Penjepit gulungan kertas

Cascade VER935518SP-1

Kondisi: baik (bekas),

Kondisi: belum diuji (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, panjang bal: 1.000 mm, lebar bal: 750 mm, tinggi bal: 750.750.750 mm, berat bal: 500 kg, tegangan masuk: 400 V, berat keseluruhan: 7.500 kg, kapasitas tangki oli: 500 l, daya: 30 kW (40,79 hp), berat kosong: 7.500 kg, frekuensi input: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific pressing force: 5 kg/cm² Feeding channel: 1,000 x 720 mm (L x W) Theoretical throughput capacity: 200 m³/h Dedpsic Rl Djfx Abhjkh Bale size: 700 x 1,000 mm (W x H), length adjustable Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is currently removed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 21.676 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 750 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 25.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), berat kosong: 25.000 kg, laju aliran volumetrik: 930 m³/jam, tekanan kerja: 250 batang, Hello, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Pressing force (main press): 78 t Specific pressing force: 95 N/cm² Pre-press lid force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Dodpevgrh Ujfx Abhjkh Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank volume: 1,000 l Press dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The baler is in good condition, will remain in operation until January 2025, and can be inspected by appointment. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.080 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, lebar total: 3.450 mm, tinggi total: 4.090 mm, panjang total: 10.020 mm, tegangan masuk: 400 V, berat keseluruhan: 27.000 kg, tingkat kebisingan: 85 dB, tekanan: 300 batang, tinggi transportasi: 2.300 mm, daya: 37 kW (50,31 hp), nl-hu-001 Dkodpfsxl Rqbox Abhsh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, de Djdpfxew U Ddbs Abhskh

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Connected load: 15.5 kW, weight: 6.8 t. Dodpfx Aoip D Rzsbhokh

Tahun pembuatan: 1988, Kondisi: baik (bekas), Kompletter Atlas Copco Kompressor inklusive Donaldson Ultra-Filter und Behälter, in gutem Betriebszustand. Djdohpx U Aopfx Abhekh

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Dsdera Nrxepfx Abhjkh Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.000 kg, panjang total: 4.000 mm, lebar total: 3.000 mm, tinggi total: 1.500 mm, Slitter rewinder, can be used with a support roll winding system or as a standard non-contact winder, depending on the substrate and required web tension. - Used until the year 2000 and then extensively modernized - Upgraded electrical control equipment with Siemens S7 PLC - Modified winding drives with CT control Commander SE, both individually adjustable - Reversible winding drives (direction of rotation) - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding system, pneumatic sensor - Max. rewind diameter 500 mm 2 pcs. 3” winding shafts - Max. unwind diameter 1000 mm 1 pc. 3” unwind shaft - Pneumatically controlled unwinding brake - Cutting system: rotary knives (3 units available) - Hengstler running meter counter - Main drive, electronically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Siemens S7 PLC software file available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium, etc. - Required floor space minimum 4 x 3 m - Machine is dismantled and ready for shipment - Sale as seen - Packaging • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions unwinder (without slitting unit) • width 170 cm • length 220 cm Dsdpexbyf Hsfx Abhekh • height 110 cm • weight 490 kg - Dimensions slitting unit (without unwinder) • width 230 cm • length 140 cm • height 140 cm • weight 1490 kg - Control panel (including accessories) • width 70 cm • length 120 cm • height 120 cm • weight 240 kg

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Lamina System półautomatyczna laminarka SA 1416. W bardzo dobrym stanie technicznym, po generalnym remoncie. Maszyna podłączona pod zasilanie, możliwość testowania. Dkedpowz Ev Tofx Abheh Maksymalny format arkusza: szerokość: 1400 mm długość: 1600 mm Minimalny format arkusza: szerokość: 200 mm długość: 350 mm Arkusz górny: 130 do 450 g/m² 1 pts = 28,25 g/m² Arkusz dolny: ot 250 g/m² do 10 mm (0,39”) 1 pts = 28,25 g/m² tektura falista od 0,6 do 10 mm (0,016” - 0,39”) Automatyczny podajnik z ciągłym podawaniem arkuszy Maszyna oparta na sztywnej ramie wykonanej z anodowanych profili aluminiowych. Szerokość (z podestami) – 2350 mm, długość – 4600 mm.