Mesin pemoles/mesin pengamplas

Boere Polijstmachine 500-3

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Dedpfx Afjd Ixadstjup Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. Duodpfx Aopugwisftsp The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Tahun pembuatan: 2026, Kondisi: baru, VKM - Package Singulation for Milled Timber Dedpfxog Rxhgs Aftoup With the singulation of milled timbers, whether loosely stacked or bundled, already milled timber can be processed further in a cost-effective manner. In a two-stage process, the timber is singulated for subsequent processing. It is also possible to automatically feed the singulated timber into a continuous process. The feeder is mechanically designed to reliably process even warped timber. Furthermore, it can be adjusted to the diameter of the timber to ensure that only a single piece is transported at a time, preventing blockages or downtime further along the processing line.

Kondisi: baru, Tahun pembuatan: 2024, SJET系列为多功能工业零件清洗机，操作极其简便。 Dusdpfx Aod I Aw Esftsp 转盘式清洗机。旋转篮筐零件清洗机。 非常适用于除油和维修清洗。 工作原理：将装有零件的篮筐置入设备后，热水与清洗剂混合液喷淋至旋转篮筐上。特制不锈钢喷嘴与篮筐的旋转运动，确保篮内所有零件得到彻 底清洗。水在返回水箱前经过过滤，有效延长清洗剂使用寿命并降低消耗成本。 SJET系列有效减少水与清洗剂用量，帮助用户保护环境。 SJET设备全部采用AISI 304不锈钢制造。 可选不同篮筐规格和容量。 可选清漂和烘干功能。 可选不同上盖类型。 旋转篮式清洗机。 如需更多参数及选项，欢迎随时联系我们。

Kondisi: bekas, Tahun pembuatan: 2020, nomor mesin/kendaraan: 031EP-2020, 24558 Technical Data: - Abrasive diameter: 150 mm - Grinding unit pivotable on articulated arm - Swivel radius of grinding arm: 2000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2200 rpm - Table dimensions: 1500 x 880 mm - Table height: approx. 920 mm Dusdpfx Ajvazz Dsftjp - Drive: 400 V / 3.6 kW - Space required: approx. W 1600 x H 1600 x D 1600 mm - Weight: approx. 250 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach. Dujdjtmqi Dspfx Aftep

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Dujdpsx Uwlaofx Aftop

Kondisi: bekas, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units Dsdjt Tqy Espfx Aftjup - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 150 mm, tinggi penggerindaan: 100 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, GREIF 7-station through-feed flat grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations each with 4 kW drive, each station frequency-controlled, each station tiltable by ±15° for cross-grinding, max. grinding width 150 mm, max. grinding height 100 mm, contact wheel diameter 200 mm, abrasive belt dimensions 150 x 2500 mm, pneumatic belt tensioning, belt oscillation, machine including return conveyor, including paper band filtration unit with 1500 liters capacity. Since the contact wheels are directly driven, the system can also be used for polishing or brushing. Duedpetq Twvefx Aftsp Upon request, this system can also be offered fully refurbished.

Tahun pembuatan: 2008, Kondisi: bekas, Die automatischen Rohrpoliermaschinen „Alan Richardson“ können auch zum Schleifen, Reinigen, Entfernen von Oxidation und Rost eingesetzt werden. Die Maschine befindet sich in gutem, gebrauchten Zustand und ist voll funktionsfähig. Ein Probelauf ist möglich. Technische Daten: Modell: Alan Richardson Hergestellt in: England Baujahr: 2008 Rohrlänge bis zu: 1700 mm Dokumentation: vorhanden Standort: Marijampole, Litauen Bei weiteren Fragen stehen wir Ihnen gerne zur Verfügung. Dusdpfx Aoph T N Ssftop