Pengering ruang

Brunner Hildebrand BTV 5

Kondisi: bekas, 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal treatment system / thermal chamber for wood modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler plant that uses thermal oil as a heat transfer medium. Technical Data: Capacity: 5,950 – 9,900 m³ of wood per year (at 330 operating days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Electrical connection: 3 x 400 V, 50 Hz + Neutral + Earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230°C – 250°C thermal oil) Heat consumption: 120 kWh/m³ of wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm Duplex stainless steel EN 4462 Hydraulically operated door with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Operating temperature: 0°C to 220°C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main Components: 1. Autoclave for the heat treatment process 2. Vacuum system for evacuating the autoclave before heat is applied 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (sea water resistant) Total area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature probes 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Bsdpev Si Szsfx Apcsli Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of the customer, ex location near 5020 Salzburg (Austria), without dismantling, transport or assembly Dismantling, loading, and transport by us optionally available Subject to error in description and price To avoid misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to pickup or shipment Delivery terms: ex location

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang total: 36.000 mm, Flatironing dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with pressure rollers), separate pressing/cooling section, heating medium: hot water, semi-automatic feeding device, type BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017. Bledpfov Hygfsx Apcsi A second flatironing dryer of a similar design is also available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Press type JJZ-CP designed for the production of plywood, doors, and MDF boards. The feeding and removal of laminated elements from the press is performed automatically using driven rollers. The press can operate in conjunction with glue dispensers. Technical data: - Maximum pressure: 500T (adjustable) - Maximum material height: 1300 mm - Maximum material size: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Installation depth: approx. 500 mm below floor level - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm - Maximum power: 13.2 kW Blodpfx Apetutwvocsi - CE mark

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Perlengkapan dan data teknis: - Pengering terpasang lengkap dengan troli, kipas radial berkinerja tinggi, pemanas listrik, - Katup udara masuk dan keluar, termostat pengaman, perangkat penyemprot - Pintu angkat berputar untuk membuka dan menutup pengering dengan praktis - Pelapis dalam: semua dinding samping terbuat dari aluminium khusus tahan air laut - Lantai dari baja tahan karat secara permanen tahan terhadap zat agresif dalam kayu seperti asam tanin, dll. Bjdpfx Aoy R Ha Sjpcjli - Penyegelan sambungan benar-benar tahan lama dan memungkinkan juga proses penguapan dalam instalasi - Ukuran tumpukan: 530 x 105 x 115 cm - Volume tumpukan: 6,4 m³ - Dimensi luar: sekitar 690 x 140 x 200 cm - Pemanas: 12 kW - Motor: 1,1 kW / 400 V - Dilengkapi dengan kontrol MP 902 Ketersediaan: segera Lokasi: 63934 Röllbach

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Vanicek drying chamber with stake wagon with entry and exit gates (hinged doors) with control system and electrical switch cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, electric motor 1.1 kW / 400 V Blodpfx Apewxdqkecoi Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (by customer) Control system, heating coil, fan frame Stacking dimensions: 1x12.50 m, 2x1.20 m, 2x1.00 m

Tahun pembuatan: 2009, Kondisi: baik (bekas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 Bedpfepu Anmsx Apcjli • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), furnierlinie-cremona-1999-technische-details Bodpfew I E Dvex Apceli

Kondisi: bekas, Tahun pembuatan: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating structuring brush on the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece pass-through height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display device for the electric motor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is functional; defective in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Photos show the machine in uninspected condition! Availability: short-term Location: Röllbach Bjdpfx Ajw R Hh Uepcjli

Kondisi: baik (bekas), Obel Pedersen High-Frequency Continuous Belt Press Opel-Pedersen Press Type 2412 Pressing length 2500 mm, width 600 mm With gluing unit, feed table, HF generator T20 V and water cooling The system is dismantled. Bledpfjdybr Rex Apcoi

Tahun pembuatan: 1995, Kondisi: baik (bekas), Kuper veneer zig-zag splicing machine, model FW/1200-E Year of manufacture: 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min Bljdpfx Aohbp Ifepcsi - Electronically steplessly adjustable zig-zag width of the glue thread cutting device Max. veneer thickness: 3.0 mm Min. veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting the veneer across the veneer table Foot pedal control Feed speed: 35-60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m