Penempaan Radial Panas yang dirombak total

CNC GFM SX-16

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fanuc Robodrill α-D21SiA5 Machining Centre TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Manufacturer Number: A04B-0102-B114#BDH Year of Manufacture: 2013 Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Gsdpfxexflq As Aaboua Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): - Fanuc Robodrill α-D21SiA5 Machining Centre - 4th Axis Rotary Table - Coolant Pump and Chip Tray - Precise scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currentness of the particulars.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, de Guedpfsv Igghjx Aabja

Tahun pembuatan: 1977, Kondisi: bekas, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Control system: Machine weight: approx. 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Machining range: Diameter from 700 mm to 1500 mm Standard gauge for machined wheelsets: 1435 mm Track gauges: 1435 mm, 1524 mm, 1676 mm Length of machined wheelsets: 1640-3000 mm Wheelset running diameter: 700-1500 mm Drive diameter: 350-1350 mm Wheel tyre width: up to 140 mm Overall dimensions of the wheelset lathe: 8700 x 3600 x 3250 mm Total installed power: 172 kW Guedpfx Aasuddglsbja Machine weight: 59,200 kg Adjustment movement speeds: Lifting and centering device: 2500 mm/min Headstocks: 1320 mm/min Quills: 550 mm/min Carriages in longitudinal direction: 1300 mm/min.

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. Gujdpfx Aaehzbipeboa - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, jumlah sumbu: 5, TOS Varnsdorf WHN130 5-sumbu ini diproduksi pada tahun 2007. Ini adalah mesin bor dan frais horizontal dengan ukuran meja 1800 × 1800 mm dan diameter spindle 130 mm. Mesin ini dilengkapi dengan meja putar dan dikendalikan oleh sistem NCT-104. Pertimbangkan untuk membeli mesin bor TOS Varnsdorf WHN130 ini. Silakan hubungi kami untuk informasi lebih lanjut. • Sistem kontrol: NCT-104 • Meja: berputar, 1800 × 1800 mm Godpfx Ajx Imtaeabjua • W (penjorok spindle): 570 mm • Diameter spindle: 130 mm

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), A Spinner simultaneous turning center with three turrets and comprehensive accessories, spare parts, and tooling is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm. Rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700 rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: stations: 3x12, speed: 8,000 rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2,880mm/2,130mm/1,990mm. Weight: approx. 7,500kg. Operating hours: 27,102h. Control: Fanuc 31i. Including Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, an extensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Gujdpsua E Trofx Aabea

Tahun pembuatan: 2010, Kondisi: baik (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 1989, nomor mesin/kendaraan: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration, equipped with Müdata, Mütrans, without warp beam rack, exceptionally clean, sourced from Germany, second-hand. NF42 in 4/42mm from 1988-1990: AN. No.: 88.04.017 H ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 88.04.169 D ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros No. 223 Guodjr I Am Hepfx Aabja AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts, very clean – 7,000 Euros

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 Guodpfx Asnh Rnuoaboa - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Gusdpfx Aaeifi D Tsboa Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár