Pusat permesinan dengan sumbu ke-4

BRIDGEPORT VMC 1000/30

Kondisi: baik (bekas), Tahun pembuatan: 2000, Bagian yang diperlihatkan dengan tangan di film atau foto tidak termasuk. 30 tempat alat pada alat penukar. Pendingin melalui spindle dengan tekanan 18 bar. Isdpow Tl Dtsfx Afcobd

Kondisi: bekas, Tahun pembuatan: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control: HEIDENHAIN Control: MillPlus iT Clamping surface of the table: ø 500 x 380 mm B-axis: 0 - 161.955° C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Infinitely variable feed rates up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Rapid traverse B-axis: 40 rpm C-axis rapid traverse: 50 rpm Tool magazine positions: 30 Tool diameter with 2 free adjacent pockets: 130 mm Ijdpowlvi Eefx Afcobd Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Through-spindle coolant supply: 40 bar Total connected load: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25 m/min, feed rate: 20 m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000 rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool stations: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Inclusive of chip conveyor, DMG EcoLine UNO 115 tool presetting device, machine vices, clamping tools, and various tool holders. The buffer battery is depleted and should be replaced if necessary. Documentation available. On-site inspection possible. Iodpfx Aovxvfhjfcebd

Kondisi: bekas, Tahun pembuatan: 2016, Travel in X-axis: 1270 mm Travel in Y-axis: 650 mm Travel in Z-axis: 610 mm Clamping surface of table: 1400 x 650 mm Control system: Fanuc Oi MDF Rapid traverse: 36 m/min Table load capacity: 1.0 t Spindle speed range: 12,000 rpm Spindle drive power: 15/25 kW Spindle torque: 118/159 Nm Number of tools in magazine: 48 pcs Internal coolant supply: 20 bar Tool holder: SK 40 + Big Plus Machine weight: approx. 9.0 t Dimensions (L x W x H): 4.45 x 3.3 x 3.24 m 3-axis vertical machining center with internal coolant supply. Initial commissioning: 2017 - Internal coolant supply 20 bar - 1x external chip conveyor - 2x internal spiral chip conveyors - Double-arm tool changer - Rigid tapping (without length compensation) - Main spindle with face contact (BigPlus) - Portable electronic handwheel - Air blast through spindle - Coolant gun - USB and network interface Isdpjuhrdgjfx Afcobd

Kondisi: baik (bekas), Tahun pembuatan: 2010, Heidenhain 530 Steuerung, Verfahrwege X/Y/Z: 1050 x 510 x 510 mm, Tischgröße: 1300 x 550 mm, Abstand Spindelnase-Tisch: 150 – 660 mm, Ibodpfx Afoucdvqocod Maximales Werkstückgewicht: 1200 kg, Spindeldrehzahl: 0 – 12.000 U/min, Spindelaufnahme: DIN 40, Spindelmotor: 11 kW, 30-fach Werkzeugwechsler (ATC), Späneförderer, Kühlmittelanlage, Niedervoltbeleuchtung,

Kondisi: bekas, Tahun pembuatan: 1995, Here is the English technical translation optimized for platforms like Machineseeker and TruckScout24: INDEX (Germany) CNC Slant-Bed Lathe with Turret, Tailstock, and INDEX CNC Control C 200-4 (SIEMENS) Model: G 300 Year: 1995 S/N: 5000 65 Technical Data: Ijdpfot Hw Sujx Afcebd - Max. Turning Diameter (with chuck): 300 mm - Spindle Bore: approx. 90 mm - Max. Workpiece Swing Diameter: approx. 400 (max. 590) mm - Max. Turning Length / Centre Distance: approx. 710 mm - Turret Slide Travel (Z axis / longitudinal): 710 mm - Turret Slide Travel (X axis / cross): 140 mm - Rapid Traverse Speed Tool Carrier: 20 m/min - Turret with 12 tool positions for DIN 30 tool holders (approx. 40 different holders included as accessories) - Feed Force X/Z Axis: 8/13 kN - Stepless Spindle Speeds: up to 5,000 rpm - Max. Spindle Torque at 100% ED: 275 Nm - Spindle/Tool Drive Power: approx. 28 kW - Total Power Requirement: approx. 40 kW, 400 V, 50 Hz - Machine Weight: approx. 6,000 kg Accessories / Special Features: • SIEMENS CNC 3-Axis Path Control Type SINUMERIC 840 C or INDEX C 200-4 for the following axes: Turret 1 = X/Z as well as C-axis (spindle orientation). The control panel is mounted left and can be swiveled. • Alignment and indexing device for the main spindle • Forkhardt KFD-HS 250 hydraulic 3-jaw chuck fitted, with numerous jaws, max. speed 5,000 rpm • INDEX turret with 12 tool positions for DIN 30 tooling; approx. 40 additional tool holders included as accessories. Turret stations are prepared for driven tools, drive via the indexing device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, operable via footswitch • KNOLL mobile chip conveyor with coolant facility and high-pressure pump • Front sliding door, otherwise complete enclosure. Oil skimmer This machine is ideal for shaft machining as well as for chuck workpieces. Very robust construction! (Please let me know if you need adaptations for other platform requirements or an export summary.)

Tahun pembuatan: 2021, Kondisi: seperti baru (mesin pameran),

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 29.532 h, Data Umum Berat mesin: 27.750 kg Unit Kontrol Merek: HEIDENHAIN Model: iTNC 530 Penggerak Utama Kisaran kecepatan spindle: 10.000 rpm Kepala alat: ISO 50 Jumlah sumbu: 5 Pergerakan Pergerakan sumbu X: 2.600 mm Pergerakan sumbu Y: 1.100 mm Ibsdpjxllmdjfx Afcod Pergerakan sumbu Z: 900 mm Meja Kapasitas beban meja: 4.000 kg Mesin 5-sumbu DMG MORI DMF 260-11 Linear ini diproduksi tahun 2017. Memiliki meja berukuran besar (3.200 mm x 1.100 mm), kapasitas beban tinggi (4.000 kg), dan jangkauan gerak sumbu yang luas (X: 2.600 mm, Y: 1.100 mm, Z: 900 mm). Dengan kecepatan spindle hingga 10.000 rpm dan majalah alat dengan 60 slot, mesin ini ideal untuk pekerjaan pemesinan kompleks. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin DMG MORI DMF 260-11 Linear yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 15.000 m/menit, pergeseran cepat sumbu Y: 15.000 m/menit, pergerakan cepat sumbu Z: 15.000 m/menit, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 20 rpm, 100%Retrofit by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2002 Control system: Heidenhain TNC 640 / TNC 7 Travel paths: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range (rpm): 20 – 4,000 Feed rates X, Y & Z axis (mm/min): 2 - 12,000 Max. rapid traverse speed X, Y & Z axis (mm/min): 15,000 Milling head: Automatic orthogonal milling head H10, 1° increment Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle, 37 kW - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & internal coolant supply (ICS) - Chip conveyor with floor discharge - Ergonomic operator platform - Safety guarding for hazardous zones - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We deliver the machine bed in the length you require, up to a maximum of 16,000 mm. 100%RetroFIT – our core business! For us, this means offering a machine that is truly comparable only to a new product, while also offering you numerous additional advantages: Ibsdpfov S Upfex Afcod - Latest CNC control technology combined with proven machine stability - Significant CO₂ savings compared to a new machine - Shorter delivery times - Often savings on complex foundation work - Significantly lower investment costs All mechanical components (e.g., ball screws, guides, roller bearings, etc.) have been replaced. Our engineers designed the complete electrical peripherals based on the most efficient technologies available (including the latest drive, control, and regulation technologies). Implementation includes new cabling, a completely new switch cabinet, and the latest Heidenhain control system with numerous innovative options. The entirely new and innovative hydraulic design meets the latest standards and achieves maximum efficiency. Through our refurbishment process, the machine matches the appearance of a new machine: The entire unit is completely disassembled down to every screw, ground, primed, and then finished with a durable 2K-EP coating. We have equipped the machine with a safety concept individually tailored to the operator’s needs, offering the highest level of safety, flexibility, and ergonomics. You receive a cutting-edge machine built to the latest standards, combined with substantial CO₂ savings.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 600 mm, INDEX C65 CNC turning and milling center Control: Index C200-4D (Siemens 840d) 3 turrets, each with 12 VDI-25 stations with W-teeth; all stations powered Iedov Dgpzopfx Afcsbd C-axis on both main and counter spindle Transmit/Transcyl function Index tool breakage monitoring Part removal gripper / parts conveyor belt 600L coolant tank with strainer, 8/18 bar Coolant-throughflow chiller Bar capacity up to 65 mm at main and counter spindle FMB Turbo 10-65, 3-meter bar loader Chip conveyor The machine will be cleaned and loaded onto truck free of charge