Kantilever kantilever

Cantilever BI-front

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads Djdpfx Ajx Diqwsaqekl X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h

Kondisi: bekas, Tahun pembuatan: 1999, daya: 3 kW (4,08 hp), tegangan masuk: 400 V, ketinggian potong (maks.): 200 mm, diameter mata gergaji: 520 mm, berat keseluruhan: 350 kg, panjang pemotongan (maks.): 420 mm, diameter pemasangan: 50 mm, penggerak gergaji: 3.000 W, 04511 Crosscut and Mitre Circular Saw Graule ZS 200 N Used, year of manufacture 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Borehole diameter: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminum fence With machine stand and rear hand crank for tilt adjustment Hydraulic feed brake Pneumatic material clamping, double-sided from above Saw blade spray system for coolant or lubricant Carbide-tipped circular saw blade for aluminum and plastics, diameter 520 mm Roller conveyor, type RLK, 4000 mm, with foldable material stop and scale Roller conveyor 4000 mm after the saw Dkedpfx Asyh Nfuoaqol Roller conveyor width: 350 mm Transport dimensions of the machine approx. 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. No warranty is given for used machines; the following applies: 'purchased as inspected.' Terms of payment: Prices plus statutory VAT. Payment before collection or dispatch. Delivery terms: ex stock.

Kondisi: baru, Tahun pembuatan: 2025, 1. Effektive Rohrlänge für den Schnitt: 6.500 mm / 9.200 mm Laserleistung: 6.000 W / 3.000 W / 2.000 W / 1.500 W Effektiver Schneiddurchmesser Rundrohr: Ø20–230 mm Effektiver Schneiddurchmesser Vierkantrohr: 20×20 mm – 160×160 mm Kantenlänge: 20–170 mm Außendurchmesser: ≤230 mm Zertifikate: CCC, CE, GS, ISO, SGS Laserquelle: IPG/MAX Garantie: 3 Jahre Stromversorgung: 110V/220V/380V, 50Hz/60Hz Dkedpfx Aaeg Dgbhjqsl 1. Überragende Kapazität Der maximale Schneiddurchmesser der T-Serie ist 30 % größer als bei marktüblichen Maschinen; das maximale Schneidgewicht liegt 100 % über dem marktüblichen Standard. 2. Spannfutter-Positionskontrolle, Drehmomentregelung Das CNC-selbstzentrierende Spannfutter mit firmeneigenem Patent kann das Werkstück automatisch entsprechend der eingegebenen Rohrabmessungen spannen. Die Positionsüberwachung im Drehmoment-Modus garantiert, dass dickwandige Rohre sicher gespannt bleiben und dünnwandige Rohre nicht verformt werden. Neues staubgeschütztes Design für langanhaltenden, störungsfreien Einsatz. 3. Kanten- und Mittelpunktfindung Neue Funktion zur automatischen Kanten- und Zentrumserkennung. Die optimierte Kantenfindung und der verbesserte Algorithmus gewährleisten höchste Schnittpräzision und -stabilität.

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg Dodpfx Aaou R Szajqokl The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. - New exhibition machine -

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Schüco glazing bead saw is available. Saw blade diameter: 400mm, cutting angle: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Dedpowu Ez Nsfx Aaqekl

Kondisi: baru, es Dkedpfxjdy Hm Ds Aaqel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Dsdpfx Aoucfwpsaqokl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. Dkedpfx Ajh Ek Daoaqol The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: baru, As well as other types, as a package. Dedpjf Ddzqjfx Aaqokl

Kondisi: baru, Load capacity: 5.0 t Workpiece diameter: 100 - 2500 mm Total connected load: 2 x 0.37 kW Drive unit payload max.: 2500 kg Idler unit payload max.: 2500 kg Table rotation speed: 100 - 1000 mm/min Dkedpfx Aogvwgcoaqel Wheel diameter: 250 x 140 mm Machine weight approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Includes remote control (wired)