Mesin pembengkok Bystronic Xpert 40/1030

Bystronic Xpert 40/1030

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40/1030 Year of Manufacture: 2017 Technical Data Manufacturer: BYSTRONIC Model: Xpert 40/1030 Year: 2017 Press Force: 40 t Lhsdpfx Acjyim Txe Hec Operating Hours: 12,830 h (displayed) Cycle Counter: 1,373,850 Bending Length: 1030 mm Stroke: 200 mm Distance Between Frames: 1060 mm Motor Power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Equipment • 6-axis backgauge • Hydraulic clamping top + bottom • RF-A upper tool holder • Height-adjustable ByVision Bending display with 22" Full HD touchscreen • Support table • Ergo LED workspace lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC Interface Bending • Bend curve generator • Automatic tool overload protection • Rear sliding door with electronic monitoring • Oil cooler • Ergo foot switch • Upper tool, straight, R1/30°, H 250mm, L 1,000mm, segmented • Upper tool, gooseneck, R1.5/85°, H 175mm, L 1,000mm, segmented • Lower tool V10/30°, H 55mm, L 1,000mm, segmented All details are supplied without guarantee. A powered demonstration is available at any time in our showroom.

Kondisi: baru, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg / piece Rotational speed: 22 rpm Filling level: 40-50% Colour: Blue, RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Hexagonal drum lined with 36 mm abrasion-resistant, vulcanised rubber, shutter for protection against the rotating container, robust design, easy to operate. Control panel with timer, hour counter, main switch, emergency stop and signal light. The maximum filling level is 40% of the container volume and corresponds to 300 kg, consisting of 200 kg of workpieces plus 100 kg of deburring media = high-manganese steel balls or cast iron pentagons. These are available from Sideros: high-manganese steel balls per 100 kg €400, cast iron pentagons per 100 kg €950. Dust extraction unit Sideros ECO A (Photo 8) available for a surcharge of €1,900 plus VAT. Ljdpou Uu T Rjfx Ac Hohc The manufacturer recommends sending approx. 100 kg of sample parts for testing to the factory in Italy before placing an order, in order to ensure optimal deburring results. Otherwise, the manufacturer does not assume responsibility for the deburring result. Warranty: 12 months for single-shift operation. In case of spare part shipment, defective parts must be returned. Machine downtimes are not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 11.106 h, nomor mesin/kendaraan: 16500033, panjang langkah: 200 mm, berat keseluruhan: 4.000 kg, panjang total: 1.700 mm, lebar total: 1.500 mm, tinggi total: 2.500 mm, BYSTRONIC XPERT 40/1030 CNC Mesin Tekuk Pres - Tegangan operasi: 400 V - Daya total terpasang: 12 kW - Arus nominal: 32 A - Panjang kerja: 1030 mm - Tekanan maksimum: 400 kN - Langkah maksimum: 200 mm Ledpfx Acoyidmpj Hohc - Termasuk alat dan perkakas tekuk yang sesuai Perhatian: Barang harus diambil secara pasti antara 07.04 dan 16.04.2026, pada tanggal yang akan disepakati. FCA D-73079 Süßen – dimuat ke truk

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 7.724 h, nomor mesin/kendaraan: 19500015 + 508267, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, produsen pengendali: Bystronic, model controller: ByVision, gaya tekuk (maks.): 40 t, lebar kerja: 1.030 mm, panjang langkah: 200 mm, jarak antara penyangga: 1.060 mm, tinggi pemasangan: 515 mm, kecepatan operasi: 1.500 mm/dtk, kapasitas tangki oli: 100 l, jarak pergerakan sumbu X: 300 mm, kecepatan pengukur belakang poros R: 500 mm/dtk, Perjalanan back gauge sumbu R: 100 mm, jarak pergerakan pengukur belakang sumbu Z: 955 mm, berat keseluruhan: 4.000 kg, panjang total: 3.250 mm, lebar total: 2.800 mm, tinggi total: 2.500 mm, daya: 7,5 kW (10,20 hp), tegangan masuk: 400 V, arus masuk: 32 A, frekuensi input: 50 Hz, Perlengkapan: henti darurat, kendali jauh kaki, penghadang cahaya keselamatan, perlindungan jari, For sale: Automated press brake with integrated robot system, direct from first owner, for high-volume sheet metal forming. Press Brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Technical Specifications Press Brake - Pressing force: 400kN (40t) - Working length: 1030mm - Control system: ByVision Ljdpfsx El Nhox Ac Hjhc Robot - Max. rated payload: 11kg - Reach: 1100mm - Axes: 6-axis - Position repeatability: 0.02mm - CE-certified safety modules Features - Fully automated press brake cell with integrated 6-axis industrial robot - Single ownership - Footprint (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending operating terminal with 22-inch Full HD touchscreen Machine Condition - Operating hours: 7,724 h - Cycle count: 310,212 - Complete service history, regularly maintained - Technically faultless condition - Functional test can be demonstrated during inspection - Location: Niederrohrdorf, Switzerland Terms - Original price: CHF 250,000 (2019) - Asking price: CHF 150,000 (negotiable) - Disassembly, collection, transport: to be organized by buyer - Availability: immediate / by arrangement - Payment: advance bank transfer - Warranty: The system is sold as viewed, with warranty for material defects excluded. No guarantee or further liability is assumed by the seller.

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Lhsdpfehgihkex Ac Hoc Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2017, jam operasional: 49.641 h, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, produsen pengendali: Bystronic, gaya tekuk (maks.): 40 t, lebar kerja: 60 mm, panjang langkah: 200 mm, kapasitas tangki oli: 100 l, jarak pergerakan sumbu X: 300 mm, kecepatan pengukur belakang poros R: 500 mm/dtk, Perjalanan back gauge sumbu R: 100 mm, jarak pergerakan pengukur belakang sumbu Z: 955 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, penghadang cahaya keselamatan, perlindungan jari, de Ljdpsxtf A Isfx Ac Hshc

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 28.300 h, nomor mesin/kendaraan: 16500126, Pressure: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis traverse speed: 1500 mm/s R-axis travel: 100 mm R-axis traverse speed: 500 mm/s Z-axis approach: 955 mm Z-axis rapid traverse: 2000 mm/s Y-axis rapid traverse: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm Lhedpjwv N Nasfx Ac Hjc 1. Intelligent control method and exceptionally low-noise drive (below 75 dB) in the Xpert 40 allow parts to be produced with around 30% less energy consumption compared to conventional electrically driven machines. 2. ByVision software with 22-inch LCD touchscreen display. 3. Intelligent process control guidance with Energy Saver. 4. Automatic tool protection system. 5. Foot pedal. 6. Electrically controlled protective sliding doors. 7. User manual on CD. 8. Ambient temperature: 7°C to 35°C. 9. Voltage: 400 V, 50 Hz, 3 Ph. 10. Bend G2 – optical protection system with manual height adjustment. 11. 6-axis backgauge (additional 3 axes). 12. 3rd backgauge kit - Xpert 40 (N0002.0040.000) – kit for integrating a third backgauge in the press brake. 13. Ergonomic LED lighting package, light intensity – 1500 lux. 14. Ergonomic front supports with table, max load capacity 35 kg. 15. “At hand” tool cabinet – accommodates 3m of tools within arm's reach (1 punch set, 2 die sets). 16. Optical bending guidance system – operator is guided by the optical system throughout the bending process. 17. Ergo Bending Line Laser – Bystronic laser bending line assists the operator by visualizing the bend line on the material surface. The operator is aided by the virtual bend line if it is not possible to use backgauge fingers (either fully or partially). The laser bend line can be set at various heights (e.g., 55 / 100mm) depending on the die height, material thickness, or part size. 18. Efficient XPT clamping package (WILA NSCL II upper tool holder and T12/90 table). 19. WILA hydraulic clamping package includes upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – the XPT (Wila) upper tool clamping enables tool mounting in both 0 and 180° orientations. 21. T12/90 table (Productive clamping pack XPT) – the 90mm high, 72mm wide T12/90 table provides ample space for Z-bends. The machine is fully operational and in continuous use. Viewings and machine tests are welcome.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 30.979 h, nomor mesin/kendaraan: B0702A1678, jenis kontrol: Kontrol CNC, gaya tekuk (maks.): 36 t, lebar kerja: 1.020 mm, panjang langkah: 120 mm, kedalaman tenggorokan: 150 mm, jarak antara penyangga: 932 mm, tinggi pemasangan: 2.390 mm, kecepatan operasi: 25 mm/dtk, kecepatan mundur: 220 mm/dtk, jumlah sumbu: 6, tinggi meja: 955 mm, jenis mahkota: dikendalikan CNC, berat keseluruhan: 2.600 kg, panjang total: 1.900 mm, lebar total: 1.800 mm, tinggi total: 2.390 mm, tegangan masuk: 400 V, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, sistem penjepitan alat Eropa, Kondisi mesin Kondisi teknis: sangat baik, sepenuhnya berfungsi Digunakan dalam kondisi bersih, tanpa kerusakan struktural Tersedia pengujian dan pemeriksaan di lokasi Dokumentasi lengkap tersedia untuk dilihat Fitur utama dan perlengkapan Kekuatan tekuk: 36 t (360 kN) Panjang tekuk: 1020 mm Kedalaman tenggorokan: 150 mm Gerakan balok: 120 mm Kontrol CNC: TRUMPF TASC 6000 / Touchpoint TruBend Sumbu belakang: 6-sumbu (X, R, Z1, Z2, Y1, Y2) Kecepatan kerja: 25 mm/dtk Lsdpfsx Apgvex Ac Hehc Kecepatan balik cepat: 220 mm/dtk Data teknis Jarak antar tiang: 932 mm Tinggi instalasi: 2390 mm Tinggi meja: 955 mm Jangkauan sumbu belakang X: 600 mm Jangkauan sumbu Z: 0–1020 mm Berat: 2600 kg Daya terpasang: 7 kW Catu daya: 400 V

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Gebrauchte Haeger 412 Einpressmaschine Blech-Einlets, Bolzen & Muttern – Selbstsichernd zu verkaufen. Inklusive Werkzeug und J-förmigem Unterwerkzeug. Lhsdpfx Acswbhipj Hec

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 11.500 h, nomor mesin/kendaraan: 3098, jam kerja laser: 6.900 h, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, daya: 10 kW (13,60 hp), tahun perombakan terakhir: 2024, jangkauan kerja: 4.020 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series, equipped with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW power Technical data: Machine model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guideways: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Ljdpfxevw Tdlo Ac Hshc Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic tool measurement Pneumatic hold-down device Chip removal brush Donaldson® filter unit DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer The machine has always been operated with a maintenance and support contract.