Bunker tugas yang kokoh

BLUELINE FEED HOPPER

Kondisi: baru, Tahun pembuatan: 2025, Features: - Overbelt neodymium magnetic separator - HP - Dust suppression - Belt speed control - Self-propelled drive, semi-trailer Csdpfx Agew Elbdo Dorb

Kondisi: bekas, Goudsmit SEPB080013 for sale Manufacturer: Goudsmit Crodpfx Ager Dtauj Djb Model: SEPB080013 Magnet dimensions (L x W x H): 1,040 x 602 x 251 mm Axle spacing: approx. 1,550 mm Rubber belt: 650 mm (new)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.330 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7535, berat keseluruhan: 28.500 kg, daya: 405 kW (550,65 hp), Mesin penghancur mobile LINDNER URRACO 4000 DS (self-propelled) Konveyor keluar dengan magnet di atas, sistem penekanan debu, kompresor udara untuk pembersihan mesin Sepasang poros SF12.9 beserta aksesoris Crjdpfxexyq Ipo Ag Deb Sepasang poros pra-penghancur dengan aksesoris tersedia berdasarkan permintaan

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), berat keseluruhan: 3.520 kg, panjang total: 5.825 mm, lebar total: 1.705 mm, tinggi total: 2.914 mm, tegangan masuk: 400 V, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, henti darurat, de-001 Crjdpfx Agswyu Eue Dsb

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 11.850 h, gaya penekanan: 88 t, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), Te koop: gebruikte balenpers + gebruikte transportband Merk: HSM VK 88 + Stadler KF1800 Cedpfsyuyg Ssx Ag Derb De balenpers betreft een VK 88 R – FU, uitgevoerd met frequentieregelaars, 2 x 45 kW motoren. * Optie voor ontblokkeer-cilinder * Kogelgewrichtbevestiging hoofdcilinder * Stadler transportband, 1600 mm intern Bouwjaar: 2012 Totaal draaiuren: 11.850 De stang van de hoofdcilinder en het afdichtingsset zijn recent vernieuwd. Te vervangen: 2 voorste vloerplaten van de perskamer: midden en voorkant van het kanaal Smeren/vervangen: Enkele zijdelingse diabolorollen zijn gebruikt en in bedrijf; sommige zijn roestig, sommige in goede staat. De pers draait naar behoren en het knopen van de balen gaat goed. Aandrijfwielen ram: OK Zijwielen ram: OK Hoofdcilinderstang: vrijwel nieuw Hoofdcilinder afdichtingsset: vrijwel nieuw Ram zijnylon strips: 80-90% in goede staat. Fijnafstemming geometrie mogelijk door toevoegen van vulringen (klant heeft onderdelen op voorraad). Mes/tegenmes: goed, ca. 70% Naaldrollen: in orde, maar vervangen is aan te raden + de afsluitplaten Hoofdfrequentieregelaar 1 van 2: Totaal 2 x 45 kW: één van de twee is defect. Het is niet bekend of deze vervangen wordt. De pers draait momenteel op één pomp. Zijwanden perskamer: Zijwanden zijn versleten ter hoogte van de nylongeleidingsplaten: enkele millimeters tot gemiddeld 2 mm. Transportband: Kettingrollen zijn gebruikt en vertonen lichte speling. Smering ontbreekt, maar zijn nog in goede staat. Geleidingsstrips zijn in orde. Opvoerlatten zijn vrijwel geheel versleten. Start/stop via frequentieregelaar. Zijwanden zijn goed op het schuine gedeelte en in de put. Draadrollenplatform: niet inbegrepen.

Kondisi: diremaj di bengkel (bekas), Technical data for feed hopper with hydraulic moving floor and bag opener for recyclable materials from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions in current condition: 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the Machine: The feed hopper with bag opener was operated in a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the hopper using wheel loaders. The bags were opened by the bag opener and the recyclables were conveyed to a sorting plant, or commercial waste was metered for further processing. The system functioned flawlessly until it was dismantled and was replaced with a larger unit with higher throughput. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was performed and parts replaced: - Disassembly of the feed hopper and bag opener into individual components. Cleaning, partial sandblasting, priming, and painting of steel components. - Various wear and protective plates were fabricated and installed new. - The worn ends (approx. 40 cbm) of the moving floor tubes were cut off. New tubes were welded on and the surfaces were smoothed. - Complete renewal of the sliding plastic plates for the hydraulic moving floor. - Removal of the hydraulic power unit from the moving floor, draining the hydraulic oil tank, replacing the oil filters, and refilling with new hydraulic oil. - Replacement of all three hydraulic manifolds, all valves, the oil sight glass, and all hydraulic hoses from the power unit. - The seal kits and hydraulic hoses on all three hydraulic cylinders of the moving floor were replaced. - All six limit switches (proximity sensors) on the moving floor were replaced. - The conveyor chains on both sides of the scraper conveyor were replaced. - Seven driver strips of the scraper conveyor were replaced. Crjdpfx Agoyizxrs Djb - The drive motor for the bag opener's cutting shafts was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - The entire sliding plastic plates for the hydraulic movement of the bag opener were replaced. The bag opener can be moved in depth, so the system can be used for commercial or residual waste without the bag opener when required. - Both side collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire installation was rewired electrically and reconnected. - The plant control system in the control cabinet was retrofitted by BRT Hartner to autonomous individual control and the standard program was reloaded into the control system. - The unit was commissioned and tested by BRT Hartner; see functional video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Codpfx Agjyz Af Ej Dorb Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 88 t, lebar bukaan pengisian: 990 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat keseluruhan: 23.000 kg, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 643 m³/jam, Good day, We hereby offer you, subject to prior sale, a used baler including conveyor belt, wire-tying stations, and bale slide from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Credpfx Asymmtceg Deb Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions incl. conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film materials. The baler is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material processing. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Kondisi: siap digunakan (bekas), The subject of my auction is a conveyor belt approximately 18 meters long with a belt width of 0.55 meters. Crsdpsumu R Iefx Ag Deb Possibility of transport.