Set pin uji

Cary 3,01 - 3,49 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, produsen pengendali: FANUC, diameter benda kerja (maks.): 32 mm, kecepatan rotasi (min.): 500 rpm, kecepatan rotasi (maks.): 30.000 rpm, berat keseluruhan: 1.700 kg, hidung spindel: HSK-E40, jumlah slot dalam magazin alat: 48, panjang alat: 95 mm, diameter alat: 63 mm, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, 5-axis CNC machining center WILLEMIN MACODEL W408 MT TECHNICAL DATA Year: 2007 CNC Type: FANUC 16i-MB Number of axes: 5 X-axis travel: 250 [mm] Y-axis travel: 200 [mm] Z-axis travel: 300 [mm] Rapid traverse X, Y and Z: 30,000 [mm/min] Max. bar diameter at turning spindle: 32 [mm] Max. speed turning spindle: 6,000 [rpm] Max. power turning spindle: 3.7 [kW] C-axis rotary range: 360 [°] B-axis angular range: 115 [°] Spindle interface: HSK-E40 Min. spindle speed: 500 [rpm] Max. spindle speed: 30,000 [rpm] Spindle power: 10 [kW] Number of tool magazine positions: 48 Max. tool length: 95 [mm] Max. tool diameter: 63 [mm] Coolant tank capacity: 80 [l] Coolant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Weight: 1,700 [kg] INCLUDING EQUIPMENT: x1 0-90° swiveling rear machining unit (6-sided machining) x1 rear machining chuck x1 RENISHAW TS27R tool probe Gtjdpfx Abewu Ruhsheu x1 RENISHAW NC4 TX laser system for tool measurement and tool breakage monitoring x68 collets type F35 for turning operations x9 HSK-40E milling/turning units x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 coolant chiller x1 ELBARON mist collector x1 3-color status indicator lamp x1 CO2 automatic fire extinguishing system (to be inspected by the buyer with an authorized authority) x1 set of technical manuals Price on request, loaded on truck included. Worldwide shipping possible. The information on this page has been compiled to the best of our knowledge and belief. Therefore, its accuracy cannot be guaranteed. HERMLE, DMU, Monoblock, variaxis, chiron

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), The manual cleaning is carried out using special gloves in the front section. The cleaning effectiveness is ensured by a high-pressure pump and a special spray nozzle. The liquid temperature can be set up to 60°C in these units. The operating pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1 to 80 bar Tank capacity: 75 liters / Heating capacity: 2 kW Standard features: • Frame, legs, lid, and housing made of stainless steel • Removable stainless steel panels above the tank • Upward-opening lid with two hand ports and gloves • Hardened glass viewing window • Door opening/closing system supported by gas springs • Door opening monitored by safety limit switch • Pump-side inlet filter (500 micron) • Foot switch for activating the cleaning pump • Interior lighting • 600 mm neoprene gloves (chemical resistant) • Adjustable feet +/- 50 mm Godpfx Ajf A Nq Ajbhstu Options: • Stainless steel cartridge filter with pump (10/25/50 micron) • External mini pneumatic oil separator

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 200 mm, rentang pengukuran sumbu Y: 200 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 200 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 200 mm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Refurbished Mahr MS 222 Multisensor Measuring Device (Optical Measuring Instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. Gtsdpfx Aoglp Nqjbhju INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or forwarding company, worldwide shipping possible! Online demonstrations or optionally on-site demos with customer parts, technical application advice provided by accredited Profitech measuring laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training programs also bookable as online courses. Rental, leasing, or financing available directly via Profitech without financial institutions. Measuring device can be configured to customer requirements. Measuring range: 200 x 200 x 200 mm Loading weight (glass plate): 10 kg Scale resolution: 0.1 μm Max. traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) on request Retrofit 2025 Including PC and software Maximum traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Manufacturer’s sample image *Commissioning, on-site calibration, and training not included

Kondisi: baru, Tahun pembuatan: 2026, The ERBA separation line YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile stand-alone unit or in combination with other machines, such as the ERBA Turbo (centrifugal finishing unit). The separation deck can be changed quickly and easily depending on requirements. Optionally, a frequency converter can be installed to enable stepless adjustment of the motor speed. The YE-60 can be equipped with numerous optional features to simplify the separation process, such as a magnetic separator for small parts, a washing nozzle, or a parts bunker. Technical Data: - Gross volume: 60 L - Motor power: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1,185 x 540 x 575 mm (length x width x height) As an experienced partner, we provide you with expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to ensure optimal process results. All prices are net plus the applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR). This listing is for the sole purpose of presenting our goods on the internet. The contract negotiation is conducted via telecommunications (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and cancellation policy before any purchase or contract is concluded. Gtjdpfx Aon Ut N Hsbhou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Gtsdowv Hnmspfx Abhju Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Translation into English: x-axis travel: 400 mm y-axis travel: 450 mm Gtodpfoxfb E Asx Abheu z-axis travel: 350 mm Control: Heidenhain iTNC 530 Tool changer: 68 positions Tool holder: HSK 40E Spindle speed: 30,000 rpm Fixed table - table size: 300 x 400 mm Workpiece weight: 200 kg Pallet table size: 320 x 320 mm Rapid traverse (x/y/z): 40 m/min Spindle drive motor: 13 kW Operating hours: 32,369 h Total power requirement: 16 kW Machine weight: approx. 7,500 kg High-speed 3-axis universal machining center with 7-position pallet changer. Operating hours: 44,899 h; Load hours: 32,369 h; Spindle hours since replacement: 13,350 h. Accessories: 1 BURN chiller, 1 Keller L-Cut extraction system (year 2012), PS 32 setup probe, and tool air blow-off device. Portal-type machine frame in heavy-duty monoblock polymer concrete construction, compact linear ball guides, direct Heidenhain measuring system, hydraulic unit for tool and pallet clamping, digital drives with liquid-cooled Siemens AC servomotors. This is a used machine; therefore, we sell under exclusion of any warranty. STOCKING DEALER WITH A 1,600 m² EXHIBITION HALL.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 3.800 h, Fungsionalitas: berfungsi sepenuhnya, Tahun 2022 – 3800 jam MultiSwiss 8x26 6-sumbu Y 8 spindle utama 11 kW – 8000 rpm maks Kapasitas spindle 26 mm, langkah Z 75 mm (maks. ukuran benda kerja 65 mm). 2 slide X di posisi 1 - 8, langkah 80 mm 6 slide X-Y di posisi 2-3-4-5-6-7, langkah X 55 mm, Y +/-16,5 mm Counter-spindle 11 kW – 8000 rpm maks, langkah Z 150 mm, X 170 mm Adaptor HP ejector untuk counter-spindle (membutuhkan 3010 atau 3020) Kontrol numerik Fanuc 30iB PC terintegrasi dengan sistem operasi Windows 10 Layar sentuh warna 21,5" Sumbu C independen pada setiap spindle untuk operasi utama dan sekunder Gtodpfx Abjxrfunshju (membutuhkan 0060 atau 0065 atau 0070 atau 0075)

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20250108, tinggi total: 2.200 mm, berat keseluruhan: 700 kg, panjang total: 1.700 mm, lebar total: 1.300 mm, jenis arus masuk: tiga fasa, berat benda kerja (maks.): 75 kg, kapasitas tangki: 120 l, kapasitas tangki yang dapat digunakan: 60 l, tegangan masuk: 400 V, kecepatan rotasi (min.): 50 rpm, kecepatan rotasi (maks.): 180 rpm, daya: 4 kW (5,44 hp), arus masuk: 16 A, masa garansi: 12 bulan, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The Turbo-Line 120 “S” model features a stainless steel discharge chute, which is mounted directly onto the deburring machine. When the bowl is lowered, chips pass through a screen, while the parts to be deburred remain on top. This Turbo-Line machine is equipped with a 120-liter drum with vertical, straight sides and a separate bottom section which rotates at an adjustable speed, typically between 115 and 135 rpm, but can be set anywhere from 50 to 180 rpm. During operation, the abrasive media inside the bowl create a uniform, spiral motion reminiscent of a twisted sausage. All areas of the machine that come into contact with the product, including the drum and base, are coated with at least 26 mm of yellow polyurethane (PU) to ensure long service life. The 120-liter process container can handle up to 50-60 liters of product per batch, depending on the shape and size of the parts. Deburring parameters such as time and speed are individually set via a manual touchscreen controller. Water and compound are added through a manually adjustable ball valve, which is included in the scope of delivery. Gtodpfx Asvvu Snjbheu Finished products are discharged by tilting the bowl, a process controlled via the touchscreen. The discharge speed is also adjustable on the touchscreen via the frequency inverter.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Manual cleaning is carried out using specialized gloves in the front section. The effectiveness of the cleaning process is ensured by a wash pump with an adjustable pressure of 0-8 BAR and a special spray nozzle. The devices allow the cleaning fluid temperature to be set up to 60°C. Pressure is adjustable between 0-8 Bar. Technical Data: Gsdpfx Aber Hm R Tehetu Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Spray pressure: Adjustable from 0-8 Bar Tank capacity: 75 liters / Heating power: 2 kW Standard Equipment: • Blow-off gun inside the unit • Frame, feet, lid, and housing made from stainless steel • Removable stainless steel covers above the tank • Upward opening lid with two hand ports and gloves • Hardened glass viewing window • Door opening/closing system with gas strut assistance • Door opening monitored by safety limit switch • Filter on the suction side of the pump (500 micron) • Foot switch for activating the cleaning pump • Interior lighting • Neoprene gloves L 600 mm (chemical resistant) • Adjustable feet +/- 50 mm • Stainless steel cartridge filter with pump (10/25/50 micron options) • External mini pneumatic oil separator

Tahun pembuatan: 2001, Kondisi: baik (bekas), Travel paths X / Y / Z: 220 x 150 x 150 mm Z-axis device: Standard equipment (= 5th axis) Max. taper angle: 15° (for 100 mm thick workpiece) Taper cutting device: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 44143 Dortmund - Wambel Gtsdpsg Icdyjfx Abhju