Unit pengelasan

Bielomatik K3633/023 K3633 023

Here we offer you a Bielomatik laser welding system.

Bielomatik Laser Welding System

Machine Description:
The laser unit with integrated cooling for the laser is located in the lower left section of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle.

The working area with the welding station, tooling (on the rotary table), and product clamping device is located in the central part of the machine frame. The control cabinet is installed at the rear. The welding station is secured towards the loading/unloading area by a laser-proof enclosure. The welding laser (laser source) is shut off when a maintenance door is opened.

Loading and removal of weldments are performed manually; the welding process runs fully automatic.

Laser type: YLR-300-AC-Y11/IPG
The cell was used for laser welding various plastic components (front frames) with part sizes approximately 460 x 280 mm.

Basic Data
Equipment included:
- 1 complete machine frame with housing, base, and safety devices, painted
- Adjustable machine feet, designed for forklift transport
- 3 manual maintenance doors in the laser-protected processing area, each safeguarded with a safety interlock switch
- 4 manual maintenance doors below the machine table
- Control cabinet firmly mounted at the rear of the machine

Laser system make: IPG
- 1 fiber laser 300W cw at the fiber end, 1070nm, fully air-cooled
- 1 power supply unit for laser module, target beam laser, and fiber optic
- 1 Vario-scan for 3D welding contours
- 1 scanner - 20 mm aperture
- Optical system: F-theta lens, focal length determines working area and distance
- 2x base tool with tool coding via transponder
- Hold-down/clamping system for mounting a mask with absolute position measurement system
- with pneumatic clamping system for controlled pressure application on each weldment
- Pneumatic air shower for lens protection

Microbox PC427B with RTX (Siemens)
- Pre-installed Siemens S7 PLC software
- Profibus, Profinet, Ethernet, RS232 interface
- 15” touch panel for operation and parameter input
- Machine lighting
- Connection flange for onsite extraction

Machine data:
Dimensions:
- Machine (W x D x H): approx. 2330 x 2350 x 2500 mm
Control cabinet:
- Fixed at the machine frame
- Required floor space (W x D): 5400 x 5400 mm

Technical Data:
Power supply:
- Number of phases/nominated voltage: 3x400V 50Hz
- Connected load: 5 kVA
- Main fuse: 16A

Exhaust:
- Nominal diameter: ∅160
- Air flow: 500-1000 m³/h
Fgodpeqay Uvsfx Adqoh
- Weight: approx. 2000 kg

Type: K3633/023
Condition: used
(Specifications subject to change and errors excepted!)

Should you have further questions, we would be pleased to answer them for you by phone.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.