Sander sabuk lebar

Casadei LIBRA 35/2 RTC 110

Kondisi: baru, Tahun pembuatan: 2026, CASADEI Libra 35 - Wide Belt Sander, Twin-Belt Configuration Available immediately - Ex-stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 /170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33/0.55 kW Table elevation motor output: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/Depth: 1820 mm Height: 1960 mm Image shows optional equipment Wide belt sander in twin-belt design up to 1100 mm with a wide range of options—ideal for cost-conscious craft businesses Robust, tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity Operator-friendly, clearly arranged control panel on the front Electrically powered table height adjustment Digital display for working height Electronically controlled belt oscillation with reduced compressed air requirement Automatic star-delta main motor start Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt driven by geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Quality – made in Europe RTC Version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit: combination unit with finely adjustable working height for calibration and fine sanding, featuring a rubber-coated roller Ø 120 mm (45 Sh) and hard sanding pad with graphite insert on replaceable base Scope of delivery: Work table height adjustment with digital display Electronic sanding belt oscillation system Kdsdpecr S Ecsfx Aa Njg Rubber-coated grooved pressure roller at infeed 1st position with anti-reversal lock (C.E.) Star-delta main motor start Grooved calibration steel roller Selector switch for sanding pad positioning from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: Ex-stock Bitburg – special price

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Kjdpfx Aaod H Sc Eo Njdg Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: baru, Tahun pembuatan: 2025, Concept Easy adalah alat bantu pemasangan ideal untuk sambungan dowel saat pengepresan korpus serta saat pembuatan laci. Kdsdpfedx Daaox Aa Neg Ringkasan produk: • Membutuhkan ruang kecil, kurang dari 1,8 m2 • Potensiometer untuk pengaturan gaya tekan yang tak bertingkat • Gaya tekan minimum 300 daN (kg) • Gaya tekan maksimum 2200 daN (kg) • 3 kecepatan penekanan dan penyesuaian: 5 / 10 / 25 mm/detik (dengan posisi presisi / gerakan lambat) • Waktu tekan dapat diatur bebas dengan fungsi buka otomatis

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with error indication Infrared heating element CE compliant Note regarding used machines: • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! Kjdpfxsc Tmygj Aa Nedg • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, max. edge banding thickness 0.2 - 15 mm Feed speed 12 / 18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edging Granulate quick-heating tank End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / push buttons Extendable roller support Acoustic enclosure Machine length 3,800 mm Note on used machines: Kdodpfjfbr S Rsx Aa Njg • Technical data is subject to errors and prior sale. • Prices quoted are ex location - free loading! • The machine has been cleaned and functionally tested. • All machines are sold "as seen" without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid if made in writing. (We will only respond to enquiries that include your address and telephone number!)

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Kodpjgtm U Ajfx Aa Njdg Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: sangat baik (bekas), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (60 Sh roller, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extensions with 2 rollers, front and rear Sanding shoe inserts lined with new graphite cloth Including as-new sanding belts Incl. all documentation Note on used machinery: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-location – loaded free of charge! Kodpfsxqggcsx Aa Nedg • The machines have been cleaned and functionality tested. • All machines are sold as inspected, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines on-site. • Special agreements are only valid if made in writing. (We only respond to inquiries stating your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2023, Veneer Press OMC PL 105 LC 30/13 Water-Based Working area: 3000x1300 mm Opening width: 400 mm 6 cylinders, diameter 85 mm Total pressure: 105T Maximum heating temperature: 85°C Logic control system Kdjdpfx Aaoiypzlj Neg Machine operation via touch panel Readouts: temperature, pressing force, shelf opening time, loading area calculator, adhesive process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Kondisi: bekas, Tahun pembuatan: 2010, Touchscreen control for adjusting workgroups Panel thickness from 10 to 50 mm Solid wood 12 mm PVC/ABS from 0.4 to 3 mm Feed rate up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Electronically adjustable working height via CNC Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive unit Pre-milling unit with two 1.5 kW motors each Roll holder plate Kodpfx Aspzfcgsa Nedg COMBIMELT gluing unit for hot-melt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Fine milling unit with 2 motors Corner rounding unit Edge scraper unit Installed power 13.7 kW Machine length approx. 6170 mm TECHNICAL DETAILS TO BE VERIFIED

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Kdsdpfxjg A D Ane Aa Neg Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm