Abstapelanlage

BIESSE RBO WINNER SC

Kondisi: sangat baik (bekas), DOUBLE-SIDED DESTACKING - Bridge Vacuum system (with pump) No. 2 vertical columns for the upper support beam No. 1 horizontal upper support beam (carriage travels on this) No. 1 motorized carriage with horizontal metal arms No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 external roller conveyors for stacking panels from destacking No. 1 external motorized roller conveyor for destacking, also fitted with belts for 90° panel transfer. Dimensions: 7168 mm (approx.) Separate electrical control panel OMRON electronic control system Perimeter safety fencing with safety mats Hnodpfxod Rg Dzj Aa Nog Working capacity (cycles/min): approx. 16 – 20 Panel thickness (min/max): approx. 10 – 50 mm Min. panel dimensions: approx. 250 x 320 mm Max. panel dimensions: approx. 1200 x 3200 mm Total connected load: 20.8 kW

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) Hnodpfx Aevtpcija Njg - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roll forming machine (12 stands) - Roller conveyor - Operator’s entry desk 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Hnedpfxjd Tx Ahs Aa Nsg

Kondisi: sangat baik (bekas), Coating and packaging line with thermoregulatable film, consisting of: Hnedpfx Aasgp Diae Neg a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Model Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Spool holder (6 upper spools, max. width 2450 mm + 6 lower spools, max. width 1450 mm) - Cutting and cross-sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) via sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is the tunnel) with hot air circulation (heating by electric resistances and fan), installed total power kW ? - Conveyor with metal bars (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from 4 to 20 m/min (approx.) d) ELME outfeed roller conveyor (idler rollers) for cooling (from approx. 3000 x 1500 mm)

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit Hodpfscggy Sox Aa Nong - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Hnjdpfxjttbd Ns Aa Njg

Kondisi: sangat baik (bekas), TECHNICAL DATA (NOT OF THIS MACHINE) — RETURN DEVICE for Edge Banding Machine (LEFT SIDE) When combined with a single-sided edge banding machine, it allows a single operator to ensure continuous feeding of the machine. Hnedoff R Tqspfx Aa Njg Air curtain section, infeed and outfeed (overall dimensions: 3520 x 2560 mm) 180° transfer (3120 x 2140 mm) with motorized roller conveyors and motorized belts Motorized conveyor (9080 x 1560 mm) Workpiece dimension range (MIN/MAX): Length — 240 mm / 2800 mm Width — 120 mm / 1300 mm Thickness — 8 mm / 60 mm (optionally up to 100 mm)

Kondisi: baik (bekas), ORMA LCC44/14 continuous press line with infeed conveyor and outfeed conveyor OSAMA glue spreader, type S4R/P-1400, 4 rollers Hedpevtx Hkjfx Aa Nsng

Kondisi: baik (bekas), Roller conveyors and chain conveyors Hnedod Sf Rqjpfx Aa Neg

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam Hnsdsd Rg Dpopfx Aa Nsg No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW