MESIN PENGALIH RADIAL

BRACKER RN 280

Kondisi: baik (bekas), 1 x drilling and tapping machine Wörner BG 16 with pneumatic feed (manual drilling also possible) Dsdpeipyiwefx Abhskh coolant system Technical data: Spindle speeds: 95 - 3,500 rpm (24 steps via V-belt, 2 via motor) Spindle taper: MT 2 Drilling capacity in steel: 16 mm Tapping capacity in steel: M 8 The machine can be inspected under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.700 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (min.): 6.000 rpm, lebar meja: 1.100 mm, panjang meja: 4.200 mm, kecepatan rotasi (maks.): 6.000 rpm, Kontrol Heidenhain iTNC 530 Dodpow Ngd Tofx Abhokh Penukar alat untuk 60 alat Kepala universal otomatis, 0,02 derajat pada kedua sumbu Mesin akan direkondisi pada tahun 2025

Kondisi: bekas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending of sheet metal seams For producing a seam bend Dkjdpfsdzqblsx Abhjh Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. The folding produces a rounded edge that reduces the risk of injury from cuts on the sharp sheet edges. Ideal for sheet metal processing in furniture manufacturing, cladding panels, or for ventilation and silencer construction.

Kondisi: sangat baik (bekas), Offered is a used solid matter pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Dkedpfxehwnfco Abhjh

Kondisi: baik (bekas), Tahun pembuatan: 2008, Dalam kondisi teknis yang baik dan sepenuhnya berfungsi. Tahun pembuatan 2008. Dedexdcigjpfx Abhokh Sumbu Y tambahan ±60 mm Kecepatan putar spindel maksimum 3.000 rpm Daya motor spindel 22/18,5 kW Kecepatan maksimum alat penggerak 6.000 rpm - Chuck 300 mm dengan lubang tembus 90 mm, kepala spindel A2-8 - Daya dan torsi meningkat 25/30 kW, 1.000/1.300 Nm - Diameter pembubutan 420-500 mm - Panjang pembubutan 1.250 mm - Sumbu C, alat penggerak - Tailstock NC, sepenuhnya dapat diprogram, motor terpisah - Daya sumbu Z ditingkatkan - Konveyor serbuk baru

Kondisi: bekas, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.800 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 4.500 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, X-AXIS TRAVEL 6000 MM Y-AXIS TRAVEL 1800 MM Z-AXIS TRAVEL 1000 MM WORKTABLE 7300 X 1090 X H 900 MM Dkjdpjv H D Exofx Abheh SPINDLE NOSE MOUNT ISO 50 SPINDLE SPEED 0 - 4500 RPM AUTOMATIC INDEXING HEAD 2.5° X 2.5° CNC SELCA 3045 PD EXTERNAL AND INTERNAL HIGH-PRESSURE COOLING TOOL CHANGER WITH 60 POSITIONS NO. 01 CNC-CONTROLLED DIVIDING HEAD

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1999, berat keseluruhan: 22.800 kg, gaya penekanan: 250 t, CNC press brake Manufacturer: Weinbrenner Model: GP250 Machine specifications: - Crowning system - Die shifting - Rear stop type 2 - Front bending aid (disassembled for transport) - DNC 900PS CNC control All documentation for the machine is available. Dedjr Sxq Repfx Abhjkh

Kondisi: bekas, Tahun pembuatan: 2001, Technical Details: Tube diameter: 74 mm Wall thickness: 5 mm Tube diameter min.: 10 mm Tube diameter max.: 74 mm Round material: Steel max.: 40 mm Control: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max: 300 / min: 65 mm Maximum bending angle: max: 195° / min: 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube feed length: 3000 mm Hydraulic working pressure: max. operating pressure: 300 bar Total power requirement: 43 kVA Machine weight approx.: 8.5 t Machine dimensions approx. LxWxH: 6.5 x 1.6 x 1.6 m Dkodpfx Aeu Ibvhjbhoh Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine featuring a bending head and pivoting arm (cold bending machine). Fields of application: exclusively for processing tubes, round bars, and wires made of steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level adjustment: vertical travel = 300 mm (vert. position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached as required. Bending direction is to the right. Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic power unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec. and max. acceleration 1100 mm/sec.) ID. *

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. Dsdopugwiopfx Abhokh The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW Dksdpfx Abslnkc Uehjh - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders