Mesin pemotong laser

Beschriftungslaser

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: SRS CW 2000 2026, jenis kontrol: manual, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen sumber laser: Raycus / JPT, daya laser: 2.000 W, panjang gelombang laser: 1.080 nm, daya: 15 kW (20,39 hp), tegangan masuk: 380 V, jenis arus masuk: AC (pendingin udara), jenis pendinginan: air, sambungan udara terkompresi: 5 batang, berat keseluruhan: 175 kg, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, penghadang cahaya keselamatan, unit pendingin, Kami menawarkan perangkat untuk membersihkan dan mengolah permukaan logam/batu/beton. Pengiriman ke Jerman/Austria. Sebagai penyedia layanan di bidang pengolahan permukaan, kami dapat menawarkan mesin yang sesuai dengan kebutuhan Anda! Biaya transportasi: tergantung pada lokasi Anda atau ketentuan pengiriman Anda. Pengiriman: 4 minggu hari kerja setelah pembayaran diterima melalui pengiriman udara. - Pengiriman udara sekitar 2 minggu. Perangkat ini BARU dan akan dikonfigurasi dan disesuaikan sesuai dengan kebutuhan pelanggan! Konfigurasi dan harga tergantung pada kebutuhan dan bidang aplikasi pelanggan. Kami menawarkan pelatihan teknis tentang cara menggunakan perangkat sesuai dengan UAVA/UVV di Austria dan Jerman. Karena kami adalah penyedia layanan dan menggunakan perangkat ini, kami juga dapat menjamin bahwa perangkat ini berfungsi. Kami menawarkan pelatihan ekstensif di lokasi atau di bengkel kami, atau demonstrasi yang berorientasi pada pelanggan. Pembayaran: LEASING / PEMBIAYAAN / PEMBELIAN Parameter teknis: Model: RST-FLC-2000W 2026 Laser: Laser serat Daya laser 1000W / 2000W / 3000W (atau Laser: Pulsa 100W hingga 1000W) Panjang laser 1064nm atau 1080nm ± 5 Frekuensi 10-50KHz Pendinginan udara atau air Berat bersih sekitar 170kg Ukuran 98 * 122 * 143 cm Lhjdpfx Aotxlyroc Hjk Lebar pemindaian 5-50 cm Fungsi: Manual atau otomatis Suhu kerja 0-40°C Mode operasi CW Panjang gelombang Nm 1025-1070 Daya keluaran standar 15KW Kualitas berkas laser mm*mrad 4 Frekuensi yang dapat disesuaikan Hz 400 hingga 50000 Diameter serat transmisi 50/100 Stabilitas daya keluaran ± 2 Catu daya 250V / 16A Suhu operasi °C 5~35 DIJAMIN dengan HARGA TERBAIK!!! - SEWA / LEASING / BELI Semua perangkat dirakit dan dikirim secara eksklusif sesuai dengan kebutuhan Anda dan pengalaman kami. - Demonstrasi - Dukungan 24 jam - Termasuk pemeliharaan & servis & perbaikan Selain perangkat, kami menawarkan: Pelatihan INDIVIDUAL sesuai dengan peraturan keselamatan UAVA / UVA untuk pengoperasian mesin laser untuk pengolahan permukaan. Konsultasi pendamping keselamatan sesuai dengan peraturan kerja / keselamatan untuk penggunaan perangkat laser. Pemeriksaan berkala terhadap peraturan keselamatan sesuai dengan peraturan yang berlaku.

Kondisi: bekas, Tahun pembuatan: 1992, kecepatan spindel (min.): 7.500 rpm, kecepatan spindel (maks.): 24.000 rpm, 4 motor-driven grinding spindles (liquid-cooled, sealing air / oil mist lubrication) including the REFU HF converter, suitable for example for supplying the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032, 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Ljdel Tn Afjpfx Ac Hehk 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter / inverter for supplying the motor spindles GMN tool spindle motor grinding spindle The spindles are fully functional, sold without warranty – year of manufacture approx. 1992 A collection of various grinding spindle shafts / arbor mandrels for grinding wheels is available for these grinding spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries within the European Community.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Citizen M32-2M3 CNC Mesin Bubut Panjang Tahun Pembuatan: 2002 Kontrol: Mitsubishi Meldas 635 Diameter Maks. Pemesinan: 32mm 7 Sumbu Servo yang Dapat Dikontrol: X1/Z1/Y1/X2/Z2/X3/Z3 4 Alat Penggerak pada Dudukan Vertikal Lsdpfx Asx Dncfec Hshk Poros-C: Spindle utama dan spindle sub Termasuk aksesoris: FMB Turbo 5-42 Feeding Magazine Sistem Ekstraksi Konveyor Bagian 5 Alat Penggerak untuk Revolver 5 Dudukan Standar (Dudukan Bubut/Bor) untuk Revolver - Tersedia Segera -

Kondisi: baru, Tahun pembuatan: 2024, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the tiered trolley: Manufacturer: LPR Type: 600 01x tiered trolley, new Material colour: blue / orange Total height incl. castors: 2,150 mm Total width: 1,550 mm Total depth: 600 mm Number of levels: 03 pcs. Including: 02x rack uprights, new Material colour: blue Frame profile dimensions: 50 x 50 mm Incl. cross and diagonal bracing, Metal base plates, plastic End caps Uprights are pre-assembled (bolted framework) 2,000 mm high 600 mm deep 06x workbench beams, new Material colour: orange Version: stepped beam Clear span: 1,450 mm Profile dimensions: 80 x 50 mm Shelf load 300 kg with evenly distributed load 12x safety pins, new To secure the longitudinal beams against unintentional removal 03x shelf panels, second choice, used Thickness: 22 mm Dimensions: 1,430 x 545 mm 02x double-braked swivel castors, new 02x swivel castors, new 08x machine screws: M8 x 20 mm 08x nuts: M8 08x washers Images serve for illustrative purposes only. Material colour may vary. - The workbenches are supplied unassembled; - The workbench uprights are pre-assembled; - Production time is typically approx. 3 - 5 working days. Our services at a glance: (Prices on request) - Assembly, installation Please observe our general assembly conditions - Rack inspection Rack inspections according to DIN EN 15635 carried out per BGR 234 visual inspection requirements for all racking systems Lhsdpfxodb N Hms Ac Hok - Delivery with our own fleet (offloading not included)

Kondisi: bekas, Tahun pembuatan: 1966, Max. pulling force 5 t, max. lift 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3–90 mm, bore diameter 13–500 mm, workpiece weight 6,000 kg, machine base depth below floor level 1,400 mm. Lhsdpfx Acocm Elne Hek

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, berat keseluruhan: 45 kg, jenis penyesuaian ketinggian: listrik, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, The LAS 22 is a compact benchtop device with a small working area, ideally suited for small parts. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The LAS 22 universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With its integrated fiber laser, you can mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with either a 20 or 30-watt fiber laser. For permanent marking, the use of the laser is essential in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and part numbers once set up. Additionally, it can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. A hand scanner can also be used. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20-watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (simple preview, contour preview) - Focus finder (easy focusing) - Max. part height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electrically operated door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air cooled - Laptop with Windows operating system (German or English) Lhodpfx Acjuy H Nqo Hok - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: PM_1000, Used polishing machine for manual processing. Lsdpfx Aofiuguec Hshk Drive power: 5.5 kW Polishing discs diameter: 1000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, schliesskraft-und-parameter-1 Lodovl Skgjpfx Ac Hshk

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GE-50RAY, tegangan masuk: 230 V, jenis arus masuk: Arus searah (DC), daya laser: 50 W, jenis pendinginan: udara, lebar total: 530 mm, tinggi total: 770 mm, panjang total: 796 mm, berat keseluruhan: 254 kg, masa garansi: 36 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 530 mm, tinggi bukaan pintu: 300 mm, panjang meja: 203 mm, lebar meja: 430 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 100 Hz, Perlengkapan: kabin, Take advantage of this opportunity and secure your 50-watt, 100-watt, or 200-watt fiber laser! For further information or a tailored offer, we are happy to assist you. Contact us today to learn more about the benefits of these outstanding products. We offer brand-new fiber lasers with German user software and operating instructions. These units are extremely easy to operate and ready to use immediately, with no programming knowledge required. Our Services: - Personal delivery and installation - On-site or remote commissioning and user training - Ongoing support for questions or issues - Service and spare parts supplied directly from Germany Technical Specifications (depending on the model): - Laser power: 50 watts, 100 watts, or 200 watts - Wavelength: 1064 nm - Frequency range: 20–100 Hz - Marking field size: 150x150 mm (options: 50, 70, 110 mm scan head) - Repeatability: ± 0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German/English - Pilot laser: Easy preview - Laser Class: 1 - Operating temperature range: 14–30°C - Focusing: Electric column with motor control - Max. workpiece height: approx. 300 mm - Connection: 230 V Lhodpfx Acsu Tkclo Hok - Cooling: Air-cooled - Weight: approx. 170 kg (depending on model) - Operating costs: Low - Lifespan: Over 100,000 maintenance-free operating hours - Features: Grid drill holes for fixtures - Material compatibility: Marking of a wide range of materials Included: - 150x150 mm head, other sizes available - CE declaration of conformity - Warranty - Service - German software - Training for machine and software - Invoice Scope of Delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Foot pedal - Safety glasses Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. Our fiber lasers are ideal for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We perform all service ourselves and have the largest stock of spare parts directly in Germany, ensuring quick and efficient support. Shipping and Installation: With shipping, we provide remote setup and a brief introduction. Alternatively, we offer personal delivery, on-site installation, setup, and user training. Pricing depends on postal code. Consultation: For detailed advice, visit our website or call us directly. We are happy to answer any questions you may have. Additional Options: Models with 100 watts and 200 watts are also available upon request—ideal for larger projects or increased requirements for power and speed!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 30.222 h, tinggi total: 3.240 mm, berat keseluruhan: 8.880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014 and features a robust table size of 59 x 26 inches, with a maximum spindle speed of 12,000 RPM. It supports a tool capacity of 40 tools and boasts a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining, it offers a maximum table load of 4,410 lbs. If you are looking for high-quality milling capabilities, consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table size: 1,500 x 660 mm • T-slots: 6 x 18 mm • Maximum table load: 2,000 kg • Spindle nose to table: 101 mm • Maximum spindle speed: 12,000 RPM • Spindle power (15 min/continuous): 15 kW / 11 kW at 720 RPM • Spindle torque (15 min/continuous): 198.9 Nm / 116.7 Nm @ 720 RPM • Tool type: CAT 40 / Big Plus® • Tool capacity: 40 • Maximum tool diameter: 76 mm • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Tool-to-tool ATC time: 2 seconds Dimensions Lhodpfx Ajx D E Eqoc Hek Machine depth: 5055 mm