Garis granulasi

BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG

Kondisi: diremaj di bengkel (bekas), 2452 Gtodpfx Ajd Sg I Isdtjt 1 used, partially overhauled and function-tested pelletizing line Throughput up to 500 kg/h, depending on material, consisting of: Kreyenborg stuffing device SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 L/D, drive 132 kW – AC frequency controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing zone (vacuum pump available as an option for extra charge) Kreyenborg double-piston screen changer K-SWE 160 RS backflushing type with screen area 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. hydraulic unit Pelletizer with 4 kW drive Water pump 2.2 kW Bypass system, water tank with 9 kW installed heater and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Pellet classifying screen Control cabinet with Siemens touch panel (updated) OPTIONAL at extra cost: ᐳ * Vacuum pump ᐳ Material conveying system, big bag station ᐳ Process water cooling unit / temperature control Additional pelletizing lines available ex-works Wuppertal, ask for our current machine stock list or visit us.

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, tinggi kerja: 2.000 mm,

Kondisi: diremaj di bengkel (bekas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h (material-dependent), consisting of: Gsdpfx Adeh Eyd Rjtjtt Kreyenborg SW 100 stuffing unit, 7.5 kW drive Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm Flight depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt backpressure device (“Stuffer”)* Screen changer: Double piston Kreyenborg K-SWE 160 RS backflush type, screen area 244 cm² BKG Underwater Pelletizer AH 300, complete with: Start-up valve incl. hydraulic station Pelletizer with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG Granule Centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost: • Vacuum pump • Granulate vibro sifter, conveying system, Big Bag station • Process water cooling/chilling unit / temperature control Additional pelletizing systems available ex stock Wuppertal. Request our current machine inventory list or visit us.

Kondisi: hampir baru (bekas), Set, packed in a wooden crate, screw and barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Godpfx Ajdm Aghedtott

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roll forming machine (12 stands) - Roller conveyor - Operator’s entry desk Gsdovtpciopfx Adtjtt 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Tahun pembuatan: 1996, Kondisi: siap digunakan (bekas), A Forel multi-pane insulating glass production line with fixed spacer and Swiggel is available. Glass production capabilities: double/triple glazing; layer construction: coated/uncoated; insulating glass pane dimensions (X/Y) min./max.: 400mm x 200mm / 2500mm x 2000mm; pane thickness range: 12mm-50mm; total line length: 30,200mm. Line components: 1) Feed to washing machine, 2) Washing machine, 3) Discharge from washing machine, 4) Feed for spacer placement, 5) Spacer placement, 6) Discharge from spacer placement, 7) Feed to assembly station, 8) Assembly station, 9) Discharge from assembly station, 10) Feed to roller press (non-gas press), 11) Discharge from roller press, 12) Tilting roller table for unloading. Documentation available. On-site inspection possible. Gtsdpfx Aeugv R Iodtjt

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Gtjdpfxotunccj Adtot Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t From series production

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 040501, Henneken C2 Vakuumtumbler in sehr gutem Zustand. 3.650 Liter Fassungsvermögen, Front- und Rücktüren. Abmessungen: 2,55 m breit, 2,04 m lang, 2,28 m hoch. Ebenfalls erhältlich (gegen Aufpreis): passender Henneken Kistenkipper. Godpfsqwhiiex Adtstt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 403, Equipment / Additional Information: Unwinding Device: Gjdpsn D Ew Isfx Adtjtt Roll Holding: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Dimensions: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Power Upper Heater: 18.8 kW Installed Power Lower Heater: 14.1 kW Idle Cycle Rate: 40 cycles/min Main Drive Motor Power: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: approx. 30 l/h Air Consumption at 7 kg/cm²: approx. 125 l/cycle Total Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending cup, Capacity = 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo cup, Capacity = 300 ml / 12 oz 509 // 452 // 6 // Ice cream cup, Capacity brimful = 140 ml / Capacity at 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo cup ⌀ 81 / 180 ml 740 // - // - // Standard cup with sealable rim ⌀ 75–120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo cup, Capacity = 80 ml 595 // 456 // 10 // Vending cup, Capacity = 150 ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granulate cup 180 ml / technical part with flat sealing rim

Kondisi: diremaj di bengkel (bekas), Stock No. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw Ø 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), belt-driven Heating zones – control sections for downstream equipment Control cabinet, melt pressure sensor Inspection/test run available at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face or water ring) Gsdpfx Adjiyyndstjtt > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or visit.