Kapal tanker makanan

Burg Food tank trailer

Kondisi: bekas, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/2000, volume ruang muat: 36 m³, panjang total: 11.630 mm, lebar total: 2.500 mm, suspensi: udara, ukuran ban: 425/65 R 22.5, jarak roda: 8.020 mm, Tahun pembuatan: 2000, Perlengkapan: ABS,

Kondisi: bekas, 2-station notching machine and press brake EUROMAC type Multi 220/6R Press brake, folding machine, notching machine Serial no. M11941298, year 1998 Cutting capacity: 6 mm steel at 45 kg/mm², 4 mm stainless steel Station I (Notching) - Notching angle: 60° to 140° (with special blade from 30° to 140°) - Blade length: 220 mm - Table size: 950 x 640 mm - Manual angle adjustment via handwheels - Notching angle adjustable with installed blade set from 60° to 140° - Hydraulic clamping of upper and lower blades - Automatic blade clearance adjustment - Sheet hold-down device - Integrated scaled measuring tapes in the table Bodpfx Asmck Ryjf Sslc - Adjustable stop rails with angle adjustment - Foot switch operation Station II (Press Braking Unit) - Press force: 18 tons - Table size: 950 x 340 mm - Working height: 1100 mm - Infinitely variable stroke speed - Infinitely adjustable stroke limitation - Stroke adjustment up to 30 mm working stroke - Reversible V-die with 4 x 90° prisms, length 415 mm - Top tool 90°, length 415 mm Motor power: 4 kW Power supply: 400 Volt, 50 Hz Space required (L x W x H): 1150 x 1050 x 1460 mm Weight: approx. 1000 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1993, Press force 250 t Stroke 500 mm Upright width 1650 mm Lateral upright clearance 750 mm Installation height - stroke up 1200 mm Table area 1650 x 1250 mm Blankholder force in table 80 t Blankholder stroke in table 250 mm Blankholder area in table 1070 x 780 mm Table height above floor 850 mm Ram area 1650 x 1250 mm Downward speed from 10 mm/s Bodpfx Aov Svb Aef Sslc Upward speed 80 mm/s Working speed 10 mm/s Oil capacity 400 l Drive power 22.0 kW Weight 21.5 t Space requirement (WxDxH) 2.7 x 2.3 x 4.25 m Height above floor 4.0 mm Approved for manual part loading/unloading in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, pressure- and stroke-dependent control, hydraulic blankholder in the table, hydraulic cut shock damping (4x parallel support cylinders), hydraulic-mechanical depth stop, two-hand operation, hand lever operation

Kondisi: bekas, Tahun pembuatan: 2000, Press brake CNC Produsen: Trumpf Tipe: Truma Bend V170 Tahun pembuatan: 2000 Kontrol CNC: Delem Kekuatan tekan: 170 ton Bledpfx Ajx Di Hxof Ssc Lebar kerja: 4 m Bombierung Backgauge 6 sumbu Penjepitan alat hidrolik Tinggi: 2,9 m tanpa alat ID: ä3226

Kondisi: baru, Tahun pembuatan: 2025, Max. sheet thickness: 8 mm Press force: 200 t Bending length: 3,200 mm Motor power: 15 kW Return speed: 105 mm/min Working speed: 9 mm/sec X-axis travel: 600 mm Max. opening height: 570 mm Controller: DELEM DA53T GERD WOLFF KANTO 200T CNC electro-hydraulic press brake CNC-Axis Accuracy 1) Machine Ram (Y1, Y2) – Synchronization Precision: Blodpexf Na Uofx Af Soc The ram movement axes control bending depth and angle. The system consists of the CNC controller, two glass scales (Y1, Y2) installed on the machine table, electro-hydraulic proportional valves, and an amplifier. A closed-loop control system monitors and regulates the relative position between ram and table, as well as the speed and position of the ram. This ensures synchronization and highly accurate depth and angle control. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Backgauge (X-Axis): The forward/backward movement of the X-axis sets the sheet dimension. The backgauge beam is driven by a servomotor and moves the traverse via ball screw and linear guide. The operation is stable and highly precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical Crowning System (V-Axis): The crowning plate is motor-adjusted, forming an arc shape at the compensation points. These compensate for the elastic deformation of the machine table and ram, ensuring perfect angle consistency and workpiece straightness. Position sensors and CNC control provide precise regulation.

Kondisi: bekas, Tahun pembuatan: 1970, de-1 Bjdpfxeyacnpo Af Solc

Kondisi: bekas, Tahun pembuatan: 1996, Pressing force 130 t Distance between uprights 1220/1070 mm Stroke 22 - 96 mm Strokes per minute 20 - 120 spm Die height (stroke + ram adjustment at top) 518 mm Lateral gap between uprights 600 mm Table area 1220 x 880 mm Through-hole in table 450 x 250 mm Table height above floor 950 mm Ram area 1180 x 800 mm Drive power 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Ram adjustment 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, automatic stroke adjustment, 8-way roller guide, electronic roller feed with hydraulic intermediate ventilation (Hensel, EVX 500) Blsdpfovuubyox Af Sec

Kondisi: bekas, Tahun pembuatan: 1982, Pressing force 150 t Throat depth 520 mm Stroke 30 - 200 mm Stroke rate 15 - 60 /min Blodpfxsvuudbo Af Sjc Distance between table and ram, large stroke top, adjustment top 650 mm Table surface 1600 x 1000 mm Passage opening in the table 1040 x 140 mm Table height above floor 1000 mm Clearance between side frames 1000 mm Ram surface 1400 x 800 mm Ram adjustment 120 mm Drive power 20.0 kW Weight 27.5 t Space requirement (W x D x H) 2.3 x 2.75 x 4.5 m Only approved for use with safety tooling or fixed guarding in accordance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch/brake combination (Ortlinghaus make), hydraulic overload protection in the ram, pneumatic ram counterbalance, semi-automatic ram adjustment Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1978, Pressure 150 t Fixed stroke 80 mm Stroke rate 30 - 150 /min Upright spacing 930 mm Shut height (stroke + ram adjustment at top) 400 mm Lateral upright passage 650 mm Table surface 880x1300 / 1500x600 mm Through-hole in table 760 x 180 mm Table height above floor 1270 mm Ram surface 920x1000 / 1300x600 mm Weight 27.5 t Space requirement approx. 3.1 x 1.8 x 4.3 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fixed stroke, motorized ram adjustment, pneumatic ram weight compensation, central lubrication WITHOUT feed Bodpfxjvut Urj Af Selc As is, as seen, WITHOUT commissioning Price for commissioning (with new control system) upon request

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 160 mm, lubang spindel: 36 mm, diameter pembubutan: 300 mm, tinggi pusat: 150 mm, lebar di tengah: 500 mm, panjang total: 1.500 mm, lebar total: 800 mm, tinggi total: 1.300 mm, kecepatan spindel (maks.): 3.550 rpm, kecepatan spindel (min.): 15 rpm, berat keseluruhan: 1.000 kg, 1 Bedpjx Urmlofx Af Sjlc