Mesin cetak injeksi

Chen Hsong JetMaster 468-MK6

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 Lredpswzy N Ujfx Al Nsp INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • L/D ratio: 22 • Calculated injection volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max screw speed: 167 min⁻¹ • Max plasticizing capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / clamping force: 950 mm / 129 kN • Injection flow: 725 cm³/s • Injection flow with dual pump (option): 906 cm³/s • Atmospheric injection flow with accumulator (option): 1,812 cm³/s • Cylinder heating power: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector stroke / force: 300 mm / 165 kN • Mould opening force: 300 kN GENERAL DATA • Pump motor power: 90 kW • Heating power: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Kondisi: bekas, Tahun pembuatan: 2015, Detail teknis: Gaya penutupan: 6600 kN Berat mesin sekitar: 45,5 t Lrsdow I E R Njpfx Al Nsp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Ledpfxey Hmfye Al Njrp Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping platen size (H x V): 1,168 x 1,144 mm Clear tie-bar spacing (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke is programmable Installed barrel heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed platen Gripper function R1 (C-) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and non-return valve; • Interface (communication, emergency stop interface); • Software with functional display pages for controlling the MuCell function; • Adapted nozzle area protection; • High-speed, position-controlled screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine comes fully equipped!! Condition: As-new condition, only 5,290 operating hours.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h Lrsdsx Nr Uxopfx Al Nop • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 60.244 h, gaya penjepit: 6.500 kN, diameter sekrup: 105 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, Engel DUO 7050/650 pico ini diproduksi pada tahun 2013. Mesin ini memiliki gaya penutupan sebesar 6.500 kN, volume injeksi maksimum 4.160 cm³, dan diameter screw 105 mm. Mesin dilengkapi dengan antarmuka robot (Euromap 67) dan berada dalam kondisi sangat baik. Jika Anda mencari mesin injeksi plastik berkualitas tinggi, mesin Engel DUO 7050/650 pico yang kami tawarkan layak untuk dipertimbangkan. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. • Volume injeksi maksimum: 4.160 cm³ • Tinggi cetakan minimum: 450 mm • Tinggi cetakan maksimum: 950 mm • Jarak buka platen: 1.400 mm • Dimensi platen penjepit (P × L): 1.510 × 1.440 mm • Jarak antar kolom: 1.100 × 960 mm • Daya motor: 161 kW • Daya pemanas: 73,9 kW • Jumlah pin listrik: 32 • Radius nozzle (di ujung): R35 • Diameter cincin pusat: 200 mm • Jumlah core: 0 • Jumlah zona pemanas: 0 • Tahun pembuatan: 2013 • Jam operasi: ca. 60.244 jam • Kondisi: Sangat baik • Status: Masih produksi Fitur Tambahan • Dilengkapi robot: Ya • Antarmuka robot: Euromap 67 Lsdpfex Nr R Hjx Al Nerp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 55.201 h, Fungsionalitas: berfungsi sepenuhnya, diameter sekrup: 70 mm, Keuntungan teknis untuk mesin: - performa dan presisi tinggi, - sepenuhnya elektrik dan hemat energi, - gerakan cepat, dinamis, dan sangat presisi berkat sistem penguncian tuas lima titik dengan pemandu pelat berfriksi rendah pada bantalan linear presisi, - unit injeksi yang efisien memungkinkan injeksi super cepat, - dokumentasi layanan dan manual pengguna lengkap, - efisiensi energi maksimal berkat penerapan teknologi penggerak servo listrik berkinerja tinggi secara konsisten. Lodpexfbdxefx Al Njrp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 43.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 194413, gaya penjepit: 2.200 kN, diameter sekrup: 55 mm, volume langkah: 475 cm³, tekanan injeksi: 1.578 batang, berat injeksi: 440 g, tinggi cetakan (min.): 300 mm, lintasan ejektor: 180 mm, langkah pembukaan: 750 mm, berat keseluruhan: 12.740 kg, kapasitas pemanasan: 13,4 kW (18,22 hp), Here, as a dealer specializing in injection moulding machines, we are offering the following well-maintained pre-owned injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Note – Tax Notice and Used Machine Advantage As of July 1, 2025, used machines will also qualify for a special depreciation allowance of 30% per year. In addition to the more favourable price compared to a new machine, you can claim the same depreciation amounts as with a new machine (keyword: "Growth Booster", § 7 section 2 EStG-E). Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 cm³ Lrodpfx Alsyc Ewxj Nsp - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max. platen distance: 1050 mm - Min. mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras: - Core pull The machine is very well maintained and can be inspected under power. Please note: any peripheral equipment shown is NOT included in the offer! The machine is available immediately. Delivery terms: - Loaded free onto buyer's truck or free delivery to site against reimbursement of freight costs. Information about our machines and company: - We only sell machines from our own stock, acquired from active production, located at our Hanover warehouse - All offered machines are checked and tested prior to removal - We do NOT sell insolvency equipment and act NOT as brokers trading third-party property - All machines offered originate from successful companies where maintenance and care are a given - All machines offered can be inspected at our warehouse

Kondisi: bekas, Tahun pembuatan: 2023, 2 x mesin injeksi Engel VC 2460/180 tech, tahun produksi 2023 Ljdpfozhudkjx Al Nsrp

Kondisi: bekas, Tahun pembuatan: 2018, 3 x Mesin Injeksi Stork Tipe Mesin Mulai Operasi Usia (bulan) 4400-2150 19.12.2002 278 Lrodpfxox Uymaj Al Nep 4400-2150 28.11.2012 159 6600-5650 01.11.2011 171

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, nomor mesin/kendaraan: X 44733, Mesin Injeksi Plastik | Stork S+ 4400-2150 - Gaya penutup: 4400 kN - Langkah pembukaan: 720 mm - Jarak antara batang pengikat: 730 x 730 mm - Tinggi cetakan: 500–1050 mm - Diameter ulir: 62 mm Ledpfxsxwva Eo Al Nsrp - Volume injeksi: 951 cm³ - Penggerak ulir elektrik Inspeksi dapat dilakukan kapan saja dengan perjanjian terlebih dahulu.