Boge S20 - kompresor 2 sekrup

Boge S20 - 2

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Drilling heads on each side at the front included. Very good condition. Hfjdpfx Ajd N Rb Djhnjh Available immediately.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany Hedpfjhy Tp Dox Ahnofh

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Hfsdpfjwu Ez Nox Ahnjh

Kondisi: bekas, Technical details: Swing diameter: 626 mm Turning length: 3000 mm Max. turning diameter: 600 mm Spindle bore: 100 mm Spindle speeds: 2,800 rpm Hfjdpfjvgmimex Ahnoh Approx. machine weight: 18 t Machine overhauled in 2003 and equipped with Siemens 840 D - NC steady rest - Power chuck 400 mm - 12-position turret

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Hsdpfxjttbd No Ahnsfh

Kondisi: baik (bekas), Tahun pembuatan: 2011, Mesin dalam kondisi kerja yang sangat baik. Deskripsi dan detail teknis tersedia pada foto-foto. Hodox I Rkpopfx Ahnsfh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 16.000 h, Fungsionalitas: berfungsi sepenuhnya, 1 unit used two-component injection molding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tons Tie bar spacing: 720 x 720 mm Minimum/maximum mold height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Injection weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Hfsdpsv S E Dgefx Ahnsh Injection weight in PS: 31 g Control system: Selogica Please request technical specifications.

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Hjdpfju Rptyjx Ahnsfh Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: diremajakan ulang (bekas), berat keseluruhan: 7.800 kg, Jaw opening: 650 x 450 mm Hfjdpfxjq Tth Ts Ahneh Capacity: 12 - 60 m³/h Gap width: 35 - 150 mm Weight: 7,800 kg Power requirement: 45 kW Completely workshop overhauled and newly fitted with bearings

Kondisi: baik (bekas), Tahun pembuatan: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control type: CNC control CNC: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X-travel: 630 mm Y-travel: 630 mm Z-travel: 630 mm B-axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool stations: 80 Hodpfx Ahex Hn D Dsnefh Spindle speed: 16,000 rpm Tool changer: Double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 90 m/min Drive power – spindle motor: 40 kW Internal coolant supply: 50 bar Number of pallets: 2 Pallet size (LxW): 400 x 500 mm Spindle run time: 1,000 h Operating hours: 3,000 h Max. workpiece swing diameter: 720 mm Media interface: 5-way Additional information: - Equipped with NC rotary table. - State-of-the-art spindle technology - Ideal for precision machining tasks. - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage control Machine can be inspected under power by prior arrangement.