Pusat penggilingan balik CNC
Willemin Macodel W 408B

Name: Willemin Macodel W 408B
Brand: Willemin Macodel
Availability: InStock

Tahun pembuatan

2011

Kondisi

Bekas

Lokasi

Zuchwil

Pusat penggilingan balik CNC Willemin Macodel W 408B

Tampilkan peta

Data mesin

Nama mesin:: Pusat penggilingan balik CNC

Pabrikan:: Willemin Macodel

Model:: W 408B

Tahun pembuatan:: 2011

Kondisi:: sangat baik (bekas)

Harga & Lokasi

Lokasi:: Niedermattstrasse 3a, 4528 Zuchwil, Schweiz

Hubungi

Rincian penawaran

ID iklan:: A19457386

Pembaruan:: terakhir pada 29.06.2025

Deskripsi

TECHNICAL DATA

Linear Axes (Slides X, Y, Z)

Travel Paths: X axis: 250 mm
Y axis: 200 mm
Z axis: 300 mm
Rapid Traverse: X, Y, Z: 30 m/min
Feed Force: X, Y, Z: 3,700 N
Resolution: X, Y, Z: 0.0001 mm

Rotational Movement of the Motor Spindle – B Axis

Rotational Range: -15 – 100°
Rotational Range (with tailstock):
Tailstock in position: -20° to +45°
Tailstock removed: -20° to +90°
Max. Speed: 20 rpm
Drive Torque: 750 Nm
Hydraulic Clamping: 50 bar
Holding Torque: 300 Nm
Resolution: 0.0001 mm

Milling Motor Spindle HSK E40

Power at 100%: 10 kW
Power at 25%: 15 kW
Rated Torque: 100%: 8 Nm
25%: 12 Nm
Speed Range: 50 – 30,000 rpm

A Axis (Bar Capacity Ø 40 mm)

Spindle Type: A4
Max. Bar Diameter: 40 mm
Max. Speed: 35 rpm
Drive Torque: Nominal: 112 Nm
Max: 238 Nm
Resolution: 0.0001°
Axis Clamping (A Axis): Pressure: 70 bar
Holding Torque: 130 Nm

Tool Changer

Number of Tool Disks: 2
Positions per Disk: 24
Max. Tool Weight: 1 kg
Gtodswv Hnmopfx Adtot
Rotation Speed: 60 rpm
Max. Tool Diameter (adjacent positions occupied): 50 mm
Max. Tool Diameter (adjacent positions free): 63 mm
Max. Tool Length (from spindle nose): 95 mm

Secondary Slide

Travel Path: 80 mm
Feed Force: 1,700 N
Tilting Moment: 90 Nm
Resolution: 0.0001°
Hydraulic Pressure for Tilting: 100 bar

Workpiece Manipulator

Pneumatic Vertical Slide Gate: Ø: 25 mm
Stroke: 710 mm
Linear Stroke per Motor Revolution: 70.4 mm/rev
Max. Transfer Speed: 60 m/min
Max. Workpiece Weight: 5 kg
Max. Manipulator Stroke: 1,120 mm (2×560 mm)
Max. Vertical Stroke: 150 mm
Part Intake Ø / Length: Ø 32 mm / 100 mm
Part Ejection Ø / Length: Ø 32 mm / 100 mm
Accuracy: +/- 0.05 mm
Grip Force: 45 N (at 6 bar)
Max. Gripper Opening: 14 mm (2×7 mm)

Pneumatic Equipment
Operating Pressure: 6 bar

Hydraulic System
Operating Pressure: 95 – 105 bar

Coolant System
Coolant Tank Volume: 80 liters
Chip Tray Volume: 30 liters
Kinematic Viscosity in Operation: 10 – 15 cST

SCOPE OF SUPPLY

Including, but not limited to:

- Willemin Macodel W 408 B Machining Center
- Extraction unit
- Fire extinguishing system
- Probe
- Coolant system
- Oil cooler
- Data backup
- Complete operating documentation
- Exact scope of supply as per photo series

No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

19457386-01.pdf

Penyedia

Terdaftar sejak: 2018

82 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+41 32 58... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Pusat pembubutan/penggilingan WILLEMIN MACODEL W408B

Contamine-sur-Arve

11.428 km

Pusat pembubutan/penggilingan
WILLEMIN MACODELW408B

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 1 MAIN SPINDLE - Max. bar diameter: 23 mm - Minimum resolution C-axis: 0.001° TURNING-MILLING SPINDLE - Travel X/Z: 250/300 mm - Travel Y: 200 mm - B-axis stroke: -15°/+100° - Minimum resolution B-axis: 0.001° - Tool type: HSK E40 - Spindle speed: 30,000 rpm - Spindle drive power: 10 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 24 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 1,700 kg EQUIPMENT - Control system: NUM 1050 - Coolant tank * Internal coolant supply (IKZ) - Oil mist extraction: Elbaron RON/A 60 - Coolant container: MARKSA CSW100 - Unit for 6th side machining - Bar feeder: Willemin Gjdsvh I Ugjpfx Adtjtt - Collet chuck

Lihat detail

Iklan kecil

Hornberg

11.241 km

Mesin bubut tipe Swiss
TraubTNL20

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock / fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Gedpfx Adswuddvstjtt Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back-working attachment Toolholder stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle capacity mm 20 Max. speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system basic unit Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x width x height mm see installation plan* Weight kg 5,000* Connected load kW 40 (47 kVA)

Lihat detail

Iklan kecil

Mesin pengukur koordinat, mesin ukur Profitech Technologies Innometrik Advanced 564

Saarbrücken

11.313 km

Mesin pengukur koordinat, mesin ukur
Profitech TechnologiesInnometrik Advanced 564

€28.500

VB ditambah PPN

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Gjdpfedyah Sox Adtjtt Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Lihat detail

Iklan kecil

Mesin penggiling roda gigi REİSHAUER RZ701

Bursa

9.639 km

Mesin penggiling roda gigi
REİSHAUERRZ701

Hubungi

Iklan kecil

Pusat mesin WMW HECKERT HEC 800 Athletic

Mamer

11.364 km

Pusat mesin
WMW HECKERTHEC 800 Athletic

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Control system: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant supply through spindle Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Gtsdsvgxfyepfx Adtet Spindle extension by 100 mm Electronic handwheel Machine is supplied with many tools.

Lihat detail

Iklan kecil

Székesfehérvár

10.494 km

Machining Center
MatsuuraLV-500

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, jam operasional: 132 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20731, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 90 m/menit, pergeseran cepat sumbu Y: 90 m/menit, pergerakan cepat sumbu Z: 90 m/menit, daya nominal (semu): 35 kVA, produsen pengendali: Fanuc 31I, kecepatan spindel (maks.): 42.000 rpm, jam operasional spindle: 132 h, pasokan pendingin: 20 batang, daya motor spindle: 15 W, hidung spindel: HSK E40, tegangan masuk: 415 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/- 0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoption auf Fanuc ist vorhanden. Die Maschine kann unter Strom besichtigt werden. Gjdevcfi Djpfx Adtett

Lihat detail

Iklan kecil

Mesin penggiling silinder cnc STUDER S36 CNC

Contamine-sur-Arve

11.428 km

Mesin penggiling silinder cnc
STUDERS36 CNC

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of Axes: 3 - Centre Height: 175 mm - Distance Between Centres: 1000 mm LINEAR AXES - Grinding Length: 500 mm - Travel X x Z: 267 x 650 mm GRINDING SPINDLE HEADSTOCK - Continuous Orientation: +/-8.5° - External Grinding Wheel Dimensions: 500 x 80 x 203 mm - Grinding Wheel Holder Spindle Headstock Power: 7.5 kW Gtsdpfx Asuhbydjdtet - Cutting Speed: 44 m/s WORKPIECE SPINDLE HEADSTOCK - Taper Type: MT5 - C-Axis: +/-0.5° - Power: 1 kW - Rotational Speed: 30–1,000 rpm TAILSTOCK - Taper Type: MT3 - Quill Stroke: 35 mm - Quill Diameter: 50 mm - Max. Workpiece Weight Between Centres: 130 kg ELECTRICAL SUPPLY - Supply Voltage: 400V 50 Hz - Machine Dimensions: 2700 x 2350 x H. 2100 mm - Weight: 4,000 kg OPERATING HOURS - Operating Hours: 17,775 h ACCESSORIES - CNC FANUC 16i-TA Control - Pictogramming - Studer RELEASE C - Remote Control with Electronic Handwheel - SENSITRON - Hydrobalance HBA 40000-1 Dynamic Balancing Device - MOVOMATIC C25 Automatic Length Probing Arm - MOVOMATIC In-process External Diameter Measuring Arm - Grinding Wheel Guard with Automatic Tilting - Fixed Diamond Dressing Device on Workpiece Spindle Headstock - Coolant Tank: 375 l - Paper Filter - Oil Mist Extraction - Grinding Wheel Flange Holders

Lihat detail

Iklan kecil

Contamine-sur-Arve

11.428 km

Mesin bubut tipe Swiss CNC
TORNOSDT 26

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB OPERATIONS - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY Gtjdpfxjuha U Ho Adtst - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [h] - Operating hours: 28,118 [h] - Spindle hours: 15,281 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Driven tool motorization at: S11, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Lihat detail

Iklan kecil

Mesin bubut tipe Swiss CNC TORNOS EvoDECO 16/10

Bienne

11.333 km

Mesin bubut tipe Swiss CNC
TORNOSEvoDECO 16/10

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 5.650 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar feeder Fanuc 31iB - 5,646 operating hours Country of manufacture: CH Voltage: 400V Dimensions: 2135x1250x2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Maximum bar diameter: 16 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool Station 1 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Tool Station 2 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Godpfx Aokhnqgjdtott Endworking Unit Number of positions: 4 Number of driven positions: 3 Driven tool speed: 8,000 rpm Backworking Number of positions: 6 Number of driven positions: 6 Driven tool speed: 8,000 rpm Electrical supply Line voltage: 400V Technical data is provided without obligation; errors and omissions excepted.

Lihat detail

Iklan kecil

Schömberg

11.203 km

Pusat mesin
HERMLEC30 U

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 119.571 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, pergerakan cepat sumbu Z: 45.000 m/menit, model controller: Siemens 840 D, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, hermle-c30u-en Gtodpfx Aexcp Srsdtet

Lihat detail

Beriklan di sini