Kipas ekstraksi debu 37 kW

CAT Blower IF

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, nomor mesin/kendaraan: fortlaufend, Centre height: 200 mm Centre distance: 1,000 mm Swing over bed: 400 mm Swing over cross slide: 220 mm Spindle bore: 52 mm Speed range: 9–1,600 rpm Spindle nose: Bayonet DIN 5027 KK6 Longitudinal feed range: 0.028 – 6.43 mm/rev (93 steps) Cross feed range: 0.012 – 2.73 mm/rev (93 steps) Metric threads: 0.5 – 224 mm (48 steps) Inch threads: 72 – 1/8 tpi (46 steps) Module threads: 0.5 – 112 (42 steps) Kodpfxo Nh Hxs Aayjdw Diametral pitch threads: 56 – 1/4 DP Quill diameter: 75 mm Quill stroke: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,100 kg Dimensions: 2,672 × 975 × 1,230 mm Equipment: Digital readout for 3 axes (SINO brand), 3-jaw chuck Ø 250 mm, 4-jaw face plate chuck Ø 400 mm, fixed and travelling steady rest, coolant system, splash guard, rapid traverse, manual central lubrication, 4-way tool post, work lamp.

Kondisi: diremajakan ulang (bekas), Druck: 150 t Stößelhub: 140 mm Tischgröße: 510 x 530 mm Kdsdpfx Ajgd H Tpoayow

Kondisi: baru, Tahun pembuatan: 2025, Centre height: 250 mm Spindle bore: 82 mm Centre distance: 2000 mm Swing over bed: 500 mm Swing in gap: 710 mm Kdsdpfxed I A Aus Aaysw Swing over cross slide: 300 mm Speed range: 9 - 1600 rpm (24 steps) Spindle mount: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,950.00 kg Dimensions: 3132 x 975 x 1270 mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s Kjdpfx Aaeph Uk Noysdw - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: bekas, AV-11841-Vertikal40m3Tank Kdsdpfx Aaoi E Abijyow

Kondisi: baru, Balkaya profile ring bending machine HBM 80 Technical Specifications: Tool holder, shaft: 80 mm Tool: 245 mm Working speed: 4.5 m/min Motor: 4 kW Kedpfxjh T Ulns Aayodw Hydraulics: 30 t Dimensions (L x W x H): 1450 x 1050 x 1800 mm Weight: 1400 kg 3 driven rollers Hardened standard rollers Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working positions Digital display Complies with CE standards

Kondisi: bekas, Tahun pembuatan: 2021, nomor mesin/kendaraan: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600 mm d) Open height 700 mm e) Overall dimensions approx. LxWxH 4500x2300x3700 mm f) Oil temperature display on the tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots as per customer specification, otherwise 22 mm i) Operation via swivel arm, mounted on the bridge j) Pressure adjustment from 50 T to 300 T via MONITOR k) Bridge traverses by two gear motors, via rack and pinion l) Cylinder traverses left and right via rack and pinion m) Machine body double painted Kdedpsh Agnuefx Aaysw n) Cylinder induction-hardened Design Type of press: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 sides Forces Max. pressing force: 3,000 kN Max. free peeling force: 500 kN Pressure build-up time closed tool steel on steel: Max. 3 sec Dimensions Max. opening 700 mm Stroke and min. opening: 700 mm/0 mm Table height above floor approx. 980 mm Height above floor (overall height) approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at max. closing force with 70% occupancy

Kondisi: baru, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Belt dimensions 150 x 2000 mm Kodpfsd Rw Rhex Aayedw Belt speed 14.5 / 29 m/sec Contact wheel Ø x width 200 / 155 mm Flat grinding table 460 x 150 mm Extraction nozzle Ø 100 mm Motor output (S1 100%) 2.1 / 2.8 kW Motor input (S6 40%) 2.8 / 3.6 kW Voltage 400 V Length 1080 mm Width 520 mm Height 1000 mm Weight approx. 85 kg

Kondisi: baru, Tahun pembuatan: 2025, The main features, functions, and advantages of the welding positioner are as follows: Functions: 1. Directional rotation switch: Allows control over the rotation direction of the positioner turntable. 2. Rotary direction selector switch: Enables changing the direction of the turntable’s rotation. 3. Stepless speed control of the turntable: This feature allows adjustment of the turntable's rotational speed to suit specific tasks. 4. Compact and robust design: The sturdy construction ensures the device’s durability and reliability. 5. Foot pedal control: Facilitates easy operation and control over the positioner. 6. Thermal fuse: Provides additional operational safety. 7. Brushed motor: The brushed DC motor is effective for various applications. 8. Tilt range of the turntable from 0 to 90°: The ability to tilt the turntable from 0 to 90 degrees is useful for welding in different positions. 9. Option for mounting a centering chuck: Allows for additional centering of workpieces. Advantages: 1. Increased work efficiency: The positioner helps boost productivity in assembly and welding processes. 2. Reduced production costs: Automating or facilitating the rotation of workpieces can contribute to lower production costs. 3. Repeatability of weld joints: The device ensures consistent quality and uniformity of joints. 4. Versatile application: Adjustable rotation speed and direction provide flexibility for various tasks. 5. Improved working conditions for welders: Enables more ergonomic and comfortable welding positions for the operator. Set includes: 1. PS-500 positioner unit 2. Foot pedal control 3. Power cord 4. User manual 5. Boom with welding torch holder The CORMAK PS-500 positioner is a valuable tool in industries requiring rotation and positioning of components, especially during welding processes. It helps enhance productivity, lower costs, and improve work quality. Technical specifications: - Maximum load: 300 kg - Table diameter: φ500 mm - Tilt angle: 0° ~ +90° - Rotational speed: 0.2 ~ 2.5 rpm - Rotational drive power: 200 W - Tilting: manual Kodpjrigmgofx Aayodw - Voltage: 220V-1PH-50Hz - Torch support: included - Dimensions: 700 x 650 x 710 mm - Weight: 97 kg *Three-jaw chuck is not included in the set.

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0116 - Rev.00, Pressure: 110 t Clear width: 1300 mm Stroke: 1500 mm Approx. machine weight (without operating fluids): 12 t Dimensions L x W x H: approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Kedpfx Aasdxvfljyedw Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other components colour: RAL 7021 Cladding and platform colour: RAL 1021 Motor power: 18 kW Max. rapid approach speed: 300 mm/sec Pressing speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200