Sistem kontrol

BOSCH REXROTH AA4VG71EP4D1/32R-NSF 52F01/DP-S

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Kodpfx Ajfxyhfjahofa Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baik (bekas), Driven and Non-driven Conveyor Rollers SSI Schäfer Ksdpfx Aaegpw Rnohofa • Partial accumulation roller conveyors • Various lengths available and customizable to suit your warehouse project • Clear width: approx. 460 mm • Mergers and diverters available • Conveyor curves available Large quantities of well-maintained driven and non-driven conveyor rollers in stock. For further information, please refer to the attached images. The drawings show the current assembly status, but modifications are of course possible. We are happy to assist you with transport! Payment is accepted exclusively by: • Bank transfer • Advance payment All prices are net prices (plus VAT). Of course, you will receive an invoice with VAT shown separately. Please also see our other listings. Haven’t found what you’re looking for? Do not hesitate to contact us.

Kondisi: bekas, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 Kodpfx Aeuif Iujahofa 16 bar max. 110 degrees Celsius 60 m³/hour 20.2 m head n 2900 rpm This offer is directed exclusively at commercial customers as defined by §14 of the German Civil Code (BGB). No sale to private individuals.

Kondisi: diremajakan ulang (bekas), Refurbished Rexroth double pump for Krauss Maffei SGM machines. Kjdpfsfnp U Nex Aahofa Service, repair, and replacement of Rexroth, Voith, Bosch, and Moog hydraulic pumps. Photos are sample images; actual pumps may differ in color!

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Kfedpfxjvuucke Aahja

Kondisi: siap digunakan (bekas), Power: 75 kW, previously used for dairy products. Kfsdpfxoiwf Uus Aahja

Kondisi: bekas, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 120 l, warna: merah, tinggi angkat: 6.900 mm, tipe tiang: telescopik, Tahun pembuatan: 2022, jam operasional: 2.280 h, Perlengkapan: pendingin udara, Year of manufacture: 2022 Unladen weight: 6,850 kg Kfedpow Afq Tofx Aahja Payload: 3,300 kg Gross vehicle weight (GVW): 10,150 kg Dimensions (L x W x H): 474 x 233 x 230 cm

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C1-25sE_1, CrimpOne C1-25sE - Made in Finland Servo-electric Hose Crimping Machine with Spindle Drive Ksdpfx Asvr Dnkoahsfa Technical Specifications Main Technology: AC servo ball screw Max. Crimping Force: 250 kN Crimping Range: 10 - 54 mm Max. Hose Size: 1¼ inch Master Die D / L: 84 / 78 mm Servo Motor: 5 kW Repeat Accuracy: 0.01 mm Max. Opening: +100 mm Max. Feed Channel: 45 mm Max. Closing Speed: 80 mm/s Max. Opening Speed: 80 mm/s Max. Crimping Speed: 10 mm/s Length: 1,250 mm Width: 850 mm Height: 2,100 mm Weight: 700 kg Control Unit: TC12 - Omron Touchscreen

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Sistem pengisian terdiri dari komponen-komponen berikut: 1. Palung melintang: Lebar palung: 2,8 m Tinggi palung (sisi rendah): hanya 0,8 m Kedalaman palung: 1,2 m termasuk pelindung kisi atas termasuk motor gearbox ulir 3 kW tipe kiri dan kanan tersedia Opsional: sasis, dudukan forklift, ... 2. Sekrup pengangkat: Panjang: 2 m (panjang lainnya juga tersedia) Kemiringan dapat disesuaikan termasuk motor gearbox ulir 3 kW 3. Sekrup penekan: Panjang: 2 m (panjang lainnya juga tersedia) Terbuka di bagian depan Semua sekrup berdiameter 200 mm dan sepenuhnya dilas pada pipa baja! (diameter sekrup yang lebih besar juga tersedia atas permintaan!) Tanpa pengkabelan dan panel kontrol Kami juga dengan senang hati menawarkan produksi khusus! Kedpfxovrcfuo Aahefa Harga belum termasuk PPN.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, Here are the technical specifications of the machine on offer: If the press does not exactly match your requirements, you can request an individual quote tailored to your needs with just one click: Contact us for a customised offer. Kodpfx Aajfhcc Ijhsfa HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly attractive prices! ##### Technical Details Pressure: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Oil tank: 10 l Robust machine frame with solid welded construction, manufactured in accordance with DIN 8651 ##### Additional Information Thanks to durable engineering, low-maintenance and reliable Cylinder with induction hardening and chrome plating Steel quality: structural steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 t rotary mandrel attachment, mechanical, with locking mechanism, spline shaft and brake, offering 220 mm travel Hydraulic hand pump with max. 15 t pressure and 160 mm travel, with return spring Throat depth from rear wall to centre of tool holder: 280 mm Assembly table can be swivelled 180 degrees to the right, featuring a 60 mm centre bore, M12 T-slots Clearance height between swivel table and ram/rotary mandrel guide: 450 mm Clearance height up to the additional table (insertable): 650 and 800 mm Additional table with central bore, 60 mm (insertable), M12 T-slots, size 270 x 200 mm Base height with two compartments for additional table: 750 mm On the cylinder, a hardened pressure plate with a diameter 10 mm larger than the cylinder Tool holder M30 in the cylinder head Pump lever operated from top to bottom Oil tank for 10 l hydraulic oil AW 46 Machine frame finished in blue, RAL 5012, textured paint Attachment parts finished in anthracite, RAL 7021 Hydraulic single-column combination press as special machine, 15 tonnes, manual operation (C-frame press, hydraulic press) ##### Are you looking for a customised machine? Contact us for a tailored quote. Our hydraulic presses are built in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they are fully compliant with the national Brazilian safety directive NR 12, which is based on the former. Our major strengths are special-purpose machine manufacturing and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly low prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.