Penggergajian lengkap (stasioner)

Boldrew Bandsägemaschine Typ A-1200 Z

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, jam operasional: 20.200 h, kapasitas angkut: 5.500 kg, jenis bahan bakar: gas, Perlengkapan: hidrolika gripper, penjepit, For sale: Hyster S 5.5FT LPG Forklift The forklift is fully functional and in good condition. Note: Not supplied as pictured with forks, but instead offered with a Mayer paper roll clamp with hydraulic rotator from 2005 (see last photo). Technical Data: Year of manufacture: 2012 Rated capacity: 5,500 kg (5.5 tons) Load center: 600 mm Turning radius: approx. 2,375 mm - 2,534 mm Lift height: up to 5,300 mm Free lift: available Transmission: DuraMatch™ 1-speed or DuraMatch™ 2-speed Travel speed (laden/unladen): approx. 16.7 - 17.2 km/h Dimensions: approx. 3,500 mm x 1,420 mm x 2,500 mm Weight: approx. 7,800 kg Transportation and loading can be organized Europe-wide on request, subject to additional charges. All prices are exclusive of VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Hnedjwalyijpfx Agkon Are you looking for a high-quality yet cost-effective metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Hsdpjhpktvsfx Agkenn Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: bekas, 3264 Complete Sawmill Line Möhringer / Paul Used, still connected to power until 30/06/26 Consisting of: - Log cross-cutting table with powered conical rollers Length measurement by Hecht with remote-controlled light barriers - 1 transverse conveyor to the frame saw, 7000 x 5500 mm (LxW), Cam chains in mint condition - 1 transverse conveyor, 3800 x 4000 mm (LxW) - 1 roller conveyor before the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for model timber, cross-extraction with 2 selector flaps - Quick-clamp carriage for frame saw (EWD), with auxiliary carriage - 1 auxiliary conveyor for log infeed before the frame saw - Butt reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year 1994 Feed opening 700 mm, stroke 550 mm, saw bands hydraulically adjustable, conveyor belt, log handling with adjustable laser, round timber measurement by Hecht, Jansen tensioner, angels, 60 saw bands, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year 1994 With pre-cutting, light barriers and laser for adjustment - 1 roller conveyor 4000 x 1400 mm (LxW), with corrugated rollers, cross-extraction with air cylinders - 1 S-type conveyor with buffer, 3500 x 4000 mm (LxW), pusher by Albert made of square tube - 1 S-type conveyor 3000 x 5500 mm (LxW), motor with adjustable slip coupling, function monitoring, pusher made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year 1992 - 1 double edger Paul KME 2 / 750 R, year 1988 With strip separator, right bushing motor-operated adjustable, cross-cutting, length sorting, preselection programs by Österle - 1 conveyor belt 7400 x 400 mm (LxW) - 1 conveyor belt 4000 x 400 mm (LxW) - 1 conveyor belt 3000 x 500 mm (LxW) - 1 trough conveyor approx. 6500 x 500 mm (LxW), inclined, for sawdust - 1 HOLTEC trough conveyor approx. 6500 x 500 mm (LxW), inclined, for wood chips - 1 HOLTEC trough conveyor, horizontal, with left- and right-hand drive as a distributor over the bins - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Setter VOLLMER GSA, year 1996 - Frame saw sharpening machine VOLLMER (minor repairs needed, push cylinder bent) For sale on behalf of customer, ex location near 34125 Kassel, without dismantling, transport or assembly Dismantling, loading and transport can be offered as an option by us Errors in description and price excepted To avoid possible misunderstandings, inspection on site after prior appointment is strongly recommended Sale is as-is Hnedpfjyzr Tfsx Agkjn Technical data, condition descriptions, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines, it applies: “purchased as seen” Images and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted. Hedpfxswvqkls Agkjnn

Kondisi: baru, Hydraulic cable winch HAW1700 with electric valve, including manual control and radio remote control for mounting on log splitters, cranes, mini excavators, tractors, forklifts, mower crawlers, and telehandlers. Suitable for use in viticulture and horticulture, agriculture, construction, forestry, and many other applications. Fitted with an electric hydraulic valve and radio remote control. With the HAW1700 hydraulic attachment winch, you can greatly simplify a variety of tasks. Maximum cable capacity: 30 m with 6 mm steel wire rope. Standard configuration: 20 m of 6 mm steel wire rope provided. • Pulling firewood to the log splitter and positioning it • Pulling timber logs onto trailers • Extracting rootstocks and trees • Attachment winch for forwarding cranes and compact excavators • Winch for small tractors and narrow-gauge tractors Rugged steel construction with multiple mounting options (bottom, rear, top) using M12 threaded holes. This allows for highly flexible use of the winch. Large, double-supported cable pulley for extended rope life. Standard pulling force: 1700 kg. The winch can be installed in various positions. Hydraulic brake available as an option. Depending on your requirements for pulling speed and force, we can offer you a range of options. Contact us for individual consultation. • Maximum operating pressure: 225 bar (peak) • Continuous operating pressure: 175 bar • Displacement: 400 ccm • Torque at 225 bar: 870 Nm (peak) • Continuous torque: 380 Nm • Maximum pulling force: 1700 kg • Weight: 49 kg • Rope speed: 47 m/min at 60 L/min oil flow • Color: Red • Includes hoses from valve to motor Dimensions: • Length: 500 mm • Length with rope guide: 570 mm • Front width: 120 mm • Rear width: 180 mm • Bearing width: +30 mm Hodpfx Ajfn Tvhjgkenn • Motor width: +200 mm • Height: 250 mm Included: Radio remote control for winch operation • Control range: up to 100 m • Temperature range: -35°C to +80°C • Protection class: IP65

Kondisi: baru, Tahun pembuatan: 2026, Produk Baru Kami: Wheel Loader Josan Heracles 1410. ▶️ Dengan penggerak hidrostatik di setiap roda secara terpisah. Lincah, penuh tenaga, dan serbaguna. Berkat kelincahannya, Wheel Loader Josan Heracles 1410 sangat cocok untuk pekerjaan di area sempit. Meskipun memiliki konstruksi yang ringan, di balik desain rampingnya terdapat tenaga yang kuat. Hjdpfx Ajx H Ulzsgkenn ▶️ Mesin diesel Yanmar ▶️ Berat kerja: sekitar 1180 kg ▶️ Daya angkat maksimum: 800 kg ▶️ 3 silinder ▶️ Standar emisi: EU Stage V & EPA Tier 4 Final ▶️ Avant quick coupler ▶️ Kompatibel dengan 200 attachment ▶️ Radius putar dalam: ▶️ Radius putar luar: ▶️ Dimensi sekitar: Tinggi dengan bucket: 2715 mm Tinggi: 2200 mm Panjang dengan bucket: 3030 mm Panjang: 2395 mm Lebar termasuk ban: 100 cm ▶️ Standar emisi: EU Stage V & EPA Tier 4 Final Harga netto: €13.399,00 Pajak (MwSt.): €2.545,81 Harga bruto: €15.944,81 ▶️ Transportasi ke seluruh Jerman tersedia ▶️ Layanan dan bengkel seluruh Jerman untuk wheel loader yang dibeli dari kami. ▶️ Suku cadang tersedia di gudang JOSAN — Tangguh, baru, dan terjangkau! Kesalahan dapat terjadi. Gambar/teks dapat berbeda. Silakan tanyakan mengenai ketentuan garansi kami.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 14.754 h, Perlengkapan: penggerak semua roda,

Kondisi: baru, Column drilling machine: precise, quiet, and reliable. Manufactured in compliance with strict safety standards. Precision spindle axis with hardened Morse taper, ground base plate. Supplied with electronic variable speed drive. Swivel table and vice, 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Tapping capacity in steel: R50 mm M14. Spindle taper: MT2. Spindle travel: 90 mm. Spindle quill diameter: 52 mm. Column diameter: 98 mm. Distance column to spindle centre: 201 mm. PU transmission. Electronic speed variator (E). Spindle speed: 270 – 4,200 rpm. Motor power: 0.75 kW / 220 V single phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg. Hsdpfxeir Aiho Agksnn

Kondisi: baru, Tahun pembuatan: 2025, MAMMUT SYSTEM: High-speed log profiling line (up to 600 mm diameter) designed for the production of cants, beams in the “uso fiume” and “uso Trieste” styles, general lumber, and semi-finished components for pallets. FULLY HYDRAULIC MACHINE Hnjdpfxjhpbths Agkon Minimum log diameter: 120 mm Maximum log diameter: 600 mm Minimum working length: 1800 mm Maximum working length: Infinite (∞) Cutter spindle diameter: 60-80 mm Cutter diameter: 300 mm Feed speed: 5 - 70 m/min.

Kondisi: bekas, Tahun pembuatan: 1997, Lini 3 mesin Stenner MHS9 dari tahun 1997 Hnedpjw Nrhkefx Agkjn