Beli Pengeboran Mesin Radial bekas (78.771)

Kondisi: baik (bekas), Kapasitas pengeboran pada baja (diameter): 80 mm Kapasitas pembentukan ulir pada baja: M 80 x 4 mm Jangkauan: sekitar 500/2500 mm Jarak minimum/maksimum antara permukaan pemasangan dan spindel pengeboran: 650/2300 mm Langkah spindel: 500 mm Luas permukaan penjepitan meja: 1250 x 2800 mm Kecepatan spindel: 9 – 1800 rpm Hfjdeg A Inwepfx Aa Hsl Kecepatan umpan: sekitar 2 – 1250 mm Penggerak spindel: 7,5 kW Berat: 12.000 kg Kebutuhan ruang: 4000 x 1280 x 4100 mm

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel: 28 mm - Thread cutting device Hfodpob Ennkefx Aa Hol - Drill spindle mount: MT 3 - Drill spindle stroke: 160 mm - Table dimensions approx. 750 x 500 mm - Arm reach up to approx. 620 mm - Vertical travel of the arm: 600 mm - Column diameter: 250 mm - Spindle speeds in 12 steps: 80 – 2800 rpm - 3 feeds: 0.1 / 0.15 / 0.25 mm/rev - Drill spindle drive: 400 V / 5.5 kW - Coolant system - Space requirement: approx. W 1100 x H 1550–2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Tahun pembuatan: 1963, Kondisi: bekas, Radial drilling machine, drill press, cantilever drilling machine, universal drilling machine, milling machine - Arm reach: 645 mm - Taper: MT3 - Spindle speeds: 95 - 1050 rpm - Column diameter: Ø 190 mm Hfjdpfx Aodvnbxoa Hjl - Spindle stroke: 195 mm - Automatic feed: 0.05/0.10/0.20 mm/rev - Clamping table: 735 x 520 mm - Dimensions: 1350/705/H2170 mm - Weight: 1100 kg

Tahun pembuatan: 1973, Kondisi: bekas, Drilling capacity in steel (diameter): 32 mm Throat depth: 410 - 1000 mm Workpiece height - max.: 765 mm Coolant system: yes Drill spindle diameter: 38 mm Quill diameter: 70 mm Spindle stroke: 225 mm Drill spindle taper: MK 4 Spindle speeds - stepless: 70 - 2000 rpm Feed range - spindle: 0.04 - 0.32 mm/rev Column diameter: 225 mm Hfodsgmu A Sepfx Aa Hjl Drill radius max./min.: max. 1130 mm Table clamping surface: 630 x 1320 mm Height adjustment: 500 mm Base plate: 1500 x 1000 mm T-slots: 4 pieces T-slot spacing: 18 mm Total power requirement: 2.2 kW Machine weight approx.: 1.8 t Space requirement approx.: – Support travel: 590 mm Without rotary table, without tools

Kondisi: hampir baru (bekas), Tahun pembuatan: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Spindle: MT4 Hfodpfog I I Ekox Aa Hjl Spindle speeds: (12) 45-2000 RPM Drill head travel: 350-1250mm Distance spindle to base plate: 350-1420mm

Kondisi: bekas, Tahun pembuatan: 1990, Kapasitas pengeboran pada baja (diameter) 35 mm Hfodpez Aunxsfx Aa Hol Langkah sumbu-X 450 mm Langkah sumbu-Y 250 mm Langkah sumbu-Z 500 mm Digital: ya Dimensi (panjang/lebar/tinggi) 1,2 / 1,1 / 1,95 mm Diameter ulir maks. 24 mm Berat mesin sekitar 800 kg

Kondisi: baik (bekas), Tahun pembuatan: 1996, Mesin bor radial tipe Reform RB50x12 dijual dalam kondisi baik. Kapasitas: Maks. 50mm pada baja. Panjang lengan: 1250mm Jarak poros ke kolom minimal: 350mm Hfodpfx Aaexftk Re Hsl Taper: MK5 Langkah: 315mm Kecepatan spindle: 25 – 2000 rpm, 16 tingkat Kecepatan makan: 0,04-3,2 mm/putaran Motor utama: 3kW Berat: 3000kg Dimensi: 2150x1060x2840mm Mesin penjepit secara hidrolik, dilengkapi dengan tombol pemberhentian darurat. Mesin dalam kondisi hidup di gudang kami.

Kondisi: bekas, Tahun pembuatan: 1988, Dalmastroj BRB-3 mesin bor radial cepat konvensional Kondisi: Bekas Tahun pembuatan: 1988 Data teknis: Kapasitas pengeboran pada baja: Ø 30 mm Jarak lengan: 430 - 1000 mm Diameter pilar: 200 mm Tinggi benda kerja: 500 mm Sambungan spindel bor: MK 4 Rentang kecepatan: 100 hingga 1120 rpm (8 langkah) Kepala mesin dapat diputar: 360° Hfsdpfx Aaozhualj Hsl Daya motor: 1,4 / 1,8 kW Tegangan: 400 V Berat mesin: sekitar 2100 kg termasuk aksesoris Perlengkapan: - Kaki pendingin dengan pompa - Perangkat pemotong ulir - Batas kedalaman bor - Chuck bor

Kondisi: baik (bekas), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions (LxWxH), approx.: 700 x 520 x 520 mm Hfsdpfed Tticox Aa Hel Weight, approx.: 280 kg Article no.: WW12214

Kondisi: baru, Mesin bor radial dengan penjepit hidrolik dan perlengkapan pemotongan ulir. Data Teknis: Kapasitas pengeboran baja Ø: 50 mm Kapasitas pengeboran besi cor Ø: 60 mm Pemotongan ulir baja Ø: 40 mm Pemotongan ulir besi cor Ø: 50 mm Diameter kolom: 320 mm Jangkauan (Min/Maks): 330 - 1650 mm Langkah perjalanan kepala spindel (horizontal): 1320 mm Jarak ujung spindel - pelat dasar (Min/Maks): 465 - 1405 mm Ketinggian perjalanan lengan: 670 mm Luas permukaan penjepitan meja persegi: 630 x 500 x 500 mm Ukuran pelat dasar: 2550 x 970 x 200 mm Dudukan spindel: MK 5 Langkah spindel: 270 mm Kecepatan putaran: (12) 37 - 1253 putaran/menit Umpan: (3) 0,06 / 0,10 / 0,20 mm/putaran Daya motor, perkiraan: 3,7 kW Tinggi total Maks.: 2790 mm Berat, perkiraan: 3300 kg Hjdpfsuxrtfsx Aa Hjfl Fitur: - Pengoperasian sederhana dengan satu tombol dengan sirkuit terintegrasi untuk melepaskan gerakan lengan ayun secara otomatis, berhenti otomatis, dan penjepitan otomatis. - Lengan ayun dan kepala bor dengan penjepitan hidrolik independen - Pengaman pengangkat khusus mencegah lengan jatuh secara tiba-tiba atau bergerak sendiri, bahkan setelah penggunaan yang lama dan keausan yang sesuai. Pengaman ini melindungi operator dari cedera, bahkan jika mur ulir sangat aus. - Kolom, lengan, dan roda gigi dapat dijepit secara bersamaan dengan menekan tombol. Perlengkapan standar: - Perlengkapan pemotongan ulir - Perlengkapan pendingin termasuk pompa - Lampu mesin - Meja persegi 635 x 520 x 420 mm - Peralatan pengoperasian dalam kotak - Buku petunjuk dan daftar suku cadang - Pelindung spindel - CE

Kondisi: baru, Special promotional price for in-stock items! Only while stocks last! Price net ex works, loaded free on truck. The machine is supplied without base frame. Base frame BF3 Deluxe is available separately under item no. 56-1017. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Max. shell end mill: 80 mm Throat: 220 mm Spindle speed (12): 75 - 3200 rpm Spindle taper: MT 4 Quill stroke: 125 mm Table size: 800 x 240 mm Travel (x / y): 555 / 225 mm Milling head swivels: -90° to +90° Distance spindle / table: 60 - 485 mm Milling head height adjustment: 425 mm Hjdpfxodh Hbcs Aa Hsfl T-slot size: 14 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H)*: 1140 x 770 x 1500 mm Approx. weight: 287 kg * without base frame Features: - Quick and easy speed change with gear selector switch - Versatile applications: drilling, milling, tapping, etc. - High running smoothness thanks to precision-ground, oil-bath lubricated gears - Forward and reverse operation for tapping - Quill adjustment via lever, fine feed via handwheel - Dovetail guides for x-, y-, and z-axis, adjustable via gib strips - Milling head swivels to both sides for angle drilling, bevel milling, etc. - Large, heavy-duty cross table, precision-machined surface - Excellent price-performance ratio for cost-conscious users Scope of delivery: Keyless drill chuck 3 - 16 mm / B 16 Drill chuck arbor MT 4 / B 16 Drawbar M 16 Reducing sleeve MT 4 / 3 Combined shell mill arbor MT 4 / 27 mm Height-adjustable safety guard Tapping device LED machine lamp Digital quill stroke display Lamellar safety guard Longitudinal measuring scale Operating tools

Kondisi: baru, translation_001 Hsdpfx Asp Atipoa Hsfl

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Bor Merek: GSP Tipe: 407C22 Jangkauan: 2250 mm Kapasitas pengeboran (baja): - Maju normal: diameter 70 mm - Maju lambat: diameter 90 mm Jarak gerak carriage pada lengan: 1900 mm Radius pengeboran (min. - maks.): 630 - 2500 mm Tinggi (min. - maks.): 500 - 1750 mm Gerak vertikal lengan: 850 mm Gerak spindle: 400 mm Kecepatan spindle: 25 hingga 1400 rpm Hfodoy D Hr Uopfx Aa Hel Daya motor: 6 kW Kepala spindle: MT 5

Kondisi: bekas, Tahun pembuatan: 1988, Mesin bor radial Produsen: Tai Pin Tipe: TPR 1230 Tahun pembuatan: 1988 Kapasitas pengeboran pada baja: Ø 42 mm Hodpjznvibefx Aa Hsfl Kapasitas pengeboran pada besi cor: Ø 55 mm Pembuatan ulir (baja/besi cor): M25 / M38 Jangkauan (dari tiang hingga tengah spindel): 330 – 1.230 mm Langkah pergerakan kepala spindel: 880 mm Diameter tiang: 300 mm Pemasangan alat: MK 4 (Kerucut Morse 4) Langkah pena (langkah spindel): 270 mm Kecepatan spindel: 12 tingkat, 37 – 1.253 RPM (pada 50 Hz) Umpan otomatis: 3 tingkat (0,05 / 0,09 / 0,15 mm/putaran) Jarak spindel – pelat dasar: 467 – 1.360 mm Pengaturan ketinggian lengan: 620 mm 9926ä

Kondisi: bekas, nomor mesin/kendaraan: 006158, Maximum panel width: 1000 mm Maximum panel length: 2500 mm Number of injectors: 14 Positioning via NC control: yes Hfedpfx Aajiwptue Hol

Kondisi: baik (bekas), Tahun pembuatan: 1995, Bor mesin radial bekas merek Foradia Hfodpfx Aaoytb Eys Hol Tipe: GR 50 1200 Jangkauan: 1200 mm Diameter bor hingga: 50 mm Tahun pembuatan: 1995.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Mesin Bor Radial Cepat Donau Flex 135 Produsen: Donau Tipe: Mesin Bor Radial Cepat Flex 135 Kondisi: bekas, sangat baik hingga seperti baru Tahun Pembuatan: 2020 Pengaturan kecepatan tanpa langkah Pengumpanan spindel tanpa langkah Peralatan pemotongan ulir Dimensi dan jarak tempuh Dudukan perkakas MK 4 Diameter kolom mm 170 Dimensi meja mm 1200 x 600 Jumlah alur-T 4 Jarak alur-T mm 125 Langkah spindel mm 165 Langkah kolom mm 450 Kapasitas pengeboran pada baja padat 60 mm 35 Hfsdpfx Aaszza Nxj Hsl Pada baja cor 22 mm 42 Pemotongan ulir baja padat 60 M 30 Pada baja cor 22 M 36 Motor AC, dikendalikan frekuensi kW 4,0 pada 100% ED. Rentang kecepatan: min-1 20 – 3200 Pengumpanan tanpa langkah mm/putaran. 0,02 – 0,7 Lampu mesin Pelindung spindel

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1,050 mm Spindle speed: 15 – 2,800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions (L x W x H): 2,450 x 1,300 x 2,300 mm Weight: 1,500 kg Equipment: • Machine in top condition • Serviced and overhauled by factory customer service in 2026 Machine Features: • Worktable 1,800 x 600 mm with 4 T-slots • Arm travel: 1,050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 x 18 mm T-slots at the rear of machine base • 2 x 18 mm T-slots on the left side of machine base • Thread cutting device • Centralized lubrication • Coolant system Hodpfx Aaoy Nd T Ho Hsfl • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min./max. (to table): 70 / 680 mm Distance spindle nose – min./max. (to floor): 970 / 1,580 mm Drilling radius: 540 – 1,590 mm Worktable height: 900 mm Machining Values Drilling capacity (solid material): - St 60: Ø 40 mm - GG 22: Ø 50 mm Thread cutting: - St 60: M36 - GG 22: M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Max. torque: 250 Nm, constant from 15 – 2,000 rpm Feed Drives X-axis: AC servo motor 0.25 kW Y-axis: AC servo motor 0.25 kW Z-axis: AC servo motor 4.5 kW W-axis: AC servo motor 2.5 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axis over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1,800 x 600 mm table): 2,800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: Backlit TFT flat screen, easily readable from all angles, 215 x 160 mm Position displays: Cartesian or polar, values absolute or incremental, units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data proposals Tool management: max. 500 tools Subprogram technology: yes Standard software options: dialog programming, 38 zero point offsets, rotate and mirror, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - alignment of cast and flame-cut parts - angular position detection for round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: baru, Drilling capacity in steel (diameter) 40.0 mm Thread cutting M30 Workpiece height – max. 380 – 785 mm Arm outreach 985 mm Spindle taper 4 MT Drill head swivels right/left -80 / +80 degrees Table surface 1210 x 520 mm Speed range 50 – 2000 rpm Column diameter 220 mm Table surface 1210 x 510 mm Quill stroke 200 mm Feed range – spindle 0.08 – 0.50 mm/rev Total power requirement 2.2 kW Machine weight approx. 2800 kg Space requirements approx. 2450 x 1200 x 2720 mm Features - Wide range of clamping and machining options due to design - Electrically driven height adjustment of the drill head without shifting the drilling position, ideal for deep hole drilling - Drill head swivels 180°, arm can be moved back and forth and swiveled horizontally - Thread cutting unit and 6 automatic drilling feeds included as standard - Large table surface (1195 x 500 mm) enables simultaneous clamping of multiple workpieces - Digital speed and drilling depth display included - Rapid drill head setup on the workpiece, clamping is hydraulic - Heavily ribbed column ensures high rigidity of the arm - Robust construction guarantees vibration-free operation Hfodpfx Aoxaadyea Hsl - Infinitely variable electronic speed regulation as standard Scope of delivery - Electromagnetic spindle feed - Digital speed indicator - Digital drilling depth indicator - Electrically operated drill head adjustment - Initial filling with Shell Tellus 46 - Quick-release drill chuck 1 – 13 mm / B16 - Drill chuck arbor MT 4 / B16 - Reducing sleeves MT 4 / 3, 4 / 2, 3 / 1 - Thread cutting device - LED machine lamp - Coolant system - Height-adjustable safety guard

Kondisi: baru, Drilling capacity in steel (diameter): 60.0 mm Arm reach: 350 - 1,600 mm Workpiece height – max.: 665 x 1,250 mm Speed range: 38 – 2,000 rpm Spindle taper: MT 5 Base plate: 960 x 1,760 mm Thread cutting: M42 Quill travel: 325 mm Total power requirement: 4.0 kW Machine weight approx.: 3,800 kg Dimensions (L x W x H): 2,600 x 1,100 x 2,770 mm Features: - Standard with stepless speed adjustment - Set speed is displayed digitally - Drill spindle with high concentricity accuracy - Equipped with automatic spindle brake - Arm, drill head, and column with independent hydraulic clamping - Large dimension base plate, ideal for machining large workpieces - Thick-walled, ground column for enhanced sliding properties of the arm - Easy height adjustment of the arm via lifting motor - Spindle position remains unchanged, ideal for series production - Using push buttons, drill head and column can be clamped or released separately or simultaneously - Hardened and ground guideways on the arm - Counterbalance for quill via counterweight - Ideal for drilling, countersinking, reaming, and thread cutting Scope of delivery: - Cube table - Drill chuck arbor MT 5 / B 16 - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine light - Initial fill with Shell Tellus 46 - Coolant system - Frequency converter - Digital speed display - Lifting motor - Hydraulic motor Hsdsxaa H Uepfx Aa Hefl - Height-adjustable safety cover - Operating tools

Kondisi: baru, Drilling capacity in steel (diameter): 50.0 mm Arm reach: 320 – 1,220 mm Workpiece height – max.: 330 – 1,170 mm Spindle speed: 25 – 2,000 rpm Spindle taper: MK 5 Base plate dimensions: 1,300 x 980 mm Tapping capacity: M42 Quill stroke: 335 mm Total power requirement: 4.0 kW Machine weight approx.: 3,000 kg Dimensions (L x W x H): 2,035 x 1,000 x 2,830 mm Equipment: - Large-dimension base plate, ideal for machining large workpieces - Thick-walled, ground column for enhanced sliding properties of the arm - Arm and drill head with independent hydraulic clamping - Easy arm height adjustment via lifting motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears running in oil bath - Excellent sliding characteristics of the drill head on the arm due to ground surface Scope of delivery: - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant device - Lifting motor Hjdpfx Aasxaaabo Hsfl - Hydraulic motor - Operating tools - Height-adjustable safety guard

Kondisi: baru, Drilling capacity in steel (diameter): 50.0 mm Arm reach: 350 - 1,590 mm Workpiece height - max.: 645 - 1,240 mm Spindle speed: 25 - 2,000 rpm Spindle taper: MT 5 Base plate: 980 x 1,600 mm Tapping up to: M42 Quill stroke: 320 mm Total power requirement: 4.0 kW Machine weight approx.: 3,500 kg Dimensions (LxWxH): 2,450 x 980 x 2,840 mm Description: - Large-dimensioned base plate Hfedpfx Aaoxaad Ts Hjl - Ideal for machining large workpieces - Thick-walled, ground column for improved sliding characteristics of the arm - Arm and drill head with independent hydraulic clamping - Simple height adjustment of the arm via lifting motor - Ideal for drilling, countersinking, reaming, and tapping - Hardened and ground gears running in an oil bath - Excellent sliding properties of the drilling head on the arm due to ground surface Scope of delivery: - Cube table - Reducing sleeves MT 5/4, MT 4/3, MT 3/2 - LED machine lamp - Initial fill with Shell Tellus 46 - Coolant device - Lifting motor - Hydraulic motor - Operating tools - Height-adjustable protective cover

Kondisi: baru, Drilling capacity in steel (diameter): 32.0 mm Arm outreach: 310 - 820 mm Workpiece height - max.: 370 - 870 mm Spindle speed: 75 - 1220 rpm Spindle taper: MT 4 Base plate: 825 x 690 mm Thread cutting: M24 Quill stroke: 250 mm Quill feed: 0.1/0.16/0.25 mm/rev Travel X / Y: 500 / 510 mm Total power requirement: 2.25 kW Machine weight approx.: 1,200 kg Dimensions (L x W x H): 1470 x 750 x 2100 mm Description - Excellent sliding properties of the boom thanks to the ground surface of the outer column - Mechanical locking mechanism for the swivel movement of the boom and the spindle head travel - Easy adjustment for stationary workpieces - Simple, central operation from the front of the machine - Electric height adjustment of the swivel arm - Optimal cutting speed thanks to the wide speed range - Thread cutting via spindle reversal - Smooth operation due to robust construction Scope of delivery - Cube table - Coolant system Hjdpfx Aaexabrlj Hjfl - LED machine lamp - Lifting motor - Height-adjustable safety guard - Operating key

Kondisi: baru, Drilling capacity in steel (diameter): 13.0 mm X-travel: 300 mm Hedpfx Ajxabb Hea Hjfl Y-travel: 130 mm Spindle speed: 100 - 2500 rpm Throat: 165 mm Spindle mount: MT 3 Table size: 490 x 120 mm Cutter diameter: 30.0 mm Motor: 230 Volt Total power requirement: 0.75 kW Machine weight approx. 50 kg Required space approx. 520 x 500 x 740 mm Description: - Brushless DC motor - Provides optimal torque at low speeds - Dovetail guideways on X-, Y-, and Z-axis - Backlash-free adjustable via gib strip - Milling head swivels to both sides for angle drilling, bevel milling, etc. - Quill adjustment via lever, fine feed via handwheel - Precisely ground cross table with T-slots - Maintenance-free 500 W drive motor with smooth operation - Infinitely variable speed adjustment to suit workpiece - Independently clampable guides ensure clean milling results Scope of delivery: - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MT 3 / B 16 - Drawbar spindle M 12 - Height-adjustable safety guard - Operating tools

Kondisi: baik (bekas), Tahun pembuatan: 1955, Mesin bor radial, mesin bor, mesin bor dengan lengan -Jangkauan: 2055 mm -Jarak maksimum antara meja mesin dan dudukan spindel: 1700 mm Hfedpod Enr Isfx Aa Hsl -Dudukan kerucut: MK5 -Daya motor: 7,5 kW -Kecepatan putar: 11,2-1400 RPM -Kolom: Ø 450 mm -Langkah spindel: 540 mm -Perangkat pemotong ulir -umpan otomatis: 0,037-2,0 mm/putaran -Area penjepitan: 920 x 1600 mm -Dimensi: 2580/1110/T3450 mm -Berat: 6465 kg