Conical twin screw extruder + new screws

Cincinnati Milacron CMT 35

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Djdpfx Agou Ttf Nsqewd Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, trans-001 Dodjug Edkjpfx Agqswd

Tahun pembuatan: 2015, jam operasional: 36.000 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Rotational speed: 600 rpm Including die head with 6 holes Including volumetric dosing system from Brabender Previous application: MB ABS, PP&PE, up to 120 kg/h Operating hours: approx. 36,000 h Please refer to the pictures and video for the condition and scope of delivery. The system is currently located in England. The system is currently disassembled. The device/system offered here has been tested and is fully functional and ready for use. The purchase price includes VAT. You will receive an official invoice. For foreign customers, a net invoice can be issued. A valid VAT identification number is required for this. Subject to prior sale. Please visit our website and also see our other offers. Dedpfxox Sq I No Agqswd The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Kondisi: bekas, Diameter penggerindaan 350 mm Panjang penggerindaan 1500 mm Tinggi pusat 175 mm Total kebutuhan daya 5,5 kW Diameter batu gerinda 500 mm Direkondisi sesuai dengan standar Kellenberger, termasuk sistem kontrol baru yang modern dan tahan masa depan. Motor servo baru pada sumbu x dan untuk spindel benda kerja. Foto-foto mesin yang telah dikirimkan dengan konfigurasi UR atau R. -Pengoperasian melalui panel sentuh sangat mudah. Dodpfeuwv Idsx Agqewd -Simbol pada panel kontrol pada dasarnya sama dengan sistem kontrol aslinya, sehingga tidak diperlukan pelatihan ulang. -Fungsi diagnosis dengan tampilan indikator PLC dan I/O digital. -Fungsi penyesuaian dapat diperluas atau diubah sesuai permintaan pelanggan. -Penyesuaian posisi spindel sesuai permintaan. -Jumlah penyesuaian maksimum baru 40 mm, dapat diperluas lagi sesuai permintaan. -Tampilan digital pada 2 sumbu. Resolusi sumbu x 0,5 my Pilihan: -Encoder dengan tampilan digital pada spindel benda kerja -Encoder dengan tampilan digital pada spindel penggerindaan (tidak ada penyesuaian tinggi dengan spindel) -Perangkat penggerindaan internal baru yang stabil, diameter 80 mm atau 100 mm dengan penyesuaian tinggi. -Peningkatan tinggi pusat hingga maks. 225 mm -Pengaturan kecepatan untuk spindel penggerindaan Termasuk: -Alat pengoperasian -Selongsong penjepit untuk chuck Aksesori tambahan lainnya tersedia berdasarkan permintaan. Mesin memiliki sistem penyesuaian yang dikontrol secara elektronik pada sumbu x dengan penggerak motor stepper. Gerakan meja secara hidraulik untuk gerakan cepat dan panjang. Kemampuan penggunaan yang serbaguna dalam produksi untuk penggerindaan luar dan dalam, atau untuk penggerindaan luar, permukaan, dan dalam dalam satu penjepitan komponen. Pilihan yang memungkinkan: -Siklus penyesuaian semi-otomatis untuk penggerindaan luar dan dalam -Kompensasi penyesuaian otomatis. -Kontrol pengukuran.

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Diameter of process piping/regeneration drain piping/compressed air piping: 50mm/50mm/8mm; maximum inlet temperature: 34°C; maximum hardness: 10/20°Fr; operating pressure min./max.: 2bar/8bar; minimum filtration rating: 5µm; maximum glycol content: 25%; dry air output: 50m³-150m³/h; dew point: below 50°C; maximum process temperature: 200°C; vessel volume: 30dm³-200dm³; maximum compressed air consumption: 300l-500l/h; machine dimensions (L/W/H): approx. 800mm/650mm/1100mm; weight: approx. 150kg. Documentation available. On-site inspection possible. Dwodpfx Asuk I Etegqsd

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya laser: 30 W, jenis pendinginan: udara, lebar total: 60 mm, tinggi total: 1.660 mm, panjang total: 80 mm, berat keseluruhan: 80 kg, The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is essential for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without advanced programming knowledge. The software automatically increments serial and article numbers after prior configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a mount and Windows operating system. Optionally, the LAS 28 laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 Watt or 50 Watt) • Wavelength 1064nm • Marking field size 150x150mm (Optional: 200x200) • Optional: Rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance detection • Signal light for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (easy preview, contour preview) Dwsdpfx Aounh Hrsgqed • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminium profile • Connection 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Dedpfxeuiykds Agqowd

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran), 3 units of docking mills Dodpjlwqtbofx Agqswd Manufacturer: Rapid Model types: G15042 Docking, G15035 Docking Years of manufacture: 2016, 2010, 2009

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, 3 UNIT JWELL - 65 EXTRUDER SEKRUP KONIK GANDA Dwjdoy Sxizepfx Agqod

Tahun pembuatan: 2023, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Zerma skärande kvarn typ GSL 180/300 IE-motor 4,0 kW, 400V, 50 Hz Dedpfx Aer E Aqvsgqewd Rotordiameter: 180 mm, rotorbredd: 300 mm Rotorknivar: 30 stycken, statiska knivar: 2 stycken Låg version, på hjul Standardtratt Sållinsats: Ø >5 mm rund