angebot mit. Hjdpjycu Imjfx Ahvjh Der Preis versteht sich ohne Verpackung und Transport; Zahlung im Voraus. Wenn Sie an der Maschine interessiert sind, unterbreiten Sie uns bitte ein Preisangebot. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien. Der Käufer kann bei der Demontage der Maschine behilflich sein. Der Käufer ist für den Transport der Maschine verantwortlich. Wir organisieren lediglich das Verladen der Maschine auf den Anhänger/LKW mittels Gabelstapler oder Kran.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3550 kg Maximum machining diameter: 32 mm Maximum machining length: 320 mm with 1 clamping chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis of spindle: 0.001° Counter spindle speed: 200–8,000 rpm Maximum clamping diameter counter spindle: 32 mm Maximum front drilling diameter: 12 mm Maximum front tapping diameter: M10 Maximum rear tapping diameter: M10 Spindle through-hole diameter: 37 mm Hodpfx Ajydaadohveh Number of mountable tools: up to 25 depending on configuration Rapid traverse for X, Y, Z axes: up to 32 m/min Bar stock length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory capacity: 5120 m / 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool compensation: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or up-to-dateness of the above information.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Kontrol Fanuc, spindle penangkap, alat berpenggerak, majalah pemuatan, konveyor serpihan, tersedia segera Hodpfx Asyc Nnbshvoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, CNC long turning automatic lathe Brand: STAR Model: SV-38R Year of manufacture: 2014 including: FANUC 31i - B control, Hodpfx Ahovgulvevjh synchronizing spindle, back-working unit, live tools, turret with B, Y, X and Z axes, 2x C-axis, Y2-axis, high-pressure pump, oil mist extractor, parts conveyor, chip conveyor, fire extinguishing system, can be used as short- or long-turning lathe bar feeder FMB Turbo 5-55

Kondisi: baik (bekas), Tahun pembuatan: 2007, cnc_langdrehautomat-2007-sr32j-star-fanuc18i Hedpfx Asycq Ddshvsh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 6.500 rpm, jumlah sumbu: 9, This 9-axis Hanwha XDI32-N was manufactured in 2021 and features a dual-spindle system with a maximum rotational speed of 6,500 rpm and a power output of 2.2/5.5 kW per spindle. It supports a maximum workpiece diameter of 32 mm and is equipped with a 315-liter coolant tank. This machine is ideal for Swiss-type precision turning, ensuring efficient and reliable performance. If you are looking for high-quality lathes, the Hanwha XDI32-N machine we offer for sale is worth considering. Contact us for more information. • Power supply: 3-phase 200/220 VAC • Current: 60 A • Frequency: 50/60 Hz • Rated short-circuit current: 20 kA Hsdex D Rn Depfx Ahvoh • Compressed air pressure: 4-6 kg/cm² (3.9-5.9 bar) • Pallet height: 1120 mm • Main spindle max. machining diameter: 32 mm • Secondary spindle motor type: integrated • Max. machining diameter of secondary spindle: 32 mm • Bore diameter of secondary spindle: 32 mm • Coolant tank capacity: 315 liters • Coolant pump power: 1.1 kW • Lubricant tank capacity: 1.8 liters • Lubricant pump power: 5 W • Lubricant consumption: 8 cc / 30 min • Pneumatic air consumption: 20-30 liters/min • X1-axis travel (external diameter): 64 mm • Y1-axis travel (external diameter): 383 mm • X2-axis travel (external diameter): 100 mm • Y2-axis travel (external diameter): 383 mm • X3-axis travel (external diameter): 404 mm • Y3-axis travel (external diameter): 283 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 6.000 h, Fungsionalitas: berfungsi sepenuhnya, TRAUB TNL 18 – CNC Swiss-Type Automatic Lathe Ex Works High Med-Tech, Reject Rate 0.3% Machine Type: TNL 18 Machine Number: 6050338 Year of Manufacture: 2013 Condition: Used, very well maintained, in productive operation Included: High-pressure coolant system + bar feeder Spindles & Machining Main spindle: Motor spindle Max. bar capacity main spindle: 18 mm (optional 20 mm) Max. speed main spindle: 12,000 rpm Max. torque: up to 10.5 Nm C-axis resolution: 0.001° Counter-spindle: yes Max. bar capacity counter-spindle: 18 mm Max. speed counter-spindle: 12,000 rpm C-axis counter-spindle: yes Tool System Upper turret: Hedpfx Ajycl Udehvjh 8 stations Axes: X / Y / Z / B / H Lower turret: 7 stations Axes: X / Y / Z / H Back-working attachment: 7 stations Max. tools in-cut simultaneously: 3 tools Tool capacity: Standard: 22 Max. (with tool holders): up to 52 tools Axes & Dynamics Number of CNC linear axes: 7 Rapid traverse: up to 40 m/min (Z) Long axis travel for both sliding and fixed headstock operation Simultaneous machining with main & counter spindle: yes Coolant & High Pressure Coolant tank: approx. 500 l Standard pressure: 3 / 8 bar High pressure (option, included): up to 20 bar Delivery rate: approx. 28 l/min Filtration: 50 µm Electrical Data Rated voltage: 400 V / 3~ / N / PE Rated current: 56 A Max. upstream fuse: 63 A Rated power: 35 kW Connected load: 24 kVA Frequency: 50 Hz Control voltage: 24 V DC Dimensions & Weight Machine dimensions (L × W × H): approx. 3060 × 1480 × 2420 mm Weight: approx. 4,300 kg Summary (Advert Short Text) TRAUB TNL 18, Year 2013 CNC Swiss-type & short turning lathe Main and counter spindle 2 turrets + backworking attachment High-pressure coolant system included Bar feeder included Very robust production machine Reject rate only 0.4% Ideal for precision and series production I am selling the following machines: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Cleaning / Ultrasonic cleaning – 2015 Mollart Drillsprint – Gun drilling machine – 1996 Traub TNL 26 – Swiss-type lathe – 2004 Traub TNL 26 – Swiss-type lathe – 2007 Traub TNL 26 – Swiss-type lathe – 2009 Traub TNL 18 – Swiss-type lathe – 2013 Traub TNL 18 – Swiss-type lathe – 2014 Star SV-20R – Swiss-type lathe – 2019 Traub TNL18-9P – Swiss-type lathe – 2015 Traub TNL18 – Swiss-type lathe – 2014 Traub TNL18-9 – Swiss-type lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Turntable blasting system Rösler RWT 1000-I – Blasting / blast cabinet – 2012 Bending machine C 202 M – Bending machine – 1990 Schmidt Hydro-Pneumatic Press – Press / Hydro-pneumatic press – 2021