Mesin pembuat sekrup

CARLO SALVI PSV

Kondisi: bekas, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Quill stroke: 170 mm Table clamping surface: 730 x 590 mm Spindle speed: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: MT 4 Total power requirement: 1.8 kW Machine weight approx. 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drill press equipped with: - Automatic feed - 2 gearbox speeds - Forward/reverse operation Bjdpfx Ajwn T A Uoa Teld - Foot switch - Machine lamp

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. Blodoph Uk Njpfx Aa Tjd - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, Tahun pembuatan: 1994, en-GB-001 Bodpel Su Rxofx Aa Tsld

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 03.2456, CNC internal broaching machine Arthur Klink Bodpfx Asirwiqja Tjld RISH 6.3X1000X400 Refurbished in 2016

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Bedpfx Aaot Hw N Te Teld Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 39035,

Tahun pembuatan: 1988, Kondisi: baik (bekas), Carlo Salvi, modelo 780/SV, cabezal de una matriz y dos golpes. Diámetro máximo de corte: 6,35 mm. Longitud máxima de corte: 97 mm. Longitud máxima de expulsión (lado de la matriz): 80 mm. Velocidad máxima: 360 piezas por minuto. Bedpfxohrdmxo Aa Tsld

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, panjang poros di bawah kepala: 30 mm, panjang bagian (maks.): 52 mm, Hilgeland CH1 KHA Double-Action Press Year of manufacture: 1970 The machine is ready for immediate use! Blsdpjur N Daefx Aa Tjd

Kondisi: baru, Tahun pembuatan: 2024, panjang poros di bawah kepala: 80 mm, panjang ulir: 55 mm, kecepatan perjalanan (maks.): 480 mm/menit, EW MENN GW63 Flat Die Thread Rolling Machine Fully overhauled to as-new condition. Fitted with new guides, new vibrator, and new vibrating discharge chute. New electrical system with inverter and PLC. Thread size: M8 x 80/55 mm. Production rate: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Bedpfxet Uucae Aa Teld Die length: 115 / 130 mm. Available for inspection and testing at HBR srl - Calolziocorte (LC), Italy.

Kondisi: baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, COLD FORGING HEADER, 2-BLOW NATIONAL M5 Suitable for the production of semi-pierced parts Fully operational Recently overhauled! Number of dies: 1 Output: 300 pieces per minute Maximum rivet length: 20 mm Maximum piercing depth: 5 mm Cutoff diameter: 5 mm Floor space (width): 1,300 mm Floor space (length): 2,690 mm Main motor power: 7.5 kW Net weight: 3,100 kg Bjdpfx Aaotxni Ne Tjld Gross weight: 3,700 kg