Pengeboran mesin radial

BREDA R 60-2000

Kondisi: baik (bekas), Leit and lead screw lathe Matra SM-3000 Country of origin: Spain Swing over bed: 600 mm Swing over cross slide: 370 mm Turning length: 3,000 mm Swing in gap: 900 mm Gap length: 280 mm Spindle bore: 72 mm Speed range: 17–1,652 rpm Number of spindle speeds: 36 Main motor power: 9/11 kW Rapid traverse longitudinal/cross Tailstock: Morse taper 5 Nedpjvq I Npefx Aaholk Machine weight: approx. 4 t Dimensions (LxW): approx. 4,800x1,300 mm Equipment/Accessories: - Fixed steady rest with rollers / max. workpiece diameter 220 mm - Coolant system - Bed stop - Röhm 3-jaw chuck, diameter 500 mm - 2-axis SINO digital readout - Multifix C toolpost base holder The machine is in very good, fully operational condition. Net price ex works, loaded from stock.

Tahun pembuatan: 2007, Kondisi: bekas, Wheel diameter – max. 400 mm Wheel width – mm Module – max. – Workpiece diameter 36-300/400 mm Center distance 135-290 mm Spindle speeds – infinitely variable 3000 rpm Centre distance 100-550 mm Control system Machine weight approx. 4,000 kg Space requirements approx. 2000 x 3055 x 2788 mm CNC control Siemens 840 D Test procedures: - Single flank rolling test - Double flank rolling test Nodpfx Aajgr Harjhelk - Structure-borne noise test - Heli-test under double flank contact Features: - Operation with up to 6 test slides - Maximum test accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (Type: Vogel) - Oil mist extraction (Type: Elbaron)

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Nsdpjd Hl Stjfx Aahelk Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1977, Pressing force 250 t Upright distance 1,120 mm Nledpex Ug Dsfx Aahsk Stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface 1,100 x 900 mm Table height above floor 950 mm Lateral upright clearance 700 mm Ram surface 1,100 x 900 mm Speed down mm/s Speed up mm/s Working speed mm/s Oil capacity 730 l Drive power 56 kW Weight 25 t Space requirements (WxDxH) 2.3 x 1.55 x 3.96 m Additional Information with electro-hydraulic drive, hydraulic (20) and electrical control system according to UVV, light curtain (Sick), upper and lower stroke limit, pressure- and travel-dependent controllable, cut shock absorber, short-stroke control, new control (Mitsubishi), safety control (PNOZ Multi), screen control with touch screen, control cabinet

Kondisi: sangat baik (bekas), Eksekusi spindel ganda dengan poros C, dengan poros Y Kontrol MAZAK Mazatrol Nexus Panjang pembubutan - 538 mm Diameter lintasan - 675 mm Diameter pembubutan 380 mm Kecepatan spindel 35-5.000 + 35-6.000 rpm Majalah alat dengan 16 posisi bertenaga Pemasok batang Perangkat pra-set alat Njdpfx Aaexpugbsholk Perangkat penangkap bagian Berbagai aksesori MARCELS MASCHINEN CH

Kondisi: baik (bekas),

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, gores kuas bulu: 35 mm, kecepatan spindle penggilingan: 1.670 rpm, berat keseluruhan: 4.000 kg,

Tahun pembuatan: 2002, Kondisi: baik (bekas), nomor mesin/kendaraan: SIKBK, Demag KBK crane runway approximately 10x6 m Load capacity / lifting capacity: 500 kg (0.5 t) Technical data of the system: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable trolley, brackets/suspensions, etc. Including Demag DK2 500 kg electric chain hoist Crane is dismantled and immediately available Nodpemqf Nbofx Aahslk Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection by appointment only Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 kg to 1600 kg. Please inquire about your crane runway with desired cantilever and dimensions.

Kondisi: bekas, Tahun pembuatan: 1997, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,000 mm Max. workpiece height: 1,250 mm Nsdpfxol Ha Two Aahslk Table size: 1,150 x 690 mm Spindle taper: MT 4 Spindle speeds: 40 - 1,400 rpm Feed range: 0.08 - 0.40 mm/min Horizontal arm travel: 800 mm Vertical arm travel: 700 mm Spindle stroke: 220 mm Drive power: 3.5 kW Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight approx. 1.6 t - Factory No.: A01/446/97 - Adjustable cube table 600 x 500 x 500 mm - Coolant device - Machine lamp

Kondisi: bekas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Nlsdpfxju Ix H Dj Aahjk Workpiece height (max.): 2,500 mm Control system: Sinumerik 840D SL X-axis stroke/ram slide: 300 mm X-axis stroke/ram travel: 2,850 mm X-axis working travel without tool: 2,850 mm X-axis working travel with tool changer: 5,000 mm W-axis (crossrail elevation travel): 1,800 mm Tool station/positions: 12 Tool holder interface: HSK 100 (spindle) Workpiece weight capacity: 100 t Table speed: 1 - 50 rpm T-slots: 8 units (36 H12) Ram milling speed: 4,000 rpm Rapid traverse in X and Z axes: 8,000 mm/min Torque for milling: 100,000 Nm Torque for turning: 200,000 Nm Total power requirement: 80 (2x40) kW Approximate machine weight: 140 t Approximate machine dimensions (LxWxH): 11.5 x 6.6 x 8.4 m CNC vertical turning lathe – NEW (The machine pictured is a demonstration model) Application of manufacturing processes: Turning processes, such as external longitudinal turning, internal and external face turning, and profile machining. Grooving operations both internal and external. Drilling, including short-hole and deep-hole drilling. Milling operations, such as face, corner, profile, and T-slot milling. Thread cutting. Also suitable for roughing and end machining. The machine bed, engineered as a welded construction, absorbs extreme cutting forces. The table is made from high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. In addition, the table is equipped with hydrodynamic workpiece support. Additional features: - Automatic tool changer - Chuck with 8 jaws, power-actuated spindle, and hardened jaws - Including 40 bar coolant system with filtration unit - Hydraulic and lubrication systems by ATOS and Dropsa - Equipped with Heidenhain axis measuring system - Renishaw - NEW – with warranty & service via WMW AG