Mobil Bristol N281 tahun 2017

Bristol N 281

Kondisi: bekas, Tahun pembuatan: 2016, Machine operating hours: 5320 h Maximum pass-through width: 300 mm Processable sheet thickness: 1–15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0–2 m/min Length: 2600 mm Width: 2300 mm Height: 1300 mm Bedsv N I Hlepfx Aa Tewi Machine weight: 1900 kg Standard equipment: - Equipped with vacuum table for processing steel, stainless steel, and aluminium parts in sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming flipping and reworking of parts is eliminated - By folding away the innovative turning station, even parts with an edge length over 200 mm can be processed on one side - High level of automation enables economical and reliable processing even for large quantities - High and consistent processing quality - Dry processing (no chemical additives required as with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking distances for the operator - Energy-efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and easy tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment: Lissmac DDE 1500 extraction unit

Tahun pembuatan: 2025, Kondisi: baru, Parts Cleaning Machine, Spray Cleaning System Type L122 Automatically operating hot water chamber washing machine with basket drive via gear motor; system enclosure made of stainless steel 1.4301. - 2 pieces of 3-sided stainless steel nozzle systems with stainless steel flat jet nozzles - 2 stainless steel wash pumps (Manufacturer: Xylem/Lowara) - Level regulation for dry-run protection Bsdpfx Aehl Ic Rea Tswi - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Connected load (electrical): approx. 11.5 kW - System dimensions (W x D x H): 1,480 x 1,540 x 2,195(h) mm

Kondisi: bekas, Tahun pembuatan: 1980, nomor mesin/kendaraan: A-07/471A, Maximum sheet width: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feeding rollers: 2+2 Minimum sheet thickness: 0.4 mm Maximum sheet thickness: 3.5 mm Weight: 0.4 t Bodpfx Aascxxx Re Towi Space requirement approx.: 0.6 x 0.65 x 1.15 m Strip straightening machine with integrated infinitely variable VARI drive, reversible (forward and reverse operation), mode selector switch for manual and automatic operation, entry roller basket, analog display for roll position indication, roll position adjustment via handwheels, automatic loop control, in very good condition.

Kondisi: baru, Tahun pembuatan: 2025, Parts Cleaning Machine, Spray Cleaning System Type L122 Automatically operating hot water chamber washing machine with basket drive via gear motor; system enclosure made of stainless steel 1.4301. - 2 pieces of 3-sided stainless steel nozzle systems with stainless steel flat jet nozzles - 2 stainless steel wash pumps (Manufacturer: Xylem/Lowara) - Level regulation for dry-run protection - 2 suction filters for pump protection Bwjdpfef Dy Rwex Aa Tji - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Connected load (electrical): approx. 11.5 kW - System dimensions (W x D x H): 1,480 x 1,540 x 2,195(h) mm

Kondisi: bekas, Sheet width: 250 mm Outer coil diameter: 1400 mm Load capacity: 2500 kg Sheet thickness: 2 ... 4 mm Straightening speed: 2.5 ... 15 m/min Decoiler: expansion range mm Total power requirement: 1 + 4 kW Machine weight: approx. 1.8 t Space requirement: approx. ... m Decoiler MHR 250/4: Max. coil diameter: 1400 mm Inner coil diameter: 450 - 530 mm Unbraked decoiler with pressure roller Straightener MR 250/4: Strip entry height: 1250 mm Bsdpsfn Aqmefx Aa Tswi The system has been dismantled, inspected, and newly repainted.

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Total power requirement 2.2 kW Machine weight approx. 1.6 t Bwjdevprv Rspfx Aa Tei Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Kondisi: bekas, Tahun pembuatan: 1957, raw weight 200 kg raw stroke 525 mm blows per minute 150 blow energy 420 kJ distance bottom die / lower edge of hammer guide 435 mm throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm drive power 22.0 kW hammer weight 3.9 t anvil weight 3.0 t total weight 6.9 t space requirement (W x D x H) 1.1 x 2.3 x 2.4 m Forging hammer as-is and as located, WITHOUT commissioning Bwedpfx Aevzxpbja Tsi

Kondisi: sangat baik (bekas), Bandwidth: 6 - 200 mm Bjdpfxop E Ed Ro Aa Tjwi Strip thickness: 6 – 0.5 mm Speed: max. 100 m/min Working direction: optional Work roll diameter: 250 mm Roll length: 250 mm Roll core for roll ring assembly: 190 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, daya motor spindle: 29.000 W, kecepatan spindel (maks.): 5.000 rpm, berat keseluruhan: 620 kg, jumlah sumbu: 6, en Bwsdpfjx D E Hbjx Aa Tsi

Kondisi: baru, Tahun pembuatan: 2023, Extraction capacity at connection*: 2,600 m³/h (free suction) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 65 dB(A) Dimensions L/W/H in mm: L 9755 / W 508 / H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or special colour on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content) and smoke; suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air output - Available as Simplex (single-stage) or Duplex (two-stage) Bjdpfxjh Rdxne Aa Tjwi - Wide range of air output options available - Adaptable to pollutant load and air output requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for machining applications using pure oil, and for the separation of oil mist and smoke (oil mist separators). For many years, the digital electrostatic air filters in the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already optionally digitised and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 device variants and can be optimally configured for your specific application regarding size and performance. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are designed to achieve the best possible filtration efficiencies, service life, and trouble-free operation from an economic perspective.