Pusat penggilingan balik CNC
CMZ TTL - 66 - 66 - T1Y - T2Y

Tahun pembuatan

2021

Kondisi

Bekas

Lokasi

Idstein

Pusat penggilingan balik CNC CMZ TTL - 66 - 66 - T1Y - T2Y

Tampilkan peta

Data mesin

Nama mesin:: Pusat penggilingan balik CNC

Pabrikan:: CMZ

Model:: TTL - 66 - 66 - T1Y - T2Y

Tahun pembuatan:: 2021

Kondisi:: hampir baru (bekas)

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Walramstrasse 27, 65510 Idstein, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A20256875

Pembaruan:: terakhir pada 10.10.2025

Deskripsi

This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW.

The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets.

A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included.
Ffodpfx Adoxmhdnsgjt

For further details, please refer to the attached brochure or contact us directly.

Equipment:
- LPS for left spindle
- Reducing tube for left spindle
- Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle
- Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle
- Tool presetter
- Side-mounted chip conveyor (standard version)
- Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter
- Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter
- Coolant washing nozzle
- TA/06000/10 coolant chiller with 8,000 W cooling capacity
- Machine status indicator
- Tool life management
- Tool load monitoring
- Programmable automatic parts catcher (pneumatic)
- The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction
- Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor
- Coolant supply through right spindle
- Interface for bar feeder (unimag)
- Prepared for extraction system, connection flange Ø100

The machine comes with a chip conveyor, coolant unit, and tool package.
It can be inspected under power and is available immediately.
Operated in single-shift mode only.

Further information upon request.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

20256875-01.pdf

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2006

34 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 6126 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin CNC bubut MORI SEIKI SL 253 BSMC / 1000

Root

11.253 km

Mesin CNC bubut
MORI SEIKISL 253 BSMC / 1000

Hubungi

Iklan kecil

Mesin penggiling sisi gigi Reishauer RZ 362

Jerman

11.023 km

Mesin penggiling sisi gigi
ReishauerRZ 362

Hubungi

Iklan kecil

2005 FANUC A04B-0094-B111#BD FANUC ROBODRILL α-T2 STAMA

Viviez

11.782 km

2005 FANUC A04B-0094-B111#BD
FANUCROBODRILL α-T2 STAMA

€7.000

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 2005, Allgemeine Informationen: - Modell: ROBODRILL α-T2 STAMA - Seriennummer: 046VH155 - Baujahr: 2005 - CNC-Steuerung: FANUC (Modell A04B-0094-B111#BD) - Gewicht: 2.200 kg - Stromversorgung: 200 V, 50/60 Hz, Drehstrom - Leistungsaufnahme: 10 kVA ----- Bearbeitungsmöglichkeiten: - Funktionen: - Fräsen (Hochgeschwindigkeits- und Hochpräzisionsfräsen) Fodpfx Asuru I Rjdgjft - Bohren - Gewindeschneiden mit starrem Gewindebohrer (Rigid Tapping) ----- Verfahrwege: - X-Achse: ca. 500 mm - Y-Achse: ca. 400 mm - Z-Achse: ca. 330 mm ----- Spindel: - Spindelaufnahme: BT30 - Maximale Spindeldrehzahl: bis 10.000 1/min ----- Werkzeugwechsel: - Typ: Automatischer Werkzeugwechsler - Werkzeugwechselzeit: ca. 1,6 Sekunden ----- Eilgang: - Eilgangsgeschwindigkeit: 54 m/min auf X-, Y- und Z-Achse ----- Besondere Merkmale: - Kompakte Bauweise mit hoher Steifigkeit - Hohe Produktivität durch ultraschnelle Bohr- und Gewindeschneidzyklen - Wartungsfreundlich dank integrierter FANUC-Diagnoseschnittstelle - Kompatibel mit automatisierten Fertigungszellen (Kooperation mit STAMA)

Lihat detail

Iklan kecil

Olching

11.014 km

Pusat permesinan 3-sumbu
AxonVMC1060

Hubungi

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 650 mm, produsen pengendali: Heidenhain, model controller: TNC640, Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 positions Working area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Ffsdpfx Astpm Stjdgst Miscellaneous Rapid traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant filtration: Oil separator Electrical cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40

Lihat detail

Iklan kecil

Alat mesin penggiling Walter Helitronic Power

Sonnenbühl

11.171 km

Alat mesin penggiling
WalterHelitronic Power

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Mesin CNC pengasah alat Walter Helitronic Power FH, dengan pemuat palet silinder, penukar cakram 8-posisi, pemisah kabut elektrostatis, sistem pemadam kebakaran, pompa suplai oli, perangkat lunak Walter Window-Mode dan Toolstudio, paket perangkat lunak: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, dengan persiapan sistem hidrolik (lunette). Spindle penggiling (satu spindle) digerakkan langsung dan dilengkapi pendingin oli. Motor poros berlubang pada sumbu A dengan kecepatan putar 0-750 rpm. Sumbu C, X, Z, dan A telah direkondisi pada tahun 2022. Ffedpjx E Dfbofx Adgst

Lihat detail

Iklan kecil

Hornberg

11.241 km

Mesin bubut tipe Swiss
TraubTNL20

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock / fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Toolholder stations quantity 8 driven tools quantity 8 Max. speed rpm 12,000 Holder diameter mm 45 Drive power 100% / 40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Fjdjwuddvopfx Adgoft Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back-working attachment Toolholder stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle capacity mm 20 Max. speed rpm 10,000 Drive power 100% / 40% duty cycle kW 3.0 / 5.5 Torque 100% / 40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system basic unit Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x width x height mm see installation plan* Weight kg 5,000* Connected load kW 40 (47 kVA)

Lihat detail

Iklan kecil

Mesin bubut CNC Boehringer-VDF 250 CM x 3000 mm

Offenbach an der Queich

11.221 km

Mesin bubut CNC
Boehringer-VDF250 CM x 3000 mm

Hubungi

Kondisi: bekas, Tahun pembuatan: 2000, Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turning length: 3,000 mm Control: Siemens 840 D Number of tool stations: 12 Driven tools - number: 6 Spindle bore: 103 mm C-axis: yes Scope of delivery - Basic machine: SINUMERIK 840 D 3 controlled axes Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turret with 12 VDI shank holders, Ø 50 mm Single-stage AC main drive, 53 kW, 50% duty cycle Speed range: 30 - 3,000 rpm Main spindle head size 8 Fsdpswp S Sqefx Adgsft Clamping actuator for clamping devices Chip conveyor TURNING LENGTH: 3,000 mm 12 VDI shank holders DIN 69880-50x78, of which 6 positions can be equipped with driven tools, power: 6 kW at 60% duty cycle, speed range: 20–2,500 rpm 2 gearbox speeds C-AXIS Speed range: 0–20 rpm Max. programmable angle: 9999.999° Working area as per workspace diagram POWER CHUCK 3 NHF 315-82 A8 Mfr. FORKARDT with centrifugal force compensation Outer diameter: 315 mm, bore: 82 mm with hard top jaws, ground, bar material max. Ø 63 mm including draw tube and mounting

Lihat detail

Iklan kecil

Contamine-sur-Arve

11.428 km

Mesin bubut tipe Swiss CNC
TORNOSDT 26

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 195 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 25.4 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 8.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 [rpm] TOOL HOLDER 2 - Number of positions: 8 SUB OPERATIONS Ffsdpfx Adjuha U Hogst - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,912 x 1,300 [mm] - Machine height: 1,720 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Power-on hours: 44,140 [h] - Operating hours: 28,118 [h] - Spindle hours: 15,281 [h] EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Driven tool motorization at: S11, S51 - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company engaged by the buyer.

Lihat detail

Iklan kecil

Mesin bending lembaran logam DAVI 4 roll plate rolling machine

Cesena

11.012 km

Mesin bending lembaran logam
DAVI4 roll plate rolling machine

Hubungi

Iklan kecil

Mesin bubut tipe Swiss CNC TORNOS EvoDECO 16/10

Bienne

11.333 km

Mesin bubut tipe Swiss CNC
TORNOSEvoDECO 16/10

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 5.650 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar feeder Fanuc 31iB - 5,646 operating hours Country of manufacture: CH Voltage: 400V Dimensions: 2135x1250x2114 mm Net weight: 2,700 kg TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Maximum bar diameter: 16 mm Maximum machining length: 180 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Maximum bar diameter: 16 mm Spindle speeds: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool Station 1 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Tool Station 2 Number of positions: 5 Number of driven positions: 3 Driven tool speed: 8,000 rpm Fedjkhnqgepfx Adgjft Endworking Unit Number of positions: 4 Number of driven positions: 3 Driven tool speed: 8,000 rpm Backworking Number of positions: 6 Number of driven positions: 6 Driven tool speed: 8,000 rpm Electrical supply Line voltage: 400V Technical data is provided without obligation; errors and omissions excepted.

Lihat detail

Beriklan di sini