Brush deburring machine

Boschert K 3

Kondisi: baru, Tahun pembuatan: 2025, de Dodpfsm Twnljx Aavjcp

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, designed for underground storage of heating oil and diesel fuels, equipped with 1 manhole (optionally available with 2 manholes). Dodpfxsi Enxdj Aavocp Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg Additionally, our tanks can be equipped with the following accessories: - Leak monitoring with vacuum or pressure leak detector - Manhole chamber with accessible or drivable shaft cover - Partition walls (for multi-compartment tanks) - Internal coatings (e.g., two-component epoxy resin), partial or full linings - Content and level measurement systems as well as control and automation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel, or petrol - Dispensers for diesel, biodiesel, and petrol – upon request, including complete fuel management system - External tank insulation with PU foam The tank is internally cleaned and the external coating has been completely refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply provide your delivery location to receive an immediate quotation for the exact freight costs. If you require further information, please call us or send us an email. We also offer trade-in and purchase of tanks/containers – please contact us for details. Delivery time by arrangement! We always keep the following tank sizes in stock: - 10,000 | 13,000 | 16,000 | 20,000 | 25,000 | 30,000 | 40,000 | 50,000 | 60,000 | 80,000 liters.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 270 mm Maximum diameter over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 630 mm Headstock: Standardized spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F66 Maximum bar capacity, diameter: 36 mm / 60 mm Standard power chuck, diameter: 210 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 4000 rpm Spindle positioning, increment: 0.1° C-Axis: Programmable increment: 0.001° Spindle clamping force: 80 Nm Pneumatic clamping cylinder: 3400 daN Cross Slide: Travel on X-axis: 230 mm Radial resolution: 0.0005 mm Driven by AC motor, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z-axis: 720 mm Resolution: 0.001 mm Driven by AC motor, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feed Rates: Working feed (X/Z axes, stepless): 0–5000 mm/min Rapid traverse (X/Z axes): 8/10 m/min Feed force (X/Z axes): 420/670 daN Turret Tool System: Number of tool stations: 12 Number of driven tool stations: 6 AC motor, peak power (intermittent duty): 3.7 kW Maximum intermittent torque: 36 Nm Maximum drive speed: 5000 rpm Dsdpfjzb U Epox Aavecp Standardized toolholder fixing: VDI 30 Maximum tool shank section: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant System: Tank capacity: 120 liters Pump rate: 10 l/min Pressure: 5 bar Inventory 2230043 includes: 1 Fanuc 18i CNC control 1 A2-6 spindle headstock 1 12-station VDI 30 turret for 6 driven tools 1 pneumatically controlled tailstock support 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 3-jaw chuck 1 Brucker CM5 live center 1 ESX-25 radial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00552 1 ESX-25 axial drilling/milling head, max speed 5000 rpm, without EX nut, ref 4100.00550 1 KENNAMETAL ESX-25 without EX nut 1 EWS ESX-25 without EX nut 4 left radial toolholders, short, Form B2, ref 4100.0100 1 ESX-25 collet holder, Form E3 with EX25 nut and Ø 5 mm collet 1 same, without EX25 nut 3 tapping collets Ø 4.5–6 and 8 mm 1 indexable insert drill holder, Ø 40 mm bore, Form E1, ref 4100.00124 1 same, Ø 32 mm bore, ref 4100.00107 1 same, Ø 20 mm bore, ref 4100.00105 1 boring bar holder Ø 8 mm, Form E2, ref 4100.00108 1 same, Ø 10 mm, ref 4100.0109 1 same, Ø 12 mm, ref 4100.0110 2 same, Ø 16 mm, ref 4100.0111 1 same, Ø 20 mm, ref 4100.0112 1 same, Ø 25 mm, ref 4100.0113 1 same, Ø 32 mm, ref 4100.0115 1 same, Ø 32 mm, GARANT, long 5 steel protection plugs, Form Z2, ref 4100.00130 1 left axial toolholder, Force C4, ref 4100.00103 1 pneumatically controlled tailstock support, CM 5, ref 180-65.200 1 stand only for microscope, ref 180-60.005 1 coolant device OPTIONAL ACCESSORY 1 hinged steady rest with 3 jaws for Ø 30–120 mm, ref 180-70.200 chf. 2,500.-- + VAT Subject to errors or omissions, the technical information is provided without obligation.

Kondisi: sangat baik (bekas), Data Teknis: lebar potong maks.: 3100 mm kapasitas potong maks. untuk baja ST45: 0,4 – 10 mm garis pembatas paralel yang disesuaikan secara motoris: 1000 mm Kontrol NC: OPERATOR Dcodpfeyxvgqjx Aavjp Stroke: 160 mm Daya motor: 15 kW Tanda CE Dimensi (Panjang x Lebar x Tinggi): sekitar 3900 x 2200 x 2250 mm Berat: sekitar 9 ton Penjual tidak bertanggung jawab atas kesalahan penulisan atau pengiriman data. Kondisi mesin secara visual, teknis, dan tingkat keausan sesuai dengan usianya; mesin bekas dijual tanpa jaminan apa pun.

Kondisi: baru, Tahun pembuatan: 2026, Build size: 4 Nominal heat output: 116 kW -- BImSchV Stage 2 and CE compliant -- Combustion chamber fully lined with fireclay Suitable for rooms up to: 2,900 m³ (according to DIN) Fuel: firewood, chipboard, wood chips, briquettes Fuel consumption: 30 - 35 kg/h Fan air output, free-blowing: 7,500 m³/h Dcedodlhcdspfx Aavop Air outlet opening: Ø 600 mm Flue connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 Volt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya punching: 31 t, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.525 mm, berat keseluruhan: 21.000 kg, beban meja: 160 kg, produsen pengendali: FANUC, jumlah sumbu: 2, This AMADA EMZ 3610 NT CNC punch press was manufactured in 2011. It is equipped with a Fanuc control, offers a punching force of 300 kN, and features a working area of 2500 x 1525 mm, which can be extended to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking for a high-quality punching machine, consider the AMADA EMZ 3610 NT, which we are offering for sale. Please contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4.5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0.1 mm • Z-turret stations: 45 • Auto-index stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 rpm • Max. hits per minute: 1000 • Machine frame: bridge frame • Punch drive: servo-electric twin drive • Drives (turret + table): AC servo motors • Clamps: pneumatic • Electrical connection: 400V / 50Hz • Power consumption: 1 kW - 7 kW • Air consumption (machine): 250 l/min • Air consumption (air jet vacuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0.5 - 8.0 mm • Max. loading weight: 300 kg • Max. stacking height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. Traverse speed: 70 m/min • Number of suction cups: 34 pcs • Double sheet detection: Yes, with sheet thickness monitoring • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with part remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0.5 - 3.0 mm (4 mm for EM series) • Max. part weight: 50 kg • Sorting table size: 3400 x 1400 mm • Max. part size for removal clamps: 3000 x 1500 mm • Max. skeleton table stacking height: 450 mm • Max. skeleton table weight: 2000 kg • Max. storage table stacking height: 450 mm • Max. storage table weight: 4000 kg Dcjdpfx Aaox D Hpqovep • Max. traverse speed X-/Y-axis: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar input pressure • Electrical connection: 400V

Kondisi: baru, Tahun pembuatan: 2025, Working width: 380 mm Working height: 250 mm 1st unit, rotor assembly: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush powered by a 1.5 kW motor, variable drive 2nd unit, rotor assembly: Group of 2 oscillating rotary brushes, Ø 200 mm, each brush powered by a 1.5 kW motor, variable drive Oscillation for both units: yes Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 1 - 6 m/min Feed motor power: 0.37 kW Vacuum conveyor: yes Machine length: 1400 mm Dcjdpfov R U Ifsx Aavsp Machine width: 900 mm Weight: 500 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.000 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 2.200 mm, panjang total: 3.550 mm, lebar total: 2.000 mm, berat keseluruhan: 870 kg, panjang penggilingan: 1.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 3.550 mm, lebar yang dibutuhkan: 2.000 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide Belt Sander MS92-150 – 3-Roller Deflection, Belt Size 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electrically operated table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration Dcsdpstwb U Asfx Aavep - CE-compliant design The rigid machine frame, constructed of welded steel, ensures extremely smooth operation. Both machine bases are designed with an offset to enable grinding of workpieces longer than the machine table itself. The grinding belt is guided by three deflection rollers, providing the operator with an exceptionally open and accessible workspace, ideal especially for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Belt tension is pneumatically adjustable. The dust collection device is dimensioned to efficiently capture grinding dust and direct it to the extraction port when connected to a suitable extraction system. To allow for fatigue-free operation, the grinding unit runs in play-free, precise roller guides. The machine table can be quickly and easily adjusted to the appropriate workpiece height via the electrical table lift. The table lift guide components are maintenance-free. For loading, the table can be extended sufficiently so that workpieces can be placed without the need to slide them under the grinding belt. All main electrical controls are centrally located for user-friendly operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in “light grey” The standard machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and tilting workpieces. The handling system is mounted centrally beneath the infeed frame. To operate the handling system, the infeed frame is removed from the machine table. The handling system is equipped with four vacuum suction cups to hold workpieces and consists of: A bearing with a rotation axis featuring a brake disc at the rear. At the front of the rotation axis, a tilting device is mounted, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the tilting head allows for fine adjustment of the workpiece to the sanding belt. The release of the rotation and tilt axes is pneumatically controlled by foot switch, while manual movement of the axes is required. Maximum permissible workpiece weight: as flat table with infeed frame = 80 daN; when using the handling device (on the clamping plate) = 25 daN or 120 Nm (relative to axis center).

Tahun pembuatan: 2005, jam operasional: 14.300 h, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.270 mm, produsen pengendali: AMADA, model controller: AMNC-F (FANUC 180i-PB), berat keseluruhan: 18.000 kg, tinggi total: 2.318 mm, gaya punching: 20 t, panjang produk (maks.): 5.526 mm, ketebalan lembaran (maks.): 3 mm, lebar meja: 5.120 mm, jumlah sumbu: 5, This 5-axis AMADA EM 2510NT turret punching machine was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine offers a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking for a high-quality punching machine, consider the AMADA EM 2510NT we have available for sale. Please contact us for further details. Dcsdpfxjy S A Tko Aavsp • Rapid traverse X-axis: 100 m/min • Rapid traverse Y-axis: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute—1 mm pitch (5 mm stroke): 780 hits/minute • Hits per minute—25.4 mm pitch, X-axis: 500 hits/minute • Hits per minute—25.4 mm pitch, Y-axis: 330 hits/minute • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption—machine: 250 l/min • Air consumption—air jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling as visible in the photos included • 4 tool cabinets • Technical documentation (manual scan) • Machine plus supplied tooling package as shown in the photos • Machine fully functional: Yes (replacement of a pneumatic hose required to fix a minor air leak) • Machine connected to power supply: Yes

Kondisi: bekas, Tahun pembuatan: 2000, Lebar pelat 3020 mm Ketebalan pelat 5 mm Jarak antara penyangga 3020 mm Sistem kendali Simatec OP7 Langkah 450 mm Penyangga belakang – dapat disesuaikan 2000 mm Tinggi kerja 900 mm Total kebutuhan daya 22 kW Berat mesin sekitar 9000 kg Ruang yang dibutuhkan sekitar 4200 x 1600/2900 x 2000 mm Perlengkapan: - penyangga belakang bermotor, 2000 mm - penyetelan palang atas hidraulik - penyetelan palang bawah bermotor - penjepit perkakas hidraulik Dcsdeyk Dicepfx Aavsp - pelindung samping - sakelar kaki - buku petunjuk pengoperasian