Mesin Pembubut Horisontal

CMZ TTL-66-66-TTY-T2Y

Kondisi: siap digunakan (bekas), Dijual: konveyor sabuk seperti pada foto, panjang sekitar 8 m. Lebar sabuk: 0,3 m. Tersedia opsi transportasi. Lrjdpfx Aer Nvx Usgljg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with two high-performance spindles (66 mm bar capacity), two tool turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, as well as Y-axis functionality for both the upper and lower turrets. A 35-bar high-pressure coolant system with integrated filtration and an additional tank is also included. For further details, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for left spindle - Hainbuch AXFIX 65 (standard) collet chuck 2703/0008 for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75 μm filter - Coolant washing nozzle - TA/06000/10 coolant chiller with 8,000 W cooling capacity Ledpfx Agexmhdnelorg - Machine status indicator - Tool life management - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece removal unit is equipped with a gripper that opens and closes pneumatically for part extraction - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke; end position detected by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Prepared for extraction system, connection flange Ø100 The machine comes with a chip conveyor, coolant unit, and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information upon request.

Kondisi: bekas, Centre height 102 mm Lrsdpfx Aowbi Hpjgljg Centre distance 450 mm Spindle bore 25 mm Spindle speed: 220 - 2600 Accessories have not been checked for completeness Cabinets are not included in the scope of delivery.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Constructed entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Fatek, HMI by Weintek Electrical connection load: 10.55 kW Lodpfx Agov U A Izjlorg Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic immersion transducer with dual-side sonication - Output: 2,000 W effective / 4,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 35.598 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07400004031, daya motor spindle: 20 W, kecepatan spindel (min.): 3.250 rpm, kecepatan spindel (maks.): 5.000 rpm, saluran batang: 90 mm, berat keseluruhan: 10.000 kg, Capacità barra 90 mm - 2 torrette motorizzate a 12 posizioni - Asse Y sulla torretta superiore - Contropunta - Controllo Siemens 840D power line - Macchina in condizioni perfette, sempre utilizzata con olio - Completamente attrezzata e in ottimo stato - Caricatore di barre LNS Sprint S2. Lodpfsuyx Hzjx Aglorg

Kondisi: bekas, Traglast: 0/4 kg Armlänge: 1.500 mm Anzahl der Achsen: 6 Lrodoh Au Inepfx Aglsg Wiederholgenauigkeit: 0,05 mm Robotergewicht: 250 kg Montage: Boden

Kondisi: bekas, Tahun pembuatan: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X axis): 180 mm - Column swivel (B axis): -1 to +11 degrees Machine - workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - X-axis feed rate: 12,000 mm/min - Workpiece table (C axis): 0-400 rpm - Cutter (C2 axis): 0-300 rpm - Spindle stroke (A axis): 500-3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load of the machine: 35 kVA - Cable cross-section: 35 mm² Lodsudc S Hopfx Agljrg - Fusing: 80 A

Kondisi: bekas, Tahun pembuatan: 2008, Kontrol Siemens 840D Lodpfxjwzypns Aglsrg

Kondisi: sangat baik (bekas), Top maintained Mitutoyo contour measuring machine Contracer Model CV3100 H8 Measuring ranges: Z = 50 mm (column height 550 mm) X = 200 mm Lodpop Ecgiofx Agljrg The machine has been completely overhauled and serviced. PC (newly installed Windows 10) and nearly up-to-date Formtracepak software (version 5.6) have been installed. Measuring table (50x100 mm) and self-centering vise available as options (€ 2,000) Installation, calibration, and operator training available upon request Price includes delivery within the EU

Kondisi: bekas, Tahun pembuatan: 2007, 0 Lrsdpfx Ajw Rf S Ssgleg