Beli Fp2 bekas (127)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Perjalanan x: 400 mm Perjalanan y: 220 mm Perjalanan z: 400 mm Rentang kecepatan putar: 40 - 2000 rpm Tingkat kecepatan: 18 Kerucut dalam: SK40 Gerakan lengan spindle otomatis / manual: 190 / 200 mm Luas permukaan meja: 730 x 240 mm Gerak memanjang meja otomatis / manual: 390 / 400 mm Gerak vertikal meja otomatis / manual: 390 / 400 mm Kisaran feeding: 8 - 400 mm/menit Rapid traverse: 1200 mm/menit Layar digital elektronik SONY Meja putar Lemari baja dengan 5 laci dan berbagai aksesori mesin, misal: suku cadang mesin, holder alat, cutter, meja pengganti Iisdpfx Aexphn Esdqeh

Kondisi: diremaj di bengkel (bekas), Mesin Frais Alat Universal Iiedpfx Ajvfdatsdqoh Merek: harich (DECKEL) Model: B (FP 2) tanpa tingkat telah direkondisi dengan CE pengujian geometris dengan protokol pemeriksaan dilengkapi garansi Aksesori: - Pembaca digital 3-sumbu FAGOR Innova 30i-M - Meja tetap atau meja universal - Kepala frais vertikal SK 40 - Pelumasan sentral manual - Perangkat pendingin - Buku panduan pengoperasian Perlengkapan CE dan keselamatan: - Kelistrikan mesin baru dengan panel kontrol - Tutup pelindung di kepala frais vertikal dengan pengawasan elektronik - Pelindung cekam dengan pengaman elektronik - Motor penggerak dengan fungsi rem - Panel kontrol dengan tombol berhenti darurat, tombol aktifasi, mulai, dan stop, potensio untuk pengaturan feeding - Dokumentasi baru untuk mesin dan panel kontrol - Deklarasi konformitas CE

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin Milling Universal DECKEL FP 2 dengan tampilan digital tiga sumbu baru -Berjalan sangat halus dan sepenuhnya fungsional Iijdpsxn Tpfjfx Adqsh -Tampilan digital tiga sumbu "BARU" -Perjalanan sumbu X/Y/Z 400x200x400 mm -Feed otomatis / rapid traverse di ketiga sumbu -Spindle tool ISO 40 -Perangkat milling vertikal / horizontal -Kepala vertikal dapat diputar dengan pinol bor -Meja sudut -Lemari alat lengkap dengan aksesori -Lampu kerja -Dokumentasi Dimensi: PxLxT 1,5x1,7x1,8 meter / Berat 1500 kg Kesalahan dan kekeliruan data dapat terjadi.

Kondisi: bekas, Slotting head, slotting attachment suitable for DECKEL milling machine type FP 2 Iodpewbi Rbsfx Adqeih Serial No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke length: max. 80 mm Strokes: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke length adjustable via eccentric adjustment - Driven by the machine’s gearbox, within the dovetail guideway (like standard vertical head) - This slotting head is inserted into the dovetail slideway in place of the standard vertical milling head (mounted in place of the vertical head, milling head) - Drive gear in slotting head has 39 teeth, gear width 16 mm, assumed 20° pressure angle - Slotting attachment rotatable 360° at the flange plate, degree scale +/- 35° Weight: 32 kg very good condition DECKEL FP1 has a 15° pressure angle at the drive gear DECKEL FP2 + FP3 – have a 20° pressure angle at the drive gear

Kondisi: bekas, Gerak x 390 mm Gerak y 200 mm Iijdpfx Asxfb Hgjdqsh Gerak z 390 mm Ukuran meja 775 x 330 mm Taper spindle ISO Sk 40 Kecepatan spindle 40 - 2000 rpm Stroke kepala spindle 40 mm Kebutuhan daya total 2,2 kW Berat mesin sekitar 1,4 t Dimensi P x L x T 1,75 x 1,5 x 1,8 m Mesin frais universal - Layar digital - Pelindung serpihan - Sistem pendingin - Lampu mesin - Wadah serpihan - Kaki mesin - Buku petunjuk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1980, panjang pemakanan sumbu X: 400 mm, panjang umpan sumbu Y: 220 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, Universal table 700x240mm Travel 400x220x400mm Maximum spindle speed 2500 rpm Weight 1400 kg Iijdpov Av I Refx Adqjh

Kondisi: baik (bekas), Drilling and milling head for Deckel milling machine Iijdpfjv U A S Hex Adqeh

Kondisi: diremaj di bengkel (bekas), Mesin Frais Universal Merek: harich (DECKEL) Model: B (FP 2) telah direkondisi ulang dengan sertifikasi CE Pengukuran geometris dengan protokol pengujian dengan garansi Perlengkapan: - Display digital 3-sumbu FAGOR Innova 30i-M - Meja tetap atau meja universal - Kepala frais vertikal SK 40 - Sistem pendingin - Buku panduan operasional Perlengkapan CE & keselamatan: - Instalasi listrik mesin baru dengan panel kontrol Iiedpodvdczefx Adqsh - Penutup pelindung pada kepala frais vertikal dengan pemantauan elektronik - Pelindung chuck dengan pengamanan listrik - Motor penggerak dengan fungsi rem - Panel kontrol dengan tombol Emergency-Stop, Release, Start, dan Stop - Dokumentasi baru untuk mesin dan panel kontrol - Pernyataan kesesuaian CE

Kondisi: baik (bekas), Tahun pembuatan: 1976, Mesin frais alat Deckel FP3 dengan display digital Heidenhain 3 sumbu, mesin dalam kondisi baik. Meja kaku, dudukan spindle SK 40, aksesoris: berbagai collet dan arbor frais, penahan belakang. Dalam kondisi operasi yang baik. Bisa didemokan dalam kondisi menyala atas kesepakatan. Iisdsxbx R Ujpfx Adqeh

Kondisi: bekas, Bantalan penahan dan adaptor untuk mesin frais horizontal Bantalan penahan dan adaptor (penahan balik) untuk mesin frais DECKEL (Bantalan dukungan dengan adaptor ekor burung walet DECEL FP1 + FP2) Tipe 9570 Lebar ekor burung walet sempit: sekitar 72 mm Lebar ekor burung walet lebar: sekitar 88 mm Iisdjxcbl Dspfx Adqsh Tinggi ekor burung walet: sekitar 15 mm Panjang dudukan bantalan: 133 mm Lebar dudukan bantalan: 50 mm Tinggi total dudukan bantalan: 105 mm Lubang bantalan: Ø 17 mm (dengan bushing bantalan perunggu) Jarak sumbu lubang ke permukaan ekor burung walet: sekitar 82,5 mm (tinggi puncak) - Adaptor cocok dengan ekor burung walet dan permukaan penjepitan, peningkatan 22,5 mm sehingga ketinggian puncak menjadi 105 mm Panjang total rel ekor burung walet: 635 mm Berat: 3,8 kg Kondisi sangat baik

Kondisi: baik (bekas), DECKEL - FP2 with New Three-Axis Digital Readout from Educational Facility -Well-maintained original condition -Traverse paths X/Y/Z: 400x200x400mm -3-axis digital readout "NEW" -Swivel table – clamping surface 700x350mm -Spindle speed range: 40-2000 rpm -Automatic feeds on all three axes -Rapid traverse on all three axes -Tool holder ISO 40 -Vertical/horizontal milling facility -Swiveling vertical head with quill -Coolant system -Lead screw nut X-axis "NEW" -Machine feet Iedpfxjwtbq De Adqoih -"RÖHM" machine vice -Various tool holders -Chip guard / machine base -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500kg Subject to errors and input mistakes.

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A completely overhauled universal tool milling machine Deckel FP2 (year of overhaul: 2019) is available. Travel distances X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Iisdpfxevf Iy Dj Adqoh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP2 in special paint finish with 3-axis Sony digital readout from university use!! Technical specifications: >> Machine No.: 4547 Iisdpjwkhvnsfx Adqoh >> Swiveling tilting rotary table >> Spindle speed: 40 – 2000 rpm >> Feed and rapid traverse on all three axes >> Drive power: 2.2 kW >> Travel distances (X/Y/Z): 500/200/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill – SK-40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and features: >> 3-axis Sony digital readout >> Coolant system About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. It comes from a government facility and has seen very little use. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Sony digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power.

Kondisi: sangat baik (bekas), Digital readout Travel paths X/Y/Z: 400 x 200 x 400 mm Table size: 700 x 330 mm Toolholder: ISO 40 Isdpswn Td Ejfx Adqoih Hydraulic vice Completely overhauled in 2019

Kondisi: baik (bekas), Tahun pembuatan: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, SK 40 spindle taper. Extended ram-type milling head. Accessories include various collets and cutter arbors, tailstock. Good operational condition. Can be demonstrated under power by appointment. Iisdpfxsumclas Adqoh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, -KOM 3149- Offered here is a slotting head for an FP2 Deckel milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guide surfaces are in very good condition. The dimensions of the slotting head can be found in the last picture. Iiodpfx Aowxxd Sodqjh

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, en-001 Isdpehqg Tljfx Adqjih

Kondisi: bekas, Milling machine Make: DECKEL Model: FP2 Technical Specifications Manufacturer: DECKEL Model: FP 2 Table size: 700 x 330 mm X-axis travel: 490 mm Y-axis travel: 390 mm Z-axis travel: 200 mm Spindle taper: ISO 40 18 spindle speeds: 40 – 2000 rpm 18 feed rates: 8 – 400 mm/min Motor power: 2.2 kW External dimensions: approx. W1100 x D1400 x H1600 mm Weight: approx. 1100 kg Features • 3-axis digital readout ACU-RITE • Various collets • Accessory package as per photos All information subject to change without notice. Iodpfx Aov Uzztedqjih A demonstration is possible at any time in our showroom.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 in special light gray paint finish with new 3-axis K+C digital readout Technical Data: >> Machine No. 5983, Year of Manufacture: approx. 1975 >> Fixed angle table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK-40 taper >> Drawbar system S20x2 >> Weight approx. 1100 kg Iisdpfju I Rm Nox Adqeh Accessories and Equipment: >> 3-axis digital readout by K+C, newly installed with manufacturer's warranty. Display unit: Set reference and zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, bolt hole patterns, radius milling functions, etc. >> Operating manual for digital readout >> Coolant system About the Machine: Offered is a Deckel FP2 universal milling machine in good condition. The Deckel shows minimal backlash on the handwheels, and all spindles move smoothly. The machine has been completely disassembled and newly painted. An oil change has been performed. Mechanically and electrically tested. The K+C digital readout makes operation easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: baik (bekas), Tahun pembuatan: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angle table clamping area 700 x 285 mm Travel paths X-axis 500 mm Y-axis 200 + approx. 250 mm Isdpfsm Uygvox Adqjih Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Deckel FP 2 Tool Milling Machine *Partially Overhauled* Item number: 07-07-112 Manufacturer: Deckel Very good overall condition Machine partially overhauled Delivery time: on request, subject to prior sale Year of manufacture: approx. 1978 Dimensions (L x W x H): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Digital readout: 3-axis digital readout Sino *new* Travel distances: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 350 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds & rapid traverses: in all 3 axes Feed range: approx. 8–400 mm/min Rapid traverse: approx. 1.5 m/min Equipment: - Vertical & horizontal milling device - Work lamp *new* - Coolant system *new* - Complete documentation - Various clamping wrenches - 3-axis digital readout SINO *new* - Spindle protection cap - Horizontal spindle cover cap - Chip tray - Safety handwheels - Machine feet *new* Iiedpfx Adewfxggoqeh Further accessories on request Price and further technical details on request

Kondisi: bekas, 3-axis digital readout Heidenhain ND780 Coolant system Mechanical central lubrication Fixed angle table X-axis travel: 400 mm Y-axis travel: 220 mm Z-axis travel: 400 mm Spindle speed: 25 – 2500 rpm Infinitely variable feed on 3 axes Rapid traverse on 3 axes Spindle brake Vertical milling head adjustable by 150 mm on spindle support Extendable vertical and horizontal quills – SK 40 taper Drawbar system S20x2 Iedpfx Ajbu U Nnodqoih Weight approx. 1400 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted Color: RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 6976 with warranty geometric acceptance incl. test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual -Used, as seen- Isdpfed Tytyjx Adqsih

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, de Iijdev R Duhspfx Adqoh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Iedovbifgepfx Adqsih Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.