Pusat pertukangan kayu CNC

CMS Avant

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, EN_Gebrauchtmaschine_MAKA_FPM_470R_2024-06-14 Laodpfx Aevmpx Reahek

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining centre for 5-axis machining, ideal for aluminium processing and mould making. • MAKA ECM 27 R in gantry design. • Equipped with automatic central lubrication and electrical cabinet with climate control unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable operator panel BWO RC 910. Technical specifications: Working ranges / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min Ledpfx Aot Dl U Eeahjak A/B axis: 10,000 °/min 1 milling spindle, 11 kW, Infinitely variable speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angle drilling heads (fixed-position coded), SK40. 1 steel table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m³/h, with 250-litre tank. 1 vacuum clamping circuit. Occupational safety: With protective enclosure at the rear of the machine, side access door; the enclosure is open at the top. Slat curtain on the operator side and safety bumper on the front of the table. Repairs / Overhauls before delivery: - Maintenance Electrical requirements: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Installation of an RCD (residual current device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Used Machine MAKA PM 270 R 5-Axis CNC Machining Centre for processing wood, plastic, and aluminium. Machine in gantry design, equipped with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) Working areas in 3-axis mode, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm (with 180 mm fixture height – vacuum suction) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse rate: X/Y-axis 45 m/min; Z-axis 24 m/min; A/B-axis 10 m/min Milling unit: - 1 universal unit for 5-axis milling with a 50° inclined head, maximum power 12.5 kW, infinitely variable speed up to 17,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 1 chain tool magazine with 32 positions for tools up to D = 90 mm. With sorted placement, max. up to 160 mm (occupies three positions). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 control circuits for stop "raise/lower" - 2 control circuits for sliding rail "raise/lower" - 2 control circuits for pneumatic "clamping/release" - 2 vacuum control circuits with push button for clamping, automatic reset via CNC programming - 1 chip conveyor integrated in the base frame for removal of chips and small offcuts up to approx. max. 100 x 100 x 100 mm Tools: Tools are not included in the scope of delivery! The system can also be supplied with various tool holders upon agreement. We are happy to prepare a separate offer for this. Vacuum supply: - 1 pc. vacuum pump, approx. 140 m³ suction capacity, including tank with 250 litres capacity for rapid vacuum build-up - 10 vacuum supports with various suction plates - Various clamping fixtures for posts and steam-bent parts - Stops raising/lowering for component positioning Lajdpfx Aaovmywqshok Miscellaneous: - Automatic central lubrication - Control cabinet with air conditioning unit - Projection laser Occupational safety: - Moving safety cabin with safety bumpers on the operator side.

Kondisi: baik (bekas), Tahun pembuatan: 2005, Used Machine MAKA PE 70 5-Axis CNC Machining Center for Wood and Plastic Processing. Gantry-style machine with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. 10.4" LCD display 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cup) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y-axis 45 m/min. Z-axis 24 m/min. A-/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power: 7.5 kW (S1), 10 kW (S6), infinitely variable speed up to 22,000 rpm, HSK-F63 milling spindle, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine with 20 slots for tools up to D = 90 mm; with sorted placement up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic quick-release system for rapid positioning. - 2 control circuits for stops “raise/lower” - 2 control circuits for sliding rail “raise/lower” - 2 control circuits for pneumatic “clamp/release” - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 integrated chip conveyor in the base frame for extraction of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Miscellaneous: - Automatic central lubrication. - Switch cabinet with air conditioning unit. Occupational safety: Laodpevr A A Tsfx Aahek - Moving safety enclosure with safety bumpers on operator side. Repairs / maintenance before delivery: - Maintenance newly performed. - Lamella curtain on portal new - Sliding window new - Y-axis energy chain new - Z-axis energy chain new - Various cables and air hoses renewed.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Maka MM 7 T / 5 axes, Year of manufacture: 2000, Control: Siemens 840 D, Travel range X/Y/Z: 2x1500/2000/600 mm, Gantry milling machine for light machining, Milling spindle: 7.5 kW, NC milling head, A axis: 540°, B axis: +/- 100°, Tool changer, 10 positions, HSK F 63 tool holder, Lsdpfxjwuy Aho Aaheak Saw blade diameter max. 170 mm, Spindle speed up to 24,000 rpm, X/Y axis: rack and pinion drive, Z axis: ball screw, Vacuum table, Aluminium flat table,

Kondisi: bekas, Tahun pembuatan: 2005, 5-AXIS MACHINING CENTER BALESTRINI MOD. IDEA GRANDE – CE COMPLIANT – USED - Axis travel: X: 1600 mm Lodewrb S Ejpfx Aaheak Y: 3000 mm Z: 700 mm A: unlimited C: 400° - Maximum workable dimensions on two tables simultaneously: 2800 x 1100 x 700 mm - Maximum workable dimensions on one table (pendulum cycle): 1300 x 1100 x 700 mm - LS 44 head with no. 4 x 7.5 kW Colombo electrospindles, air-cooled - 18,000 rpm - No. 2 Becker vacuum pumps, 100 m³/h each - NUM CNC control - Alphacam dongle - Enclosure - Year: 2005