Pusat permesinan 5-sumbu

BIESSE ROVER C 6.65 CONF 3

Kondisi: bekas, Edge bander BRANDT highflex 1440 well equipped, PRE-MILLING cutters glue application pneumatic pre-cut guillotine pressure rollers final trimming saws top-bottom milling unit 2 x corner rounding units profile scraper Iedpsv H D S Sefx Aa Notb flat scraper polishing unit the machine is equipped with NC-controlled milling and a pneumatic package max workpiece height 60mm max edge thickness (coil) 3mm feed speed up to 14m/min machine in working order, can be inspected and tested before purchase

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Isdpfsrmucxsx Aa Notb Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: sangat baik (bekas), Viessmann Vitoplex 300 low-temperature boiler with 500 kW output, 6 bar, 110°C. Year of manufacture: 2012. Isdsvzlkropfx Aa Nstb

Kondisi: bekas, nomor mesin/kendaraan: 008184, main-specs-5axis-cnc Ijdpfx Aew Tivgoa Notb

Kondisi: baik (bekas),

Kondisi: siap digunakan (bekas), Caractéristiques techniques Usinage X 3180, Y 1340 Capacité de perçage X 3405, Y 1260 Verrouillage pneumatique Broche électro HSK63 12 kW, 3 axes Déplacement 0-100 m/min Itjdotqka Topfx Aa Nob Groupe de rainurage lame 0-90° Unité de perçage vertical 14 broches, horizontal 6 broches, armoire de commande avec écran 15 pouces, SOFT et commande inclus Machine à remettre en service Nombre de ventouses : 12 Nombre de poutres : 6 Caractéristiques usinage : pompe à vide Capacité de la pompe à vide : 100 m3/h Puissance et moteurs Dimensions hors tout

Kondisi: bekas, Tahun pembuatan: 2021, Technical Specification (English): Travel paths (X, Y, Z): 4,062, 2,922, 660 mm Number of spindles, vertical drilling head: 13 pcs. Number of spindles, horizontal drilling head: 6 pcs. Number of tools: 27 pcs. Number of milling units: 1 pc. Working area: 3,200 x 1,500 x 200 mm Motor power: 12 kW Control system: BECKHOFF MASTERWOOD Project 385 (Winner) --- Exhibition machine, year of manufacture 2021, immediately available, with new machine warranty from the manufacturer! 5-axis CNC machining center in gantry design for use in interior fittings, doors, staircases; optionally expandable with solid wood clamp for frame machining and arched windows Brief summary: --- Working area: X = 3,200 mm; Y = 1,500 mm; Z = 200 mm 1 high-performance 5-axis spindle, 12 kW, with HSK 63 F interface 1 fixed drilling head with 19 spindles with 7 individually selectable vertical drill spindles X direction with 6 individually selectable vertical drill spindles Y direction with 2 double horizontal drill spindles X direction and 1 double horizontal drill spindle in Y direction Saw unit integrated in drilling head 27 tool changing positions: Carousel tool changer with 22 positions and 102 mm spacing Linear 5-position tool magazine for large tool diameters Original SCHMALZ vacuum table (tubeless) Console table with 6 traverses Workpiece lifting device Automatic tool length measurement device 12 original Schmalz vacuum cups 114 x 140 mm, height = 125 mm 1 Becker vacuum pump, 100 m³/h 1 chip conveyor Construction software Masterwork: 2D Wop for standard applications: panel processing/interior fittings, arched elements, doors Master 3D Level 2: for more complex processing, optionally also upgradable for fully interpolating 5-axis operations Itsdpfx Ajxmk Atja Nob Prepared for use of solid wood clamps (arched elements), clamps available as option if required later Technical data as per attached, detailed description --- Total price for this configuration ex stock Oberkochen: on request! --- Freight and commissioning upon request! Options for frame production/arched elements with additional charges: --- Reference ring for mounting chip guide elements on 5-axis electrospindles with HSK 63F interface: €410.00 Basic kit for clamping arched elements – 6 pneumatic clamps with two movements for arched elements: €7,090.00 (technical details according to manufacturer - no guarantee!) Chip guide elements, price per piece: €460.00 All prices quoted are net, plus VAT. (technical data as provided by manufacturer - no guarantee!)

Kondisi: sangat baik (bekas), Planer/Moulder 9 heads Working width: 20 cm Working height: 22 cm 5 feed rollers in the table Heads: 1 bottom 7.5 kW 2 right 11 kW 3 left 11 kW Iodpfx Aotrdwtja Notb 4 right 11 kW 5 top 11 kW 6 bottom 11 kW 7 top 11 kW 8 bottom 11 kW 9 universal 11 kW PERFECT CONDITION!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.350 mm, Costa calibration machine Isdpfewmxh Tjx Aa Nstb

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Isdpjxnldbefx Aa Netb