Tekan kolom tunggal - hidrolik

DUNKES HZ 40 (CE)

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: Bedpfx Ajfxyhfohwecw The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-to-hu-01 Bedjhhnblopfx Ahwjcw

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Hydraulic round timber grapple, suitable for round timber diameters from 7 cm to 66 cm. Bcodpfxov N Eiqo Ahwow

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation Bedpfx Ahocubatewocw - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading - operating manual available

Kondisi: baru, Tahun pembuatan: 2025, CHIPPER MACHINE, brand KÄLIN Hobeltechnik, model MPC-P: • Approximate production of wet shavings: 3,800 kg/h • Log carriage dimensions: 2,800mm x 1,100mm x 1,300mm • Maximum log length: 2,650mm • 2 symmetrical, removable cutter heads of 1,140mm each, divided into 3 sections of: - Diameter: 200mm - Length: 380mm - Number of knives: 8 - Cutter heads can be sharpened as a complete unit, without needing to remove the knives - ULTRA-FAST CUTTER HEAD CHANGE, less than 15 minutes! • 2 spare sets of cutter heads for replacement during the sharpening process • Cutter head motor power: 90kW / 120 HP • Carriage speed controlled by ELECTRONIC INVERTER: 0.6 to 36 m/min • Automatic control of the feed-to-load ratio • 1 feed drive motor, heavy-duty double chain drive: 15kW / 20 HP • Material level control system within the carriage to prevent running empty • Electrical cabinet and control panel with touch screen for function management Bedpfx Ahjvk Saxewocw • Lower motorized discharge conveyor for shavings: 5,000 mm x 800 mm • Weight: 11,000 kg • CE-compliant

Tahun pembuatan: 2020, Kondisi: baru, Oxygen and temperature measurement in molten metals Bcedpfogqr A Dex Ahwew

Kondisi: bekas, Pressure: 55 t Outreach: 250 mm Stroke: 10–90 mm Table size: 640 x 495 mm Strokes per minute: 120 spm Slide adjustment: 55 mm Slide area: 290 x 210 mm Slide bore: 40 H7 mm Bcedpfx Ajcp Apyehwew Passage opening in table: 220 x 190 mm T-slots: 22 mm Clamping plate: 620 x 485 x 65 mm Total power requirement: 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Centralized lubrication system by Vogel - Balluff cam controller - Height-adjustable table - Mechanical overload protection in the ram (shear plate) - Control cabinet with touchscreen - Foot switch

Kondisi: diremajakan ulang (bekas), Sortierlinie für trockene Bretter - Sortierlinie für trockene Bretter - 20 Sortierstationen – Bandanlage - automatische Leistenentnahme - Trimmer von Almab mit 16 Sägeblättern - Automatisierung: TG Automation, Schweden – Sortierung - Dynalyse MC Pro 2400 System - Markierungs-/Drucksystem: Alpha Dot Merlyn 350 - Trommelhacker Erjo 204 MA - Stapelanlage Almab mit 9 Kassetten - Paketpresse Bjdpfsvzqcyex Ahwocw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Includes various accessories. Documentation available. Bsdpfx Ahst H Rd Rswscw

Tahun pembuatan: 1978, Kondisi: bekas, Pressure 100 t Throat depth 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Ram area 600x500 mm Table area 720x600 mm Machine weight approx. 9 t Bcjdpfelp U Dpjx Ahwew Two-hand operation, Stroke and pressure shut-off, Pressing time