Gergaji potong CENTURO R800 + RVP-210

Centauro R800 + RVP-210

Kondisi: baru, Tahun pembuatan: 2024, A versatile saw for cutting wood into veneers, slats, and similar applications. Maximum workpiece height up to 400 mm. The powerful feed rate allows for very high throughput. The R800 is a robust saw. The R800 can accommodate bands of varying widths. It is equipped with mechanical feed for the workpiece. Designed to handle operations under high main motor load and at high processing speeds (up to 30 m/min) without issue. It is possible to use a band with a width of up to 80 mm. The sturdy frame of the machine is made of welded steel plate. Heavy-duty cast iron flywheels ensure maximum efficiency, and the wheels are mounted on dust-proof ball bearings. The lower section of the saw blade is specially reinforced, allowing for a higher degree of inertia without excessive loads during start-up and braking. To further enhance work consistency, the guides are precisely ground to maintain precise balance. Ljdegp I U Njpfx Aglohb Wheel diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 770 mm Table height from floor: 960 mm Table size: 1060 x 800 mm Blade length: 5530/5380 mm Max. blade width: 80 x 0.8 mm Motor power: 11 kW (15 HP) Flywheel speed: 680 RPM Blade speed: 28.5 m/sec Dust extraction: 1x Ø 100 mm, 2x Ø 120 mm Required extraction airflow: 3840 m³/h Compressed air consumption: 60 l/min Operating pressure: 6 – 8 bar Net weight: 880 kg RVP210 Feed roller height: 50 mm Drive roller diameter: 200 mm Standard towing rollers: 2 pcs Standard roller cross-section height: 300 mm Roller cross-section length: 600 mm Roller cross-section tilt: 0–45° Max. roller-blade opening: 200 mm Max. square blade opening: 420 mm Motor power: 0.37 kW Variable feed speed: 0–30 m/min Compressed air consumption: 30 l/min Operating pressure: 3–6 bar Net weight: 180 kg

Kondisi: baru, Payload capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Lhodefrzvlspfx Aglsb Rear axle: steerable Front axle: steerable Tire size 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer equipped with: - Twin turntable steering - Small turning radius - Tip-proof due to steering angle limiter - Robust construction, low maintenance - Removable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish may vary. Custom RAL colors available upon request. Different payloads and dimensions required? Please contact us.

Tahun pembuatan: 1998, Kondisi: baik (bekas), I am selling a dowel boring machine with dowel inserter Lodpjd Exwgjfx Aglehb KOCH Sprint-PTP Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programming CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available immediately

Kondisi: bekas, Tahun pembuatan: 2004, Instalasi finger joint setengah otomatis yang ringkas terdiri dari: - Mesin frais PJ 150/500 - Meja transfer untuk penyerahan manual - Press satu kanal PJ 7/6100 li Mesin frais: 2 paket/menit Press: 2 siklus/menit Panjang masuk: 150 – 700 mm Lhedpfx Agew Nbacoljb Panjang akhir: maks. 6.100 mm

Kondisi: bekas, A.COSTA LEOPARD Mehrblattkreissäge mit Doppelwelle - Maximale Schnitttiefe: 200 mm - Durchlassbreite: 350 mm Lsdpfx Ajvf Dagjglehb - 2 x 55 kW / 75 PS - Gewicht: ca. 5 Tonnen

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Karena penghentian operasi di lokasi Norderstedt, dijual tanpa pemuatan di lokasi. Ljdern R Rfjpfx Aglohb Mesin pelubang Kugler Paternoster, cocok untuk Wire-O dan indeks Format 50 x 50 cm Termasuk 2 alat pelubang Penurunan harga terakhir!!!

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves Ljdpfx Ajrmucxsglshb 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Kondisi: bekas, Tahun pembuatan: 1980, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KME 2/750L, Clamping carriage for saw frame Lodpfov Umb Esx Agljhb Inspection possible by appointment.

Kondisi: baru, Tahun pembuatan: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Ljdpscqvhwjfx Aglohb Location: Ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2009, jam operasional: 214 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, DSG Sonic Thin-cut Frame Saw – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical Data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of saw frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For basic machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height variation: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Other technical data: Cutting width with central fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss during cutting (kerf thickness): from 0.9 mm Saw blade lifespan (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): For the machine (1 m): - Idle run: 97 dB(A) Lhedjw Dp Ufspfx Agljb - Cutting: 99 dB(A) At operator’s workplace: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction system and air: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply terminal cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²