Pengujian tekanan kepala silinder & blok

Carmec Kwik-Way Comec Serdi Sunnen A-M CCT1600L A-M Nyomáspróbázó gép

Kondisi: baru, Tahun pembuatan: 2025, The XTON Smart Cleaner SC1000™ Automatic Basket Cleaning System is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in a variety of industries and in the automotive sector. The cleaning unit is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned components. Cleaning efficiency is maximised by our proprietary XPOWER Active Cleaner BA fluid, which, combined with optimal temperature and pressure, effortlessly removes all types of contaminants. The system operates in a closed circuit at temperatures of up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-litre tank, which can optionally be thermally insulated to prevent rapid cooling of the liquid. The Smart Cleaner SC1000™ delivers high cleaning quality, time and energy savings, as well as safe and convenient operation. The cleaning system is engineered for the automatic removal of contamination from surfaces made of cast iron, aluminium, and steel. The design and construction of the Smart Cleaner SC1000™ comply with the highest quality standards ISO 9001 and environmental standards ISO 14001. FEATURES: - Rotating basket with 100 cm diameter - Heated tank with 300-litre capacity - Dual liquid filtration system - Level and temperature sensors - Oil separator - Height-adjustable feet (up to 100 mm) - XTON Active Cleaner BA (5-litre starter pack) TECHNICAL DATA: - Weight: 200 kg - External dimensions – open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions – closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Basket load capacity: 300 kg - Adjustable working time: 0 - 99 min - Wash/liquid temperature: up to 80°C - Heating power: 9 kW - Tank volume: 300 L - Tank volume up to oil separator: 200 L - Pump capacity: 250 L/min Hedpfx Aaeu R Urhsbjff - Spray pressure: 4.5 – 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency stop switch, limit switch - Degree of protection: IP 54 - Declaration of conformity: CE

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, Hsdpfx Ask Hdu Djabjff partial enclosure, coolant tank, manual

Tahun pembuatan: 1987, Kondisi: sangat baik (bekas), en-1 Stück Chemie Normkreiselpumpe mit sehr wenig Betriebsstunden. Pumpe ist geeignet für Sauerkondensat und aggressive Säuren. Auch Salzwasser geeignet!! Hersteller: Sulzer Modell: ZA 200-4500 Werkstoff: Duplex 9.4460 / Noridur 1.4593 Fördervolumen: 250m³/h Förderhöhe: 27 Meter bei 980 U/min Wellenleistung: 42 kW Motorleistung: 75 kW NPSH: 1.6 Drehzahl: 980 U/min Baujahr 1987 Pump speed of 1480 rpm is also possible!! Approximate performance at 1480 rpm (data without guarantee): Flow rate: 430 m³/h Hedpfxsh S Nz Se Aabsff Head: 62 m Shaft power: 88 kW Stainless steel shut-off valves and pipelines are also available The material 1.4593 Noridur is highly suitable for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and processing - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine engineering

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm Hfodpfx Ashzbipoabjf DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 3.300 h, - BEKAS - PUSAT PEMESINAN HORIZONTAL 4-SUMBU DENGAN PENUKAR PALET PERGERAKAN SUMBU-X: 1050 mm PERGERAKAN SUMBU-Y: 900 mm PERGERAKAN SUMBU-Z: 1000 mm JARAK UJUNG SPINDEL-MEJA: 100 - 1100 mm GERAK CEPAT X-Y-Z: 60 m/menit Hfsdexvfuvopfx Aabjf SPINDEL: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALET: JUMLAH 2; KONTINU; 630x630 mm BEBAN MAKSIMUM DOPERPANKAN: 1500 kg MAKS DIMENSI BENDA KERJA: ø1050 x 1350 mm MAGAZIN ALAT: TIPE RANTAI; 90 POSISI UNIT KONTROL: FANUC 31i BERAT: 18000 kg DIMENSI KESELURUHAN: 6520 x 3930 x 3495 mm AKSESORIS: KONVEYOR SERPIHAN; PENDETEKSI ALAT

Tahun pembuatan: 2020, Kondisi: siap digunakan (bekas), A compressor system from plant manufacturer Rico, comprising two Atlas Copco compressors, two refrigeration dryers, and an oil-water separator system (Beko), also from Atlas Copco, is available. 1) Atlas Copco GA 45 VSD+ screw compressor, year of manufacture: 2020, air flow: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200 mm / 1100 mm / 2000 mm, weight: approx. 860 kg. 2) Atlas Copco GA 45 VSD FF screw compressor, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x Atlas Copco FX 15 refrigerated compressed air dryers, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant charge: 2050 g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900 mm / 750 mm / 1000 mm, weight: approx. 160 kg. 4) Atlas Copco Equalizer 4.0/ES6-MK5 compressor management system, control capacity: 2–6 compressors. 5) Beko ÖWAMAT 15 oil-water separator, throughput capacity range: 6 m³–30 m³/min, oil outlet: DN40, tank volume: 115.5 l, filling volume: 84.3 l, oil collection container: 2x10 l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100 mm / 550 mm / 800 mm, weight: approx. 40 kg. Plant operating hours: 8,656 h, controller hours: 42,334 h. Documentation available. On-site inspection possible. Hedpfoxdc Uvsx Aaboff

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 04/2027, jenis arus masuk: AC (pendingin udara), nomor mesin/kendaraan: 2026, Unox Bakerlux 3 Shop.Pro Touch Oven Pemanggang Baru BARU BARU BARU BARU BARU BARU BARU BARU BARU Hedpexmrkxsfx Aabeff Unox Oven konveksi untuk 3 loyang ukuran 600 x 400 mm Konstruksi stainless steel dengan kaca depan Pintu oven dibuka manual ke depan-bawah Panel sentuh dengan pengelolaan program Pengaturan suhu hingga 260°C Pasokan uap (steam injection) melalui sambungan air tetap Oven konveksi bertenaga tinggi Koneksi 230V dengan steker Ukuran: 800 x 811/860 x 425 mm (PxLxT) Oven baru, telah diuji SAB Termasuk garansi & layanan suku cadang Kualitas dari mitra resmi Unox! Manfaatkan pengalaman lebih dari 35 tahun! Kunjungi Unox baking center kami!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 30.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, dehu1930pro Hfjdpfxow Rdl Dj Aabjf

Kondisi: bekas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel path X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] Hedpfx Aajw Ephbsbsff SWIVEL AXIS B - Travel path: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5,000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2,500 [mm] - Max. workpiece height: 1,850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] OPERATING HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 - Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinsing gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probe system - Workpiece probe system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vice - Tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 Contour Control – Excellent Condition, CE Compliant, from Training Workshop! Technical Specifications: - Year of manufacture: 2010, Machine No. 347283 - Rigid angle table - Spindle speed: infinitely variable up to 4,500 rpm - Variable feed rate in 3 axes: 0 to 2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm Hfjdpfx Aasxuppuebof - Vertical and horizontal quill – ISO 40 - Hydraulic clamping system - Weight approx.: 1,800 kg - Space requirement approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Equipment and Accessories: - Heidenhain TNC 320 contour control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, operator manual for the control system, and programming examples - Handwheels - Coolant system - Electronic handwheel HR410 About the Machine: Offered is a Kunzmann WF4/3 universal tool milling machine equipped with a Heidenhain TNC 320 contour control. This universal milling machine is in excellent condition with very few operating hours. It comes from a facility where it was solely used for training purposes. The control system is user-friendly and intuitive. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is fast and easy thanks to the swiveling vertical head. The guideways are automatically lubricated by the central lubrication system. The Kunzmann machine has undergone mechanical and electrical inspection at our facility. You are welcome to visit us and test the machine under power on-site. There are 7 pieces of Kunzmann WF4/3 milling machines with TNC 320 Heidenhain control available. The machines are immediately available.