Pusat permesinan 5-sumbu

BIESSE ROVER C 6.40

Kondisi: bekas, nomor mesin/kendaraan: 008377, Arbeitsbereich Achse X: 3390 mm Arbeitsbereich Achse Y: 1570 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 13 KW Anz. kontrollierte Achsen: 4 Achsen Redpfsx Swb Aex Ad Rsr Anzahl Bohrspindeln: 32 Anzahl Werkzeugplätze: 10

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Rodpfx Adegtm U As Rjr Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: bekas, Tahun pembuatan: 2009, Biesse factory control system Working area on the X-axis: 3500 mm Working area on the Y-axis: 1585 mm Stroke on the Z-axis: 350 mm 2 working zones Bar worktable 8 adjustable support bars 4 pneumatic Bakelite support bars for lifting the panel 3 adjustable suction cups per bar with vacuum seal for securing the panel during processing 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK-type cone 10-position rotary tool change system on the working head 24-position chain tool change system—located at the rear of the machine Drilling head with vertical and horizontal spindles composed as follows: - 12 vertical spindles in the X direction - 12 vertical spindles in the Y direction - 6 horizontal spindles in the X direction Rodpfow D Dhaox Ad Rsr - 4 horizontal spindles in the Y direction 1 independent saw blade for producing X-grooves Carpeted front protection and safety system Perimeter safety fencing Chip extraction system with motorized conveyor belt Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Rjdewwiybjpfx Ad Ror Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation Rodoxraimopfx Ad Ror C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm Control: CUTCONTROL 2, 17" TFT screen – touch operation Powerful optimization software CD CUTTING-SYSTEM Label printer 3 air flotation tables 1800 x 600 mm Automatic angle pressure device up to max. 1300 mm Automatic cutout device Redpfxoytrvie Ad Rjr Offcut cutting device Cable remote control Pneumatic trimming stops Main saw unit 11 kW, saw blade Ø 350 mm Scoring saw unit 2.2 kW, saw blade Ø 180 mm Saw carriage feed 0 - 100 m/min, stepless Saw carriage return 130 m/min Rip fence feed 0 - 100 m/min (EU 0-25 m/min) Rip fence return 100 m/min Gripper clamps for rip fence: 7 pcs Compressed air connection: 6 bar Extraction port main unit: 1 x 120 mm Extraction port pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craft business Machine is in TOP CONDITION Available immediately from site

Kondisi: bekas, Tahun pembuatan: 2005, 2005 BIESSE ROVER B 4.40 FT Pusat kerja CNC 3-sumbu Spesifikasi teknis pada foto terakhir Jam mesin menyala: 45.343 Rodpfxswmdynj Ad Rjr Jam kerja otomatis mesin: 27.267

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Redpsunwk Tsfx Ad Rsr Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Rodpel Txw Hefx Ad Rsr Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs

Kondisi: sangat baik (bekas), Four-Side Planer Weinig Unimat 500 Redpethk T Iefx Ad Rer Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure rollers divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber outfeed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Work tables manufactured with Marathon Coating technology CE certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)