Pukulan baris hidrolik

Braun Verfahrweg 1000 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2014, daya laser: 3.000 W, en-GB Pedpfx Ajwld Susb Ijrd

Kondisi: baik (bekas), Tahun pembuatan: 2024, Welding positioner KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via geared motor from 0 to 90° Speed: 0.3 – 2.5 rpm Incl. foot remote control Psdebvk I Espfx Ab Isrd Additional cost: Quick-change chuck Diameter 300 mm, €450

Kondisi: bekas, Pipe bending machine, mandrel bending machine, bending machine for tubes and profiles Pipe bending unit with SIEMENS servo motor and planetary gearbox Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gearbox - 2-piece bending tool opens and closes by means of hydraulic lifting motion - MERKLE hydraulics - round block cylinder, type 014445, for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control unit - Without hydraulic power pack Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Pjdod E A I Iopfx Ab Iord Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-handed configuration available. 5 units in left-handed configuration available. The stated price refers to 1 bending unit with servo motor. On request, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. Hydraulic power packs are also available.

Kondisi: baru, CATALOG NUMBER M0261 TECHNICAL DATA Number of spindles: 21 Distance between the first and last drill: 640 mm Center distance between individual spindles: 32 mm Max workpiece size: 50 x 915 x 3000 mm Max drilling depth: 65 mm Number of pneumatic clamps: 2 Height of drill's worktable: 860 mm Max clamp height above worktable: 70 mm Operating pressure: 6-7 bar Air consumption: 10 l/cycle Motor power: 1.5 kW Noise level: 76.1 dB Spindle speed: 2800 rpm Dimensions (L/W/H): 1030/1030/1285 mm Weight: 275 kg PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling within a 0 - 90° range - Head tilt angle adjustable pneumatically - Cast iron fences - Spindles adapted for quick couplings - Patented pneumatic material clamps - Cast iron worktable - Fast and precise adjustment - Precision drilling - Italian production Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left) with two stops each - 5 quick couplers - Wooden crate securing the machine during transport ADVANTAGES - Drilling vertically/horizontally/at an angle - Multi-spindle - Brand new machine - CE certificate - Sturdy - Professional Net price: PLN 16,400 Net price: EUR 3,950 Pjdedpcflopfx Ab Ijrd Net price calculated at an exchange rate of PLN 4.15/EUR (price may change with significant exchange rate fluctuations) - We ship machines to any corner of the country - Possibility to trade-in another machine The prices given are net prices. Net prices listed for international transactions, EU customers with valid EU VAT number. Before placing an order for a new product, please confirm availability and current price.

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Predpfogwt S Tsx Ab Isd Plantec Maschinen GmbH

Kondisi: baru, Airtower FT 20,000 model designation Prjdpfsgvqzcox Ab Isd

Tahun pembuatan: 1965, Kondisi: bekas, Pressing force 150 t Throat depth 550 mm Stroke 10 - 140 mm Table surface 1180 x 980 mm Strokes per minute 40 spm Shut height 500 mm Ram surface 1040 x 800 mm Ram adjustment 70 - 150 mm Bore hole (depth x diameter) 435 x 55 mm Power requirement 15 kW Machine weight approx. 12 t Space requirement approx. 3 x 1.7 x 3 m - with auxiliary brake Predpfx Ascubatsb Iod - ram weight compensation - motorized ram adjustment - central grease lubrication (manual) - rupture disc - clamping plate - safe for manual loading/unloading - operating manual available

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Predpfxeb Tdqus Ab Ijd Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t

Kondisi: diremajakan ulang (bekas), Fungsionalitas: fungsi terbatas, Tahun pembuatan: 2003, jam operasional: 24.000 h, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 4.100 mm, Sudut pembengkokan (maks.): 183 °, radius pembengkokan (maks.): 300 mm, ketebalan dinding: 8 mm, de-Transfluid DB 2090 DB CNC Dornbiegemaschine für Rohre. Hochwertige deutsche Maschine in exzellentem Zustand, die Haupt-Hydraulikpumpen wurden komplett generalüberholt und der Hauptkopf vollständig instand gesetzt. Es muss lediglich ein neuer Encoder installiert werden, dann ist die Maschine betriebsbereit. Ausstattung: - Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Prsdpfx Astrd T Tjb Iod - Vorzeitiger Dornrückzug - Vollautomatische Einstellung der Spannbacken und Mitnehmer - Verstärkter Mitnehmer für enge Radien bei dünnwandigen Rohren - Lange Aufspannlänge mit 4000 mm Überdorn Im Lieferumfang ist umfangreiches Werkzeug im Wert von über 150.000 AUD enthalten: - 101,6 mm - 152 mm CLR - 101,6 mm - 200 mm CLR - 76,2 mm - 114 mm CLR - 76,2 mm - 200 mm CLR - 76,2 mm - 238 mm CLR - 63,5 mm - 96 mm CLR - 57,2 mm - 86 mm CLR - 50,8 mm - 76 mm CLR - 44,5 mm - 67 mm CLR - 40 x 40 mm - 120 mm CLR - 50 x 50 mm - 150 mm CLR - 60,3 mm - 150 mm CLR - 48,3 mm - 120 mm CLR

Tahun pembuatan: 2021, Kondisi: baru, - 4 rolls Pedpfjgg N R Hex Ab Isrd - Capacity 1570 x 9 - Hardened rollers - Top roller diameter: 200 mm - Bottom roller diameter: 200 mm - Side roller diameter: 180 mm - Hydraulic system - Digital display for left roller movement - Digital display for central lower roller movement - Digital display for right roller movement - Top roller hydraulically foldable - Steel construction ST-52 - Hydraulic drop-end for easy roller positioning - Hydraulic up and down movement system with central and side rollers - Hydraulic balancing system - Overvoltage protection - Documentation - 400V