Pistol semprot otomatis CEFLA KLEENSPRAY, dengan pita kertas, B

Cefla Kleenspray

Kondisi: bekas, Tahun pembuatan: 2005, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operator side: Right - Price for refurbished machine - Spray gun drive: dual-system - Height-adjustable spray units - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: approx. 6,500 m³/h - Paper tape transport system - Continuously variable feed speed: 1.5 – 7 m/min - PLC control with touch screen - Number of spray units installed: 0 - Number of paint pumps: 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,300 mm - Width: 3,360 mm + 1,850 mm - Height: 2,700 mm - Total connected load: approx. 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: In stock - Voltage fluctuations max. +/- 5 % ----- Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as operator training. Upon request, we also offer regular maintenance and servicing for the machine. For further information, please do not hesitate to contact us! Nedpfx Absxnbhvjvjcp

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank Ncsdpfx Abewka Upjvjp - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0, year of manufacture 2019. Configuration: - 1 pc. milling spindle, 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Nedpfx Asvx Dz Djbvocp Return system: draws the elements back to the operator or discharges them to the rear as a throughfeed machine. Element max. size: x 1250 x 50 mm Element min. size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Supplied with full documentation and CE certificate. Very good condition. Immediately available.

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm Ncjdpfxju Afu Ro Abvjp 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 Ncsdpfx Aeidi Ivsbvjp • CSD system • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit • Ionization

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Ncjdpfx Aehlp Efsbvsp

Kondisi: baru, Tahun pembuatan: 2026, De volledig automatische machine is ontworpen voor het snijden van middelgrote tot grote aluminium profielen met gebruiksvriendelijke automatisering. Plaats eenvoudigweg een aluminium profiel op de machine; deze detecteert het profiel automatisch en voert de snijbewerkingen uit met uiterst nauwkeurige, door een servomotor aangestuurde materiaalpositionering. Met Excel-joblijsten via WIFI kunnen grote snijlijsten efficiënt worden ingevoerd. Bij elk aluminium profiel dat u plaatst, ongeacht de lengte, meet een lasersensor de exacte lengte. Een krachtige optimalisatie-algoritme berekent onmiddellijk de optimale snijvolgorde voor minimaal materiaalverlies. De machine verwerkt de berekende snijlijst volledig automatisch, zonder onderbrekingen. U hoeft niets in te voeren – blijf alleen nieuwe aluminium profielen invoeren. Dit systeem is een eenvoudig en snel alternatief voor dubbele verstekzagen. Voer simpelweg de gewenste lengtes en hoeken in (of importeer deze) en druk op START. De machine produceert continu nauwkeurige verstekonderdelen op hoge snelheid. • Volautomatische zaagmachine met automatische aanvoer en op lengte zagen. • Gebruiksvriendelijke bediening voor automatisch werken – werkstuk invoeren en binnen enkele seconden snijden. • Eenvoudig enkelstuks, batch- of grote Excel-lijsten verwerken. • Bundel-/meervoudige stangen snijden en tellen. • Externe WIFI-input van Excel-joblijsten met uitgebreide datamapping mogelijkheden. • Volledig instelbare zaag- en aanvoersnelheden voor maximale verwerkingssnelheid. • Automatische optimalisatiemodus met laser-meetfunctie en restmateriaal-minimalisatie (optioneel). • Automatische etikettenprinter voor onderdelen aansturing vanuit jobliste (handmatige etikettering, optioneel). • Inline, direct-op-materiaal printer zonder operator-inbreng vereist (optioneel). • Barcodes of QR-codes printen of scannen voor job-invoer (optioneel). • Geautomatiseerde servo-positie-instelling van de zaagkop tot ±75° (optioneel). Uitermate geschikt voor: • Productie van ramen en deuren • Productie van aluminium verstekconstructies • Productie van gefabriceerde aluminiumconstructies • Composietproductie • Productie van jaloezieën, zonwering en meubelen Njdpfxef Ekn Is Abvjcp • Verkoop van aluminium profielen Model: A550 Lengte: 3 m Lineaire eenheid: ProfiStop Alpha Materiaalinvoer: 1680 mm Duwcapaciteit: 20 – 40 kg Software: Optimiser HOOGWAARDIGE, IN AUSTRALIË GEFABRICEERDE MACHINES.

Kondisi: baru, jarak tempuh: 5 km, daya: 132 kW (179,47 hp), jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: otomatis, panjang ruang muatan: 4.800 mm, lebar ruang muat: 2.100 mm, Perlengkapan: ABS, filter jelaga, kunci sentral, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Nanxing NCG3021L(LL) este un centru de prelucrare CNC pentru nesting de înaltă performanță, proiectat pentru debitare, găurire, frezare și etichetare a pieselor într-un flux de lucru complet automatizat. Acest model integrează sisteme automate de încărcare, descărcare și etichetare, combinând automatizarea, inteligenta și producția digitalizată. Portul deschis permite conectarea cu software-ul de proiectare mobilier și ERP, facilitând procesarea panourilor în mod optimizat. Software-ul profesional de optimizare FCC crește eficiența tăierii, reduce risipa și sprijină managementul producției fără întreruperi. Mașina reprezintă soluția ideală pentru producția inteligentă de mobilier, reducând costul forței de muncă fără a afecta precizia sau productivitatea. Caracteristici principale • Sistem automat de încărcare și descărcare cu masă de ridicare 3 tone, dispozitiv de pre-împingere și cortină de siguranță • Sistem rotativ de etichetare cu imprimantă Honeywell – etichetarea și prelucrarea se desfășoară simultan • Masă de lucru cu vacuum (3100×2150 mm), împărțită în 10 zone pentru o prindere puternică și uniformă • Două pompe de vacuum puternice (2×7,5 kW, răcite cu ulei) pentru aspirație maximă și zgomot redus • Cadru portal cu rigiditate mare – asigură precizie și stabilitate pe termen lung, chiar și la viteze înalte • Electromandrină principală italiană 12 kW (HSK-63F, ATC, 24.000 rpm) cu suflare internă și externă pentru o îndepărtare perfectă a prafului • Schimbător automat de scule cu 12 poziții (ATC) – economisește timp, potrivit pentru operații complexe • Grup de găurire cu 21 de axuri pentru operații verticale și orizontale • Sistem de ungere automată pentru mentenanță redusă și durată de viață extinsă • Sistem de exhaustare cu puncte de aspirație față-spate pentru un mediu de lucru mai curat • Construcție axată pe siguranță: gard de protecție complet și sistem opțional de bariere optice • Sistem de control CNC SYNTEC cu interfață intuitivă, compatibil cu fișiere MPR, DXF, TCN, NC Specificații tehnice • Suprafața de lucru: X: 3100 mm / Y: 2150 mm / Z: 50 mm • Înălțime masă: 1010 mm • Viteză maximă de deplasare: X/Y 70 m/min, Z 20 m/min • Electrospindlă: 12 kW, HSK-63F, 24.000 rpm • Schimbător scule: ATC servo-controlat cu 12 poziții Nedpfx Ajxcwnbebvocp • Grup găurire: 21 axuri verticale, 2,5 kW, 4000 rpm, max. diametru găurire 35 mm • Capacitate pompe vacuum: 2×7,5 kW, 250 m³/h • Putere instalată: 47 kW • Dimensiuni mașină: 13.800 × 3.950 × 2.600 mm • Greutate: 6.000 kg • Alimentare: 380V / 50Hz / 3 faze Aplicații • Producție mobilier în panouri (bucătării, dressinguri, mobilier birou) • Debitare și găurire nesting MDF, PAL, placaj • Linii automatizate cu etichetare pentru fabrici smart Industry 4.0 Avantaje • Soluție all-in-one: încărcare, nesting, găurire, frezare, etichetare, descărcare – complet automatizate • Eficiență ridicată: software optimizat + sincronizare cu două portale pentru viteză dublă de procesare • Reducere a forței de muncă: necesită intervenție minimă din partea operatorului • Ideal pentru producția de serie: stabilitate, precizie și calitate constantă

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Nsdpfxjv Sv Eno Abvscp Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach