Otomatis meninju tekan
BRUDERER BSTA 30

Name: BRUDERER BSTA 30
Brand: BRUDERER
Availability: InStock

tahun pembuatan

1971

Kondisi

Bekas

Lokasi

Eislingen/Fils Jerman

Tampilkan peta

Data mesin

Nama mesin:: Otomatis meninju tekan

Pabrikan:: BRUDERER

Model:: BSTA 30

Nomor mesin:: 1967

Tahun pembuatan:: 1971

Kondisi:: bekas

Harga & Lokasi

Lokasi:: Eislingen

Hubungi

Rincian penawaran

ID iklan:: A2739818

Nomor referensi:: 1009-2170

Pembaruan:: terakhir pada 12.06.2024

Deskripsi

Pressure: 30 t
Stroke rate: 100 - 600 strokes/min
Adjustable stroke range: 8 - 40 mm
Ram adjustment: 40 mm
Feed width: 198 mm
Tool installation height - min./max.: 230 - 270 mm
Roller width: 110 mm
Pass-through opening in table: 310 x 80 mm
Column distance (left-right): 330 mm
Column distance (front-rear): 280 mm
Table height above floor: 990 mm
Column diameter: 50 mm
Voltage: 380 V
Frequency: 50/60 Hz
Control voltage: 24 V
Table size: 475 x 450 mm
Ram diameter: 190 mm
Total power requirement: 0.96 - 5.5 kW
Machine weight approx.: 2.5 t
Space requirement approx.: 1.2 x 1.16 x 2.15 m

Precision high-speed punching press in 3-column design, with:
- Optionally available with original Bruderer precision double roller feed, pull and push operation on right and left side (see photo),
Todpfscxxxmjx Aatof
- Electro-hydraulic VARI drive,
- Pneumatic clutch with safety valve,
- Three operating modes: single stroke, single cycle, and continuous operation,
- Central lubrication,
- Cooling fan for consistent machine temperature,
- Pressure gauge for air pressure monitoring,
- Stroke counter integrated in the control panel,
- Separate, lockable control cabinet,
- Two-hand operation, and
- Emergency stop safety feature.

Newly painted, visually in good condition!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2003

136 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7161 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Menekan kolom ganda tekan otomatis BRUDERER BSTA 30

Eislingen/Fils

11.123 km

Menekan kolom ganda tekan otomatis
BRUDERERBSTA 30

€14.500

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Todjvuk Hrjpfx Aatof Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm As is, where is, WITHOUT being put into operation

Lihat detail

iklan kecil

Mierlo

11.345 km

Mesin penggilingan bor
RogiWMD45A

Hubungi

Kondisi: baru, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Tedpfsga Tyzex Aatof Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout, brand SINO * Automatic longitudinal feed of the worktable * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head electrically height-adjustable * Various tools in case

Lihat detail

iklan kecil

Mesin meninju otomatis BRUDERER + SOPREM Typ BSTA 30

Schwabach

11.015 km

Mesin meninju otomatis
BRUDERER + SOPREMTyp BSTA 30

Hubungi

iklan kecil

Strassberg

11.178 km

Mesin meninju otomatis
BRUDERERBSTA 30

Hubungi

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5136, Pressing force: 30 t Adjustable ram stroke: 16 - 40 mm Ram adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Distance between uprights (sideways): 170 mm Table clamping surface approx.: 480 x 450 mm Ram clamping surface approx.: 250 mm Strokes per minute: 100 - 600 min-1 Power requirement: 5.5 kW Dimensions LxWxH: 2,150 x 1,200 x 1,160 mm Machine weight approx.: 2.5 t Standard equipment Roll feed, feed length 20 - 100 mm, conventional press control by Bruderer Additional equipment Second roll feed at table outlet, vibration dampers (4x), various adapter plates for the ram, Raziol coil lubrication, Vester tool safety device Tjdeuqd Rrjpfx Aatef Automation Roll feed BBV 120/60

Lihat detail

iklan kecil

Tekan eksentrik - satu kolom HELMERDING ERH 75 B

Schmölln

10.896 km

Tekan eksentrik - satu kolom
HELMERDINGERH 75 B

Hubungi

Tahun pembuatan: 1990, Kondisi: bekas, Pressure: 75 t Tjdpfx Aajd Nl E Uetjf Outreach: 300 mm Stroke: 8 - 110 mm Table surface: 750 x 600 mm Ram adjustment: 75 mm Ram area: 430 x 230 mm Pass-through opening in table: 250 x 150 mm Pin hole in ram: 40 mm Stroke rate: 60 + 90 strokes/min Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram with stroke down, ram down: 19 mm Distance table/ram with stroke up, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, featuring new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for mounting tool change consoles - 2 roller rails in the table - mechanical overload in ram (rupture plate) The following work will be carried out on the machine / partial overhaul: - Machine will be completely disassembled, checked, seals replaced, defective parts exchanged, etc. - Machine will be newly painted - new Balluff cam switch mechanism - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - current UVV (accident prevention regulation) inspection with brake time measurement

Lihat detail

iklan kecil

Berlin

10.804 km

Mesin pemukul
BRUDERERBSTA 30

Hubungi

iklan kecil

Eislingen/Fils

11.123 km

Otomatis meninju tekan
BRUDERERBSTA 30

Hubungi

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Adjustable stroke: 16-40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m Tjdpfjcxxu Nsx Aatsf High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Lihat detail

iklan kecil

Pipa dan profil pipa / pabrik pengelasan pipa MAS/ MAIR

Jerman

11.207 km

Pipa dan profil pipa / pabrik pengelasan pipa
MAS/ MAIR

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Pipe Ø: 25 – 60 mm Wall thickness: 1 – 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 – 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line configuration: - Decoiler - Shear (crop shear) - Welding table - Edge trimming shear with scrap cutter - Scrap conveyor - Strip edge preparation - Entry table Tedpfxsuc Shuj Aatof - Forming unit - Internal/external scarfing tools - Cooling section - Sizing section - Testing unit and length measurement - Cut-to-length - Ejection station for reject pipes - Blow-out station - Oiling station - Bundling station - Strapping station - Bundle removal - Electrical system

Lihat detail

iklan kecil

Berlin

10.804 km

Mesin meninju otomatis
BRUDERERBSTA 30

Hubungi

iklan kecil

Eislingen/Fils

11.123 km

Otomatis meninju tekan
BRUDERERBSTA 30

Hubungi

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double roll feed: left Tedpjcxxycsfx Aatsf Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Lihat detail

iklan kecil

GERGAJI MITRE GANDA PERTICI UNIVER 330IP

San Giovanni Al Natisone

10.893 km

GERGAJI MITRE GANDA
PERTICIUNIVER 330IP

Hubungi

iklan kecil

Berlin

10.804 km

Mesin meninju otomatis
BRUDERERBSTA 30

Hubungi

iklan kecil

Eislingen/Fils

11.123 km

Otomatis meninju tekan
BRUDERERBSTA 30

Hubungi

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Tedpfx Aaecxxrdotof Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Entry width: 120 mm Feed length: 15-80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total connected load: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Lihat detail

iklan kecil